SEPIC converter. The bidirectional inverter is required for the purpose of power flow control between dc bus and ac grid. The simulation results for the input/output voltages and comparison
converter functions as an active clamp circuit, which alleviates large voltage spikes across the power switches. Thus, the low-voltage-rated MOSFETs can be adopted for reductions of conduction losses ... energy stored…
Power quality in distribution system by injecting voltage in series for the protection of sensitive loads against voltage sags and voltage swells. The performance of the DVR depends on control ... this paper fuzzy logic…
inductor dual-output (SIDO) buck converter has recently found applications in hand-held battery-powered electronic devices. The circuit operation and the functional interdependencies among basic converter parameters…
This paper presents a fast maximum power point tracking (MPPT) control algorithm for the photovoltaic (PV) in a hybrid wind–PV system, in which the PV generator may also need ... variable-step size incremental…
dump-load resistance with IGBT chopper control and the dc link voltage is present to consume the maximum output power from the generator. Dynamic and steady-state performance where simulated
Power electronics plays an important role in controlling the drives. Digital control technology has been rapidly developed for power electronics and electrical drives, and it has been the impetus ... industrial…
recent year various control strategies have been applied to power converters. DC-DC converter such as Buck type, Boost type, Buck-Boost type have been widely used in traditional industrial ... easily supply to the duty…
mitigate these power quality problems have gained more attention in the recent decades. Unified Power Quality Conditioner (UPQC) is one of the CP devices whichmitigates both load current and supply ... development of…
capacitors. The conventional configuration of DFCM converter is modified by additionally adding four low power switches and one minor dc voltage source. Added minor voltage source having a small fraction ... link…
Single Phase Single Stage Power Factor Corrected (SSPFC) AC/DC converter that operates with a single controller to obtain regulated dc output voltage is presented in this paper. The proposed ... converter integrates the…
important power quality problem. The selection of a SMES unit in this project is based on its advantages over other energy storage technologies. Using the Hysteresis current control approach
combination with a Static Synchronous Compensator under real and reactive power compensation. A Static Synchronous Compensator control structure with the capability to coordinate the control between the positive…
subject of intensive research and it is widely employed to control the output voltage of static power converters. Here, Space Vector Pulse Width Modulation (SVPWM) is implemented, which ... controlling technique in…
charged or discharged through input power sources. Multi-Input Converter (MIC) can deliver power from all of the input sources to the load either individually or simultaneously. MICs reduce ... different operation modes…
appliance and traction applications because of its high efficiency, high power density and low maintenance cost. This makes the control of BLDC motor in all the four quadrants very vital ... motor in all four quadrant…
ethanol).The wind power system is well established technologies for renewable energy sources. Each technology has its own individual instrumentation requirements to measure and control system variables. MATLAB software
with GA optimized PID controller for its position control to obtain maximum speed operation is presented in this paper. The power supply to feed the windings of the motor
systems becomes a challenging issue to smartly integrate renewableenergy sources into the grid. Voltage control is one of these ancillary services which can ride through and support the voltage under ... strategies, a…
higher reliability. In order to obtain the maximum power point tracking, the duty cycle of DC-DC boost converter switch controlled by the measurement of DC current and DC voltage
wire system for reactive power compensation. The proposed system not only, can control the active power flow but also mitigate the load unbalance and harmonics, and manage reactive power ... functions may be…
Voltage is an important parameter for the control of electrical power systems. The Distribution Network Operators (DNO) have the responsibility to regulate the voltage supplied to consumer within statutory limits…
algorithm,” as a new method, is developed for the control of the inverter so as to extract the maximum power form each PV source under partial shading and to deliver ... MATLAB–Simulink real-time data exchange is…
becomes popular because of its high power, high voltage application. However it has some disadvantages such as increased number of components, complex control method and voltage balancing problems. In this
For authors and organisers
Publish, present and keep up with your field
Find the right journal for your paper and submit your manuscript.