using 1C, 2C, 3C and 4C discharge rates. Variation in temperature of anode and cathode were also measured. The rise in temperature of anode and cathode were correlated in terms
basis, through the UDF (user-defined functions), the faults of gas starvations in anode, cathode and both side, and the dynamic boundary conditions have been added. Additionally, under the different ... Total Harmonic…
magnetron sputtering onto thoroughly cleaned stainless steel and glass substrates with diverging the cathode power from 20 to 40 W. The sputtered films were characterized using X-ray diffraction ... increased from 171…
microbiologically influenced corrosion (MIC) study, the electron acceptor of the cathode plays a decisive influence on corrosion characteristics. Some bacteria which can directly absorb electrons releasing from the…
cathodic electrochemical behavior of the 2-Benzyloxo-1-methylpyridium trifl ate salt ( 1 ) in the presence or absence of methyl iodide, cis -cyclooctene and two monosubstituted malononitrile derivatives was studied…
Platinum (IV) ions reduction process was firstly studied at polarization induced by pulsed cathode current in the presence of titanium ions (ІV). It was demonstrated that at the current density ... solution is elevated…
anode surface and for a coupled reduction of a depolarizator on a cathode surface in order to harness an electrical energy from a given biofuel. The amount of a biocatalyst ... fructose dehydrogenase as an anodic…
phase in the material pasted on a thin foil of Aluminium that formed the cathode while graphite pasted on a thin foil of copper formed the anode of the spent ... lithium ion batteries. In the paste of cathode electrode…
stack. The current distribution becomes more uneven when the distance between the electrode (Anode-Cathode) increases or decreases. however comparing the parts of A and C, show prominent current distribution ... that…
potassium phosphate buffer solution at pH 7.0 and temperature 25°C. The cathodic transfer coefficient was 0.40 and electron transfer rate constant was evaluated to be 1.47 s−1. Moreover ... exhibited a satisfactory…
film (ã- glycidoxypropyl-trimethoxysilane (ã –GPS)) on mild steel substrate which prepared with various cathodic currents, was investigated by electrochemical methods. In comparison with conventional “dip-coated” silane…
electrochemical technique. For electrochemical degradation, the graphite carbon electrodes were used as anode and cathode. Electrochemical behavior of effluent was performed with cyclic voltammetry in different…
electrolytes at a Hanging Mercury Drop Electrode (HMDE) using cyclic voltammetry. The correlation of cathodic peak current and anodic peak current, and the difference in cathodic peak potentials and anodic
electrolytes at a Hanging Mercury Drop Electrode (HMDE) using cyclic voltammetry. The correlation of cathodic peak current and anodic peak current, and the difference in cathodic peak potentials and anodic
diffraction (XRD), scanning electronmicroscopy (SEM), and thermo gravimetric analysis (TGA). The electrical conductivity of cathode materials was increasing slightly with the increasing of dopant ofAl, Co, Ni, Cu andMn…
active dissolution of tin enhances with increasing acid concentration, temperature and scan rate. The cathodic curve exhibits one cathodic peak corresponding to the reduction of passive layer.Addition
cyclic voltammetry and differential pulse voltammetry. Cyclic voltammogramof catechol has one anodic and corresponding cathodic peak which corresponds to the transformation to corresponding o-quinone and vice versa…
scanning electronmicroscopy (SEM). The addition of very low concentrations of BiCl3 decreased the cathodic current only which indicate that BiCl3 behaves as cathodic inhibitor. The decrease in the corrosion rate
polluted salty water. The electrochemical corrosion parameters were obtained at different inhibitor concentrations. Tafel cathodic slopes in inhibited polluted salty water are considerable lower than those in…
corrosion protection coating systems. In standard primers with high zinc content, zinc acts as cathodic sacrifice layer, as zinc is more ignoble metal, therefore protecting the underlaying metal substrate. When…
terminated with ???NH2 (NH2???PEG???NH2) and dissolved in an aqueous solution. When the cathodic potential is applied to Ti in the solution, the terminated PEGs are electrodeposited ... cathode. The PEG-immobilized…
used, where the anode was placed directly in the ash suspension and the cathode in a second compartment, separated from the suspension by a cation exchange membrane. Electrodialytic separation simultaneously ... liquid…
among the most promising candidates as alternatives to high-cost Pt catalysts for the cathode of fuel cells. One of the active sites of the nitrogen-doped carbon materials ... nitrogen-doped carbon materials containing…
Generally, glass cullet is re-used in the container and window glass industry. For cathode ray tube (CRT) glass, the situation is different. This work is devoted to search ... possible applications for waste cathode-ray…
For authors and organisers
Publish, present and keep up with your field
Find the right journal for your paper and submit your manuscript.