mobile phase B as an Acetonitrile at 1.0mL/min flow rate, using Inertsil ODS 3V column, 40°C column temperature and PDA detector with wavelength 230nm. The analytical method
column. The mobile phase (Water and methanol 60:40%v/v) was pumped at 0.8ml/min and effluent wasdetected at 230nm using a PDA detector. The retention time
with a mobile phase consisting of 0.1% ortho phosphoric acid and acetonitrile in the ratio 55:45 (%v/v). The detection was monitored using PDA detector at 269nm with
column. Mobile phase used consists of phosphate buffer pH 3 and acetonitrile (55:45 %v/v). The elute was monitored with the UV–VIS detector at 280 nm with
adjust the mobile phase pH to 3.8. It was filtered through 0.45 μ membrane filter and detection was carried out at 233 nm using PDA detector. Validation was performed
column using mobile phase [Acetonitrile: Buffer-1 (85:15%, v/v)] and 50% Acetonitrile in water as diluent. Ziprasidone was chromatographed and analyzed by MS Detector. This method shows good
mobile phase, adjusted at pH 4.0 using 0.02 M orthophosphoric acid and pumped at a flow rate of 1 mL/min. using UV detector at 235 nm. The internal standard
mobile phase, with a flow rate was set to 0.9 mL /min and injection volume of 20 µL, analysis was screened with UV detector at 280 nm. The retention time
using the mobile phase acetate buffer and acetonitrile taken in 55:45% v/v and the response was detected at 221 nm by using PDA detector. Flow rate was maintained
5μm column. Mobile phase comprising of water: acetonitrile (75:25 v/v) was used to achieve good resolution of the analyte and its impurities. The detector linearity was established
mobile phase consisting of acetonitrile-phosphate buffer pH 3.5 (15:85, v/v) at a flow rate 0.9 mL/min. The ultraviolet detector was set at wavelength 280 nm. Chlorphineramine
column. The mobile phase (gradient elution mode) consists of methanol, acetonitrile and water (pH = 3.0, with acetic acid); the eluents were monitored by photodiode array detector, with the wavelength
column. The mobile phase (gradient elution mode) consists of methanol, acetonitrile and water (pH = 3.0, with acetic acid); the eluents were monitored by photodiode array detector, with the wavelength
gradient mobile phase on an Acquity ? UPLC BEH C18 column. A TQD Waters tandem mass spectrometer equipped with IonSpray ionization source was used as detector and was operated
liquid chromatography (LCxLC) system linked to a 96-384 wells fraction collector, a UV detector and a high resolution time-of-flight mass spectrometer (HRToF-MS) to identify emerging toxicants ... while the selectivity…
Mixed transition-metal oxides (MTMO) including stannate phases have promising material properties and are known for the ability to tailor particular features for different uses. They are currently being explored…
shown tremendous promise, they are only just now beginning to go beyond the research phase into commercialization. Around 2015, image processing methods using deep neural networks began to replace ... team, a StalkNet…
simple, sensitive, reliable and rapid reversed-phase high-performance liquid chromatographic (RP-HPLC) method has been developed and validated for the determination of pitavastatin calcium using paracetamol as internal…
mobile phase on an Endoversil, C18, ODS (2.1 50 mm 1.7 m) analytical column. The eluents were identified at 260.0 nm using a PDA detector. Doravirine, Lamivudine, and Tenofovir
methanol as mobile phase B. The flow rate is 1.0 mL/min with gradient elution mode and the wave length for detection is 240 nm (UV detector). The developed method
mobile phase at a flow rate of 1.0 mL min1, an injection volume of 20 μL and were detected at 254 nm using UV detector. A simple, selective and sensitive
For authors and organisers
Publish, present and keep up with your field
Find the right journal for your paper and submit your manuscript.