geostorage technology that the long-term fate of injected CO2 into the subsurface is understood. Dissolution trapping is known as a long-term process that able to reduce the leakage
respectively. This high concentration may be accounted for owing to the presence of subsurface microbial-algae-activity. There is a low concentration 14.1% to 19.8% of silicon within the region
achieved by field plowing and mulching (4.83-5.33 t/ha), when the usage of subsurface plow with the increase of nitrogen (N30-60P30K30) also contribute to high yields
magnetic contour maps prepared respectively. 2-D gravity and magnetic models of the subsurface structure were generated by forward modelling. A body of density of 3.20gcm-3 and susceptibility
landfills, ranging from less than 100mS/m to 1500mS/m, thus, the subsurface of the landfills revealed varying extent of waste decomposition. The high conductivity response of 900mS
groundwater development for the region. Schlumberger array and electrical sounding technique are adopted for subsurface delineation. Eleven resistivity profile graphs generated from tabled data are presented by…
with reduction of insoluble extracellular electron acceptors like metals and minerals in oxygen-limiting subsurface environments. Geobacter sulfurreducens belongs to deltaproteobacteria which has diverse roles in…
possible space observation not only of visible surfaces, but also subsurfaces. The satellite holds six sets of scientific equipment created by scientists, students and post-graduate students of the Samara
rinse technique. In this technique, the smear layer is removed completely and the subsurface is demineralized via etching with acids. The second method uses the smear layer as bonding substrate
Craton (EDC), South India. The effectiveness of these methods is in mapping variations of subsurface geological structures, faults/fractures disposition, extent of the dykes and contact between different rock types
observational points. The study objective at using Regional gravity survey is to reveal the subsurface structural geology of Awataib valley and adjacent areas. Land Sat image aided by collected field
generate geo-electric sections from which the aquifer was delineated. The aquifer revealed four subsurface layers which comprises of sandy topsoil, clayey sand which acts as aquitard and sandy gravel
shown to depend on permeability and coarseness of the respective soil surface and subsurface horizons; a phenomenon critical for harnessing rain and flood water to recharge groundwater
hydrostatic pressure of Fabi Field onshore Niger delta was carried out to understand the subsurface depth pressure variations in the field. The well logs were analyzed to identify hydrostatic pressure
with calcite (CaO3) contents of about 30 to 42%. In order to determine the subsurface distribution of these sequences, a geophysical prospection campaign was carried out in which a total
were used for the radar data in providing framework in order to link subsurface properties and GPR data. The result of the three layers model shows that response profile obtained
area on Exploration Licenses (ELs) No. 17373 and part of No. 17374. Prior to subsurface core drilling investigation, surface reconnaissance survey was undertaken. Rockworks 16 software complimented with dilute…
Reconnaissance mapping and core drilling for subsurface limestone deposit investigation in Mbiabong Ukwa area and environs was carried out using a hybrid but simple rotary core recovery
Chongopyeng 1 (8 m). Suspected igneous intrusions and fractures were observed within the subsurface of Kwang Rayfield 1 and 2, Doi 1 and 2, Rapkparak Shen and Kwata Zawan
data were interpreted; eight type curves were identified, from the geoelectric section the subsurface was characterized into four lithologies namely topsoil, weathered layer (clay /lateritic clay), weathered / fractured…
various fertilizer sources (i.e. urea, aqua ammonia, ammonium nitrate/sulfate) and applications (i.e. surface subsurface) at 100 to 310 kg N ha-1 rates. Emissions
current study demonstrates that the resistivity imaging method is able to constrain the subsurface geological information for engineers, and to decide if soil improvement is needed for these regions
hydrological cycle. Geophysical surveys were carried out at representative locales to ascertain the subsurface conditions. Digital Elevation Models (DEM) was obtained with the help of Landsat imageries
For authors and organisers
Publish, present and keep up with your field
Find the right journal for your paper and submit your manuscript.