minutes to 40 hours. Structural analysis by X-ray diffraction and transmission electron microscopy depict that the dots have average diameters between 2 and 10 nm. The exciton Bohr radius
pulsed laser deposition (PLD) with varying temperature, substrate and oxygen partial pressure. X-ray diffraction (XRD) was used to identify the phases present. For example, when the film was prepared
physicochemical methods were employed to study the structure by using wide angle X-ray diffraction (WAXRD) analysis and small angle X-ray diffraction (SAXRD) analysis coupled to neutron diffraction
coating morphologies are observed on SWNT and characterized using electron microscopy and X-ray diffraction. In the semi-dilute polymer concentration regime subjected to shearing, PAN extended-chain tubular coatings
were characterized by using the X-ray diffraction (XRD), scanning electron microscopy (SEM) and energy dispersive X-ray analysis (EDAX) and magnetization measurements. From the room temperature
represented the main phenomenon during these heat treatments. Differential scanning calorimetry (DSC), X-ray diffraction, optical microscopy, transmission electron microscopy, scanning electron microscopy…
purpose scanning electron microscopy, energy dispersive X-ray spectroscopy, micro Raman spectroscopy, X-ray diffraction, atomic force microscopy and nanoindentation measurements were carried out. Wear resistance was…
chemical characterization were also carried out using X-ray fluorescence and X-ray diffraction. Furthermore, 2 4 factorial experimental design with 3 replicates each was used to derive a froth ... concentration of gold…
spectroscopy (EDX), while their size was obtained with the help of X-ray diffraction and transmission electron spectroscopy (TEM). The influence of the tungsten oxide on the structural and morphological
obtain SiC ceramics via carbothermal reduction. The ceramics are further characterized by X-ray diffraction (XRD) analysis and field emission scanning electron microscopy (FESEM
respectively. The wurtzite structure was confirmed by the x-ray diffraction measurement. The PL spectrum obtained by exciting the ZnO nanorods with the He-Cd laser has two peaks
topography and morphology of the nanostructures. Also, they have been analyzed using X-ray diffraction (XRD); the grin size, full width half maxima, miller indices, strain, dislocation density, lattice constant
grown on (001) LaAlO 3 single crystal substrate by pulsed laser deposition. X-ray diffraction (XRD) results confirming that the film has good crystalline quality, single phase, and c-axis
characteristics of hydration products were analyzed by scanning electron microscope (SEM), X-ray diffraction (XRD), and thermogravimetry analysis (TGA). Our results show that the combination of metakaolin and Nano clay
crystalline size of 4 to 40 nm is achieved. X-ray diffraction pattern of samples show anatase phases of TiO 2, up to 600 °C. At 800 °C, the phase ... rutile. The diffraction peak at 25.22°, 25.49°and 25.6° observed from…
doped in KDP single crystals by using slow evaporation solution technique. Powder X-ray diffraction (XRD) studies were carried to confirm the crystal structure and lattice parameters. X-ray study ... related parameters…
crystal (drop) sizes the lower the temperatures of phase transitions. The X-ray diffraction analysis revealed the presence of hexagonal modification of CuCl nanocrystals at room temperature, while hexagonal modification
selected to replace silver ion in this compound. The X-ray diffraction data of the samples have been analyzed using Willamson-Hall method. The peaks of X-ray profile have
water. The adsorption was confirmed by the use of various techniques like X-ray diffraction (XRD) analysis, Fourier transform infrared (FT-IR), Brunauer, Emmett and Teller (BET). 90% fluoride removal
Nano composites. The nanocomposites were characterized by scanning electron microscope (SEM) and X-ray diffraction (XRD). mechanical Test were carried out in order to identify the properties The results reveal
structures and morphologies of MgO and ZnO particles have been characterized by X-ray diffraction (XRD), scanning probe microscope (SPM) method. Ultra fine sized powders with a tendency towards aggregation
thermally stable up to 184.140c .The grown crystal was examined by X-ray diffraction to determine its crystalline nature. Second harmonic generation efficiency of the powdered Thiosemicarbazone of benzophenone
measurements, structural properties by XRD, and surface morphology by SEM microscopy analysis. X-ray diffraction shows crystallized films corresponding to In2S3 phase. According to SEM image, the film is very…
solid dispersion was evaluated by differential scanning calorimetry and powder X-ray diffraction analysis. Itraconazole was released at a much higher rate from solid dispersion and physical mixture as compared
For authors and organisers
Publish, present and keep up with your field
Find the right journal for your paper and submit your manuscript.