transmission electron microscope (TEM). However, the sophisticated operation of TEM, high cost and low throughput limit its extensive applications. In this work, we start with electron beam lithography combined…
ants, Crematogaster rogenhoferi and Polyrhachis dives. The nest surfaces were observed with a scanning electron microscope (SEM). During this study we found that Carbon content was 46.96% and Oxygen
synthesized Nd-Fe-B material was 1300nm analyzed by field emission scanning electron microscope (FE-SEM) and X-ray diffraction (XRD). The magnetic property as a function
laser pulses with 8MHz repetition rate). Scanning electron microscope (SEM) images of intact (top left) and irradiated nanostructures with ~13000 laser pulses with linear polarization. The energy of laser
synthesized Nd-Fe-B material was 1300nm analyzed by fi eld emission scanning electron microscope (FE-SEM) and X-ray diff raction (XRD). Th e magnetic property
materials. The detailed microstructural characterization using scanning electron microscopy (SEM), energy dispersive spectrometry (EDS), electron backscattered diffraction (EBSD) and transmission electron microscopic…
nanoparticles was done by Fourier-transform infrared spectroscopy, X-ray powder diffraction and scanning electron microscope confirmed the particle and its particle size was 200-220 nm by Zetasizer
BCL2, MCL1, P53, and GAPDH on immature oocytes. For morphological evaluation using Zoom stereo-microscope, 853 oocytes were divided into 3 groups for vitrification using 40% Glycerol ... Glycerol (84.2±2.3%) compared to…
calcium titanate sample was characterized by X-ray Diffractometer, Vibrating sample magnetometer, Scanning electron microscope, Fourier transform infrared spectrometer, Raman spectra. The samples prepared by this…
Cu12Sb4S13 tetrahedrite samples. Structural characterization was done by X-ray diffraction method (XRD). Scanning electron microscope (SEM) and an in-situ electron dispersive spectroscopy (EDS) were used for particle
structure, diversity indices were calculated. The abundance and level of colonization by SEM (Scanning Electron Microscope) analysis also demonstrated that the endophytes were more abundant in roots as compared
exposure to sulfuric acid (H2SO4) contaminated water solution, i.e. pH 4. Scanning electron microscope (SEM) results confirmed the uniform and globular morphology of the passive film
characterized using Particle Size Analysis (139.2 nm), Fourier Transform Infrared (FTIR) Spectroscopy and Scanning Electron Microscope. These results confirm the formation of CuNPs. Since fungal infection is a common
With the help of thermal gravimetric analysis (TGA), X-ray diffraction (XRD) and scanning electron microscope (SEM), the powder characterization has been compared. The results show that
gold electrode (SPEAu) was characterized for the first time, using atomic force microscopic (AFM) and scanning electron microscopy (SEM). The specificity of the immune-sensor was then investigated under
nanowalls was evaluated from the top view observation of grown CNWs observed by scanning electron microscope. From results, it is found that the behavior of average area change
vertical field effect transistors (FETs) are promising devices for future super high power FET electronics beyond Si, SiC and GaN devices. To realize n-AlGaN vertical FETs with carrier blocking ... irradiation source…
formed in the area where the Al dots are formed (e). A scanning electron microscope (SEM) image of via-holes is shown underneath of (e). Conductive n-AlGaN
gold electrode (SPEAu) was characterized for the first time, using atomic force microscopic (AFM) and scanning electron microscopy (SEM). The specificity of the immune-sensor was then investigated under
gold electrode (SPEAu) was characterized for the first time, using atomic force microscopic (AFM) and scanning electron microscopy (SEM). The specificity of the immune-sensor was then investigated under
printer (MakerBot® Replicator_ 2X Experimental 3D Printer). In the present study, scanning electron microscope (SEM) images of the filaments and the 3DP tablets were taken, the physico-pharmaceutical properties
days, 14 days and 28 days and the accumulative effect were calculated. Scanning electron microscope (SEM) was used to assess the surface changes and microtopography after polishing
connecting multiple chambers containing MFCs. Microbial diversity on anodic biofilm was observed by scanning electron microscope (SEM) image analysis. Morphological, biochemical and molecular characterization of the…
solution. The biosynthesized AgNPs were characterized by FTIR, X-ray Difraction (XRD) and Scanning Electron Microscope (SEM). Antimicrobial activities of the AgNPs were investigated against ten human pathogens using
For authors and organisers
Publish, present and keep up with your field
Find the right journal for your paper and submit your manuscript.