commercial alloy, and a second one containing less chromium. Elaboration by casting, hardness and compression characterization, and evaluation of the corrosion behaviour in a simple artificial saliva by the means
avoiding the usual spheroidisation and inoculation treatments in the liquid state, were subjected to compression for specifying some of their mechanical properties. The globally spheroidal shape of graphite allowed…
irons, the microstructure characterization of which were previously carried out, were here subjected to compression test, with comparison with the corresponding control sample containing only iron. The results show that…
this series.Microstructures (graphite, matrix) and mechanical properties (hardness, yield strength and hardening in compression) are gathered to be analysed versus the nature of theMelement at constant M content and…
crowns were cemented to dies using a resin cement. The specimens were tested under compressive load at a crosshead speed of 1 mm/min using a universal testing machine until
with QTH and LED light curing units for 40 seconds. The comparative evaluation of compressive strength, surface hardness and depth of cure were done with Instron machine, Vickers hardness testing
modified guidelines. Concrete cubes and cylindrical specimens were tested for evolving the compressive strength and split tensile strength by varying the percentage of M-sand in Geopolymer concrete. The percentage
becomes important with focus on its performance. In view of this, RPC with a compressive strength of 120MPa was produced using local available materials. Laboratory investigations like; Compressive test, split
linear with negligible slip. Also very less Von Misses stresses was seen in the compression zone of the beam which gave good bonding of the shear connectors in the tension
seen that cactus extract improves the plasticity of the mortar, workability and compressive strength of the concrete. Setting time of cement has been delayed due to moisture holding capacity ... protein and…
proportion methods. The experiment are conducted in two phases to observe the properties i.e. compressive strength and water absorption of fly ash cement brick. In both phase the cement ... concrete research laboratory…
Admixtures are added to Portland cement concrete to improve its properties, in particular its compressive strength, bond strength, and abrasion resistance. GGBS 50% and Silica fume or Alccofine ... added additive to…
sand by using ceramic waste. In order to analyze the mechanical properties such as compressive, split tensile, flexural strength, the samples were casted with 10%, 20%, 30%, 40%, 50% replacement
sand with burnt coconut shell powder) for M30 and M40 grade. The compressive strength of M30 and M40 concrete cubes containing 10%, 20% and 30% burnt coconut shell powder
silica fume using super plasticizer is investigated. Properties of hardened concrete like ultimate compressive strength and split tensile strength have been determined for different mix combinations of materials and…
with partial replacement of waste tyre rubber chips at various percentages had been investigated. Compression and split tensile tests were carried out for three different percentages of rubber chips
generally obtained through an experimental testing of prototype. The availability of performance parameters for compressible flow is limited, and experimental testing can be cost prohibitive. In this case the…
reinforcement material in composites materials. In laminated composite tensile strength, flexural strength, compression strength of woven natural silk fabric reinforced epoxy (WNS/Epoxy) were investigated. Composite…
high performance concrete (HPC) are cementious composites with enhanced material properties like high compressive strength, high durability, high fatigue resistance etc. The HPC mix composites are characterized by high…
weight percents) as studied in their as-cast states in the first part, were compressed until reaching significant amount of plastic deformation. The resulting hardened steels were mounted as electrodes
percentage, percentage of chalky area and kett (using a colorimeter). Texture was evaluated on compression by texture profile analysis with a texturometer. The samples studied showed biometric characteristics
Despite the importance of this understanding, especially in the design and manufacture of direct compression formulations, there are no set analytical testing standards or materials classification guidelines. Instead…
plastic powder as partial replacement. Specific weight, thermal conductivity, water absorption capacity, porosity and compression strength of bricks are tested. The overall results show the usability and feasibility…
For authors and organisers
Publish, present and keep up with your field
Find the right journal for your paper and submit your manuscript.