prepared and its strength was evaluated using standard Indian Specifications. A significant increase of compressive strength, split-tensile strength and flexural strength was observed for respective B1 (100ml ... 150ml)…
methyl-2-propanol in carbontetrachloride at 303 K. The acoustical parameters such as adiabatic compressibility, free length, molar volume and internal pressure have been obtained from the experimental data ... with a…
performance of STA-Liatest D-dimer assay and validate the age-adjusted cut-off value in Chinese outpatients with suspected VTE in a prospective non-interventional study. Methods: Symptomatic patients ... Liatest D-dimer…
force value=100 kdyn), (2) severe injury group (laminectomy and spinal cord impacting, force value=200 kdyn), (3) control group (laminectomy only). In order to prove the creation of spinal ... spinal cord injury were…
better release of drug i.e., 98.87% in 30 min, all the pre and post compression parameters were in limits. The optimized formulation has shown 98.27% drug release ... formulation was taken for in-vivo study which gave…
granules were evaluated for angle of repose, loose bulk density, tapped bulk density and compressibility index. The tablets were subjected to various tests for physical parameters such as thickness, hardness ... vitro…
decide to apply a do-not-resuscitate (DNR) order, meaning that neither basic (heart compressions and ventilation) nor advanced (defibrillator or medicines) CPR should be performed. Previous research has found…
statistical theory of forming cosmogonical bodies. We find that temporal deviation of the gravitational compression function of a spherically symmetric spheroidal body (under the condition of mechanical…
tablets formulated with both starches as disintegrants were affected by their concentration and the Compression Force (CF) and P. edulis starch exhibited a favorably comparable disintegrant property with Irish potato…
test incidence of venous thromboembolism (VTE) of less than 0.1% with a negative predictive value for exclusion of DVT of 99.99% during 3 months follow-up. Modification of the Wells ... score assessment for DVT…
bulk density, 0.608±0.179 gm/cc tapped density and good flow properties. Post compression parameters were 15.0±0.009 kp hardness, 7.23±0.005 mm thickness, and 95.29±0.021% drug content. Swelling ... vitro drug release…
cooling time to provide proper time interruption that results in the formation of high compressive residual stresses and super strengthening of the material are some of the main ideas. Exact ... writers is used to…
carrier was proved by Fourier Transform Infrared Spectroscopy (FTIS) and the optimized formula was compressed into tablets. Results revealed that all prepared solid dispersions showed an increase in solubility over…
ultrasound breast image features such as local orientation and phase using pre and post compression image, image features are used to estimate analytically the displacement fields. By Adapting this model ... that it has…
solute and solvent. In these studies acoustical parameters such as intermolecular free length, isentropic compressibility, specific acoustic impedance, relative association and ultrasonic velocity number were used to…
results present excellent values of pH, moisture content, ash content, loss on ignition, iodine value and bulk density. The mechanical properties of the luffa aegytiaca filler (LAF) filled vulcanizates present…
concrete research laboratory of the institute. The test results showed that, the maximum optimized compressive strength is obtained for optimal mix proportion percentage of class F fly ash 40%, cement ... metakaolin…
From this experimental data, deviation in ultrasonic velocity, Δu, deviation in isentropic compressibility, Δks, excess intermolecular free length, E f L , excess acoustic impedance, ZE and excess molar volume…
approach. It is observed that density and specific gravity increases and ultrasonic speed, isentropic compressibility and intermolecular free length decreases with the mole fraction of 1,2-dichloroethane ... present…
Society for Testing and Materials (ASTM) Standard for sulphur content, viscosity, cetane number, acid value, colour and specific gravity. In addition, features such as environmental acceptability, domestic availability…
from waste packaging bags. The sustainable composite materials were fabricated using these materials by compression molding and their mechanical properties (tensile, flexural, and impact) were investigated. The…
Statement of the Problem: Seed hulls are fiber rich and typically contribute little nutrient value. Dehulling seed is often practiced to enrich protein and decrease fibre content. The dehulled product ... speeds and…
into the pedicles of normal vertebra above and below the fractured vertebra.[1] By compression and distraction manoeuvres, also by gentle manipulative manoeuvres we reduced the retropulsed, translated vertebrae…
For authors and organisers
Publish, present and keep up with your field
Find the right journal for your paper and submit your manuscript.