kinetics of adsorption can be suitably described using a pseudo second-order model. The Langmuir, Temkin, Freundlich and Dubinin-Radushkevich models were tested to describe the equilibrium data
adsorption capacity decreases with increasing biosorbent mass. The equilibrium adsorption isotherm models of Langmuir and Freundlich were executed based on the experimental datas. The equilibrium adsorption isotherm…
Langmuir adsorption isotherm model, but for Fe3+ adsorption, it was found that Freundlich adsorption isotherm model is the best model to describe it. The selectivity order of the adsorbent
been characterized by chemical analyses, XRD and FTIR. Four two-parameter isotherm models namely Langmuir, Freundlich, Dubinin–Radushkevich and Temkin, and four three-parameter isotherm models namely Redlich- Peterson…
size of adsorbent and temperature.MLP was found to have good adsorption capacity. Freundlich, Langmuir and Temkin isotherm models were used to test the equilibrium data. The best fitting isotherm models ... found to be…
batch system. The equilibrium adsorption data were analyzed by Langmuir, Freundlich and Temkin adsorption isotherm models. The pseudo-second order, Elovich and intraparticle diffusion kinetic models were applied
pollutants will enable us to draw the isotherm and to compare different common models such as Freundlich or Langmuir. The parameters of adsorption have been deduced from the more fitting
Acid black-7 has been used as the adsorbate. Adsorption data were modeled using Langmuir, Freundlich, Temkin and Dubinin-Radushkevich adsorption isotherms. The data were also fitted to kinetic models
dyes onto activated carbon were obtained from batch adsorption experiments. Two parameter isotherm models including Langmuir, Freundlich, Temkin and Dubinin-Radushkevich were employed for fitting equilibrium data. Three…
sorption by Aspergillus niger and Eichhornia crassipes earned good fits for Freundlich and Langmuir models. Further desorption techniques were studies to recover the loaded pollutants. This study has shown
sorption by Aspergillus niger and Eichhornia crassipes earned good fits for Freundlich and Langmuir models. The analogy of percentage removal of dye were determined between physical phenomena and the immobilized
follows pseudo-second order kinetic model and obeys Langmuir (R2=0.9637) and Freundlich (R2=0.9995) kinetic models. Based on the results, a novel synthetic protocol of important industrial design
model, suggesting chemisorption mechanism, while the biosorption mechanism was film diffusioncontrolled. Freundlich and Dubinin-Radushkevich (D-R) isotherm models provided the best correlation ( > 0.99) of the…
wastewater taken from BDTSC was 96.9%, 95.5%, 97.1% and 88% respectively. Langmuir and Freundlich adsorption isotherm models were used to simulate the equilibrium data for the adsorption process. The result
time, solution pH, initial dye concentration, dosage, temperature on biosorption capacity.Adsorption data were modeled using the Freundlich, Langmuir, Tempkin and pseudo first order and pseudo second order kinetic…
adsorbent used and the initial pH of the solution. Adsorption data were modeled using the Freundlich and Langmuir adsorption isotherms and followed first order kinetic equation ... with a relatively good correlation…
increase in contact time, dosage of adsorbent and initial pH. Adsorption data were modeled with the Freundlich and Langmuir adsorption isotherms, various first order kinetic equations viz. Lagergren, Natarajan-Khalaf
adsorbent. The GRL dye adsorption data we re fitted to various isotherm models such as Langmuir, Freundlich and Temkin. It was found that Langmuir model fitted well. The optimum
statistical analysis of bio-sorption using Response Surface Methodology (RSM) was studied. The quadratic model for Central Composite Design (CCD) has fitted well to the experimental data. The optimum ... temperature =…
rapid during initial 105 minutes and attained equilibrium. Adsorption isotherms have been modeled by Langmuir, Freundlich, Temkin and Redlich–Peterson isotherms. The data indicate that prepared adsorbent surface sites
adsorbent, it appears the results are consistent with an adsorbed phase confined to monolayer model with edgewise orientation of methylene blue (MB) molecules on the surface. Composite isotherms were calculated…
series of batch adsorption at various initial concentrations of CHCl3. Langmuir and Freundlich adsorption isotherm models were employed to fit the adsorption characteristic of the adsorbent. Maximum adsorption capacity…
heavy metals followed both the Langmuir (r2 > 0.988) and Freundlich (r2 > 0.993) isotherms. A comparison of kinetic models applied to the biomass such as Lagergren, Ho and McKay, Elovich
contact time, adsorbent dose was investigated at room temperature. Langmuir and Freundlich adsorption isotherm models used to test equilibrium of adsorption. The process of adsorption was found to be fast
conducted at various initial concentrations of CHCl3 (10-40) mg/L. Langmuir and Freundlich adsorption isotherm models were employed to fit the adsorption characteristic of the adsorbent. The removal efficiency…
For authors and organisers
Publish, present and keep up with your field
Find the right journal for your paper and submit your manuscript.