using computer simulations and homogenization techniques. I will apply the finite element method for the solution of the nonlinear magnetoâ??mechanical boundary value problem. The tool for generating a dataset
means of COMSOL multi physics, a commercial program that uses the Full Vector Finite Element Method (FV-FEM). The computational results indicate that the relative sensitivity
invasive procedure that is well-tolerated by patients. Moreover we used the finite element method to simulate the temperature distribution in the breast tissue during the treatment. This proposed model
available from the archaeological reconstruction, a numerical linear elastic macro model within the finite element method has been developed for all structural simulations within this study. The walls are assumed
identified for stability analyses. The slope stability analysis was made by three-dimensional finite element method, Rocscience based RS3 software. The slope stability analyses in terms of safety factor
liquid flow rate and the input electrical current. Results show that the 2D Finite Element Method Magnetics (FEMM) software accurately predicts the obtained values of the fringe resistance
start and propagation phase in Datong coal [1]. On the basis of the finite element method (FEM) and the J-integral, the formula for the model I fracture toughness
known function of time. Due to the complexity of the nonlinear equations, the finite element method is used to solve them. The results are produced numerically and visually. Through
primary focus is on strength-deformation analysis using the finite element method (FEM), which allows the behaviour of the femur implant system to be determined. To compare, FEM analysis
These guidelines are generally empirical and therefore lack scientific validation. Using the 3D finite element method, this paper aims to compare the stress distribution on short implants with reverse
Karman nonlinear strains using modified C0 continuity. A direct iterative based nonlinear finite element method combined with mean centered first-order perturbation technique (FOPT) proposed for the Functionally Graded…
drill string in horizontal wells and the excitation parameters is studied using finite element method. The results show that reducing the friction coefficient, increasing the excitation frequency and amplitude
static equivalent loads. Static analysis is probably the most common application of finite element method the term structural (structure) implies not only civil engineering structures such as bridges & buildings
intertrochanteric curved varus osteotomy with several types of lesions were investigated using a finite element method. The contact pressure decreased and the load transfer path widened after this osteotomy
beams under short-term static loads. The numerical analysis was performed using the Finite Element Method (FEM). All calculations were carried out in the environment of the Abaqus. The main
cross-section of 36 m span crane beam can be analyzed by finite element method. Firstly, analysis of the stress and deformation is completed under the dangerous condition of crane
tons, 18 mm diameter cable, 2 m length and six strands), and Finite Element Method. Three static loading tests were performed, thereafter, an underground excavation was simulated with several wedges
scheme. to the present end, we envisioned a feedback connectionbetween the corner-line finite element method, wont to predict the positions of the free surfaces of theextrudate, and therefore
present end, we envisioned a feedback connection between the corner-line finite element method, wont to predict the positions of the free surfaces of the extrudate, and therefore the controller
structure beneath crust was modelled to simulate their crustal deformation by employing a finite-element method and applying boundary conditions of the east-west horizontal compression. The result shows that
this study, we have developed a realistic stent-graft deployment simulation using the Finite Element Method of 3D nitinol stent in a patient-specific Thoracic Aortic Aneurysm (TAA). This work
estimation is presented. Additionally, the proposed model is implemented into LS-DYNA code Finite Element Method. In order to verify the simulation results a corresponding experimental tests were conducted using
thin veneer materials and its thickness on their biomechanical behavior using the 3D finite element method to find out which of all these models have a better performance. The distribution
For authors and organisers
Publish, present and keep up with your field
Find the right journal for your paper and submit your manuscript.