exhibited an efficiency of 50.70 % at the same concentration acting as cathodic-type inhibitor. Both inhibitors were found to fit the Langmuir adsorption isotherm with Gibbs free energy of adsorptions
order to clarify the effect of water adsorption on fuel cell cathode catalysis surface, we have investigated electronic structure of Pt and Pt-Co nano-particles with O2 adsorption
SrZrO3 at the interface electrolyte/anode and agglomeration of nickel particles in the cathode. The origin of these degradation phenomena is discussed in terms of the mass transport processes
problem of increase cost in the additional manufacturing process. Herein, we developed a facile cathode fabrication technique by introducing well-known alumina (Al2O3) ceramic filler during a cathode electrode…
understand the cell mechanisms of PFC. The Fermi level between the photoanode and the cathode forms interior bias that inhibits recombination of photogenerated electrons and holes, resulting in increase
because the semiconductor-ionic materials can integrate fuel cell all anode, electrolyte and cathode functions into one component/layer thus to realize the fuel cell. We are working on both
critical drawbacks in RTIL based Li-air battery. We also studied the effect of cathode thickness on the performance of Li-air battery at different operating temperature. The transport limitation ... lithium ions can be…
were also evaluated. PDP measurements showed that the presence of DMTD significantly decreases anodic, cathodic, and corrosion currents in the studied solution with more pronounced effect on anodic domain
alloy was used as anode immersed in wastewater at room temperature with platinised titanium cathode. Five operational parameters ( initial dye concentration, pH, COD, applied voltage/current and the contact time
mechanical properties of steel. However, as the electrically contact of Fe3C as a cathode site and ferrite site as anode in electrolyte can cause the galvanic corrosion, the corrosion resistance
battery systems. We highlight that such materials can outperform CuF2 as a high voltage cathode in agreement with by DFT based calculations. Latest developments on the identification of suitable anode
performance of AWE is largely classified and influenced by four factors of anode, cathode, separator and cell structure of electrolyzer. Here, the results of electrodes and separators are mainly explained ... Separator…
reduction of the mediator occurred as evidence by the concurrent maximal anodic and cathodic current recorded at the two WEs. The electrical current difference plot against the potential scale enabled
cells and metal-air batteries, the electrochemical Oxygen Reduction Reaction (ORR) occurring at the cathode is one of the key limits for their further development and requires electrocatalysts to increase
type host framework and cubic nanopores, 0.5 nm at the edge. PBAs are promising cathode materials for lithium ion (LIBs) and sodium ion (SIBs) secondary batteries,[1-3] reflecting their
transport of drug and enhancement was 2.26, 1.61, and 1.37 folds respectively in cathode chamber compared to the without sodium lauryl sulphate. The maximum cumulative extraction was obtained with ... sodium lauryl…
injected at the anode and transported by EK to the target producer (cathode). Moreover, the capillary number change, and Single Energy CT Scan (SECTS) results were analyzed in order
method. The construction of membrane less single-chamber soil MFCs by setting up the cathode and the anode activated carbon, inoculating the sludge and adding the co-substrates can promote
stimulus parameter with two phases of symmetric thorn pulse, 160 Hz for 20 minutes, cathode on the left acupoint and anode on the right acupoint. Data analysis was done with
coolant in the electrochemical cell with the strongly polarized anode and the quasi-equilibrium cathode, occupying εH2O by electrons, and forming hydroxonium radicals, H3O, as the strongest reducers. Opposite ... with…
silicon, glass and OLC 45 special substrate. TVA method consists from an externally heated cathode surrounded by a Wehnelt cylinder that concentrates high voltage accelerated electrons on the anode material
This design, however, results in water accumulation in the anode and nitrogen crossover from cathode to anode that lead to performance deterioration over time. To ensure good and stable stack ... will discuss the…
processing technology has been developed to fabricate a variety of unique anode1-3 and cathode materials for lithium-ion, Na-ion, K-ion and Li-S batteries. The technique ... hotel rooms are also used to accommodate…
precise control of the air-feed system and the oxygen excess ratio in the cathode side, it must be regulated around the constant value to cope with the oxygen starvation ... feed system consists of a motor air…
vacuum arc titanium plasma are presented. The influence of normal and tangential to cathode surface magnetic field and high-frequency short-pulsed negative bias has been investigated. It was shown ... that the…
For authors and organisers
Publish, present and keep up with your field
Find the right journal for your paper and submit your manuscript.