nonveneered translucent zirconia and veneered zirconia using a pressed veneer. Materials and methods: Two 3D finite element models were constructed. The models had missing maxillary first bicuspid and prepared abutments
includes a required course in Finite Element Analysis (FEA). Historically, the primary focus of the class has been the underlying theory of the method and its formulation from fundamental governing ... problem with the…
means of translations, symmetries and rotations of basic equilateral triangle. The method of large finite elements used gives satisfactory results. Numerical values obtained are highly accurate for both stress function
calculate the dynamic response of the drill string by adopting the method of three-dimensional dynamic finite element theory improved the Ritz vector method at the same time, present
elasticity in the stress distributed on the implant system and bone. Finite-element stress analysis method using ANSYS program were used for evaluation. XiVE of 13 mm length
very important. In this study, a multi-scale hierarchical molecular mechanic (MM)–finite element (FE) coupling methods are proposed to illustrate the influence of strain on mechanical properties of double
implant under axial and oblique loads by using three-dimensional (3-D) finite element analysis (FEA) method in case of surgical procedures couldn’t be applied especially to the geriatric
joint recovery by research mechanical behavior of knee joint under physiology load. Methods: A 3D finite element model was established considering total knee joint with meniscus, cartilage and ligament
carriers. So the numerical method of analysis is adopted, in which ‘Finite Element Technique’ is most widely used method. Based on FE simulation, modifications and optimization has been done
work condition of the working device by using the mechanical theory and method. The static strength finite element analysis of excavator boom was carried through by using ANSYS, from which
techniques such as Extended Kalman Filtering (EKF). This method of evaluation of the strain components was validated against a finite element analysis SolidWorks
dimensions among the tested range of implant designs under study using 3D Finite Element Study. Materials and Methods: A modified Reverse Buttress dental implant in two models (TiG4 and TiG5 ... analysed for stress…
variants of these methods are discussed. The efficiencies of all these methods are compared by using a finite element analysis of intact and damaged beams and plates. The methods
Smooth Particle Hydrodynamics coupled with Lagrangian Finite Elements (SPH-FE) are chosen for the discretization of the simulation problem. In the SPH-FE method, SPH formulation, a mesh less method ... reduced the total…
Abstract Study Design: Biomechanical study using a finite element model of the lumbar functional spinal unit (FSU). Objectives: To compare the biomechanics of a novel in situ expandable posterior lumbar ... with a…
dynamic vibrational compaction loads on the stability of underlying concrete pipes using finite element modeling (FEM) analysis method is investigated. The FEM is conducted on different reinforced concrete pipe
short dental implants, in the posterior region of the mandible, by using finite element analysis. Materials and Methods: By using Rhinoceros software V15, we created four different Three-dimensional models
rearranged the biophysical approach in the design of implant used in medicine. Method: Analysis of several finite element analyses in the field of biomechanics of stress/ distribution in implants compare
cadaver of pectus excavatum with scoliosis. Therefore, the calculation method and the result of the finite element model in the numerical simulation still lack of the experimental verification. Methods: According
which the system yields a rapidly growing temperature field, the perturbation method in conjunction with the finite element scheme has been employed to solve an eigenvalue equation, from which ... operating speed is…
Finite element model based on the Euler-Bernoulli theory was developed and used to investigate the dynamic behaviour of a C-shape piezoelectric actuator subjected to sinusoidal voltage. The main ... forced undamped…
traditional design way, an intelligent design and optimization methods were proposed. This method took secondary development of ANSYS based on the Visual C++2010, and achieved the input of design ... cutting head can be…
have driven significant advancements in the structural analysis of airfoil components. Airfoils, being critical elements of aircraft and turbine designs, experience complex stress distributions under varying operational…
reduction. Modeling is done with drafting software AutoCAD. Finite element based software ANSYS is used for this work. Initially using AGMA method bending stresses were determined analytically. A good agreement
different types of transpedicular fixation under asymmetric loads (lateroflexion). Materials and methods: We used a mathematical finite element model to study the result of decompression-stabilizing surgery of the…
For authors and organisers
Publish, present and keep up with your field
Find the right journal for your paper and submit your manuscript.