with folate-chitosan. The obtained magnetic carriers characterized by various techniques such as X-ray diffraction, field emission-scanning electron microscopy, transmission electron microscopy, vibrating sample…
porosity. The time factor and the effect of the grinding period were studied. X-ray diffraction (XRD), X-ray fluorescence (XRF) and size analysis were done for the sample before
close-packed planes of the ordered lattice. In the present contribution, X-ray diffraction and Transmission Electron Microscopy (TEM) studies were carried out on two copper based CuZnAl and CuAlMn ... X-ray diffraction…
were synthesized by sol-gel method using blue-green phosphor and characterized using X-ray diffraction (XRD), diffused reflectance UV-Visible spectroscopy, Fourier-transform infrared and electron microscopy techniques
nanocapsules characteristics were studied using techniques such as Fourier Transform Infrared Spectroscopy (FTIR), X Ray Diffraction (XRD) was used to characterize the composition of the multilayers of the Nano capsules
varying In/Se vapor pressure ratios. The crystal structure were defined by X-ray diffraction and Raman spectroscopy. The pure ?-In2Se3 with In/Se ratio of 0.67 was achieved
Photoelectron Spectroscopy or Raman Spectroscopy has been used for crystallinity analysis wide angle X-ray diffraction has been used and for other solution measurements UV-Vis spectrophotometer has been used
Raman spectroscopy. The microstructure of the 3D printed scaffolds is further characterized by X-ray diffraction before and after sintering. Special highlight of the study is first testing with additional
five is monophase alloy, consisting of sole Ti5Si3. Microstructure was examined by synchrotron X-rays diffraction and high resolution transmission electron microscopy. This alloy is almost 300% harder compared with
followed by calcination in ambient conditions at 550C. Characterization of structural properties with X-ray diffraction (XRD) technique revealed that synthesized sample has rutile crystal structure with crystallite size
C3N4 (Ng-C3N4). However, it decreased the crystallinity by broadening the dominant X-ray diffraction (XRD) peak and increased the surface area and mesoporous nature because of the formation ... C3N4. The increase of…
were confirmed by use of UVvis spectroscopy. Sizes of NPs were determined by X-ray diffraction (XRD) and transmission electron microscopy (TEM) while bioreductants were examined using Fourier transform infrared
C3N4 photocatalyst was comprehensively characterized by Fourier transform infra-red (FT-IR), X-ray diffraction (XRD), high-resolution transmission microscopy (HR-TEM), energy dispersive X-ray spectroscopy (EDS) and X
morphology of the samples and the size of particles were examined by X-ray diffraction (X???pert Pro MPD) and scanning electron microscopy (JSM-6510). Magnetic properties were measured using
reaction method. The structure and microstructure of the sintered pellets were investigated by X-ray diffraction (XRD) and scanning electron microscopy (SEM). The XRD analysis confirmed the formation
muffle furnace at 550 for 2 hours. All the nanocomposites were characterized by X-ray powder diffraction, UV???vis diffuse reflectance spectroscopy, photoluminescence, X-ray photoelectron spectroscopy, Raman…
nanocomposite films was carried out by infrared spectroscopy with Fourier Transform, X-ray diffraction, thermogravimetric analysis, and scanning electron microscopy; and the preservation capacity of foods coated with
microscopy (TEM), focused ion beam (FIB), X-ray diffraction (XRD) and selected area electron diffraction (SAED). Energy dispersive spectroscopy (EDS) and X-ray photoelectron spectroscopy (XPS) were also employed
pest control in recent years. Silica nanoparticles were characterized by Scanning Electron Microscope, X-ray Diffraction and Energy Dispersive X-ray Spectroscopy. Characterization studies showed silica nanoparticles of…
using various hardystonite (HT) contents via space holder technique. Transmission electron microscopy (TEM), X-ray diffraction (XRD) and scanning electron microscopy (SEM) techniques was employed to evaluate different…
lesser porous observed on the surface. Phase analysis was carried out using X-ray diffraction (XRD). The results confirmed the tenorite and hematite phase for CuO and Fe2O3 respectively
were observed and analyzed by scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS), X-Ray diffraction (XRD), Raman spectroscopy and diffuse reflectance spectroscopy (DRS) techniques. SEM explains the…
For authors and organisers
Publish, present and keep up with your field
Find the right journal for your paper and submit your manuscript.