Comparison of ZnMgO/ZnO core-shell structures with ZnO nanorods for UV detection
structure of the ZnMgO/ZnO CS and ZnO NRs were inspected under X-ray diffraction (XRD) spectroscopy. The CS structures had a c-lattice constant
Articles, journals and conferences in one search. An exact title, DOI or ISSN is listed first.
In the search box: "exact phrase" · -leave out · OR · prefix* · title: author: journal:
structure of the ZnMgO/ZnO CS and ZnO NRs were inspected under X-ray diffraction (XRD) spectroscopy. The CS structures had a c-lattice constant
second- order, metal/semiconductor grating-based device is desirable as a means to efficiently diffract the laser light through the substrate, as reported in the near-IR. Although such
developed that explains the image formation using SPPs. It was found that the diffraction caused by the nanoparticle, locally decouples the SPP-wave from the metal-dielectric interface. Hence
fiber lasers. We have performed analyses of power scaling limits of single aperture, diffraction limited fiber lasers and understood the physical mechanisms that limit scaling beyond
reduce the corresponding equations to the equations for the light of diffracting in the CLC polarization only. The dispersion equations determining connection of the EM and DM frequencies with
mode at T=25 o C, with near-diffraction-limited beam quality (M 2 =2.3). The highest power was obtained from a device with a single tapered section whose width
carrier gas. The structural properties of the films were studied by X-ray diffraction (XRD) and scanning electron microscope (SEM). It was clear from XRD spectra and SEM study that
designed. At such high stretching, the number of base pairs included in the diffraction limit is minimized thus providing the best barcode resolution obtainable using conventional epifluorescence (about 1 kilobase
films specified above type on a tunnel microscope. Electron-microscopic researches and X-ray diffraction analysis show crystallite sizes in investigated films lie in a range of 50-500 nanometers
structure and properties of PNCs has been evaluated through ultraviolet-visible absorption, X-ray diffraction and fourier transformed infrared spectra, scanning electron and atomic force microscopy, simultaneous…
study confirmed that no chemical interaction took place during entrapment process. The X-ray diffraction study indicates the amorphous dispersion of the drug after entrapment in to microspheres. Zeta potential
dielectric and piezoelectric properties of the system were investigated. Phase analysis using X-ray diffraction (XRD) indicated that the phase structure of sintered PZT-PMN-PNS ceramics was transformed from
weak reductive environment. The as-synthesized phosphors were investigated by X-ray powder diffraction analysis (XRD), scanning electron microscope (SEM) and Fluorescence spectrophotometer. The results indicate that…
examined. The structure of the ZnO nano rod was studied with X-ray diffraction. The surface morphology was studied with Scanning Electron Microscope. The absorption and transmittance was studied with
characterized by elemental analyses, molar conductance, Fourier transform infrared spectra (FTIR), X-ray powder diffraction (XRD), and thermogravimetry and differential scanning calorimetry (TG-DSC). The composition of…
sodium chloride solution. Synthesized microwires were characterized by scanning electron microscopy (SEM), X-Ray diffraction (XRD), and UV-Vis spectrophotometry. The SEM characterization confirms the formation of…
aqueous solution at room temperature. The grown crystals were subjected to powder X-ray diffraction analysis, confirming that the crystalline nature of the crystal. UV-Vis-NIR spectra have been
characterized by Fourier Transform Infra Red (FTIR) spectroscopy, UV-visible spectroscopy and X-ray diffraction techniques. Electrochemical impedance spectroscopy (EIS) was used to confirm the configuration and…
Lipid multilayer gratings are a new type of optical transducer based on fluid diffraction gratings on a surface. Tiny oil droplets regularly spaced at the wavelength of visible light function ... diffraction gratings…
abundance of flakes grown on the 3D porous copper architecture, while X-ray diffraction (XRD) and energy-dispersive X-ray spectra (EDS) were used to determine the crystal structure
energy distribution of the frequency output with zero intermediate frequency signals. We use Fourier diffraction and sagittal iterative reconstruction algorithm to reconstruct microwave tomographic image and determine…
NaLa0.95Eu0.05(MoO4)2 have been synthesized by sol-gel method assisted bymicrowave. X-ray diffraction and fluorescence spectrophotometer were used to analyze and investigate the phase structure and luminescent properties
adsorbent of 2 g/L. Material OSA was characterized by several methods such as diffraction of x-ray (DRX), electronic scan microscopy (MEB), electronic microscopy in transmission
spectroscopy (EDAX) spectrum showed strong peaks of Fe and O. X-ray diffraction patterns (XRD) indicated that the naked magnetic nanoparticles were pure Fe3O4 with a spinel structure
Nanosized Titanium dioxide (TiO2) powder was synthesized via sol-gel method using
For authors and organisers
Find the right journal for your paper and submit your manuscript.