that the corrosion was a charge transfer controlled process. Moreover, the absorption of Q2 was found to obey the Langmuir adsorption isotherm. Density functional theory (DFT) was employed for theoretical
sole rate limiting step. Thermodynamic parameters of adsorption were also determined. The mechanism of adsorption process was also elucidated by FT-IR, AFM and EDX. Furthermore, regeneration studies showed that
conditions have been optimized for the maximum removal of the dye. The adsorption process is found to be maximum at low pH values: 2- 4. The co-ions generally found ... natural waters have not interfered. The adsorption…
Optimum conditions for the maximum extraction of Al (III) ions have been investigated. The adsorption process is analyzed with Freundlich, Langmuir, Temkin and Dubinin-Radushkevich (D-R) isotherm models ... found that…
first order kinetic model suggested physisorption as the underlying phenomena. Thermodynamic studies showed that adsorption process was endothermic and spontaneous in nature. The mechanism of adsorption by TETA
dispersed solvent extraction, ionic liquids, membrane filtration, liquid membrane, adsorption, and reverse micelle extraction. The improvements of downstream processing for antibiotics are necessary not only to enhance…
solution and contact time for the adsorption of Nickel (II) ion onto CMAC are studied in a batch process mode. Result shows that pH 6 is the most suitable, while
Adsorption using natural materials is now becoming one of the common methods used to remove heavy metals from effluents. The process is simple and it depends on the nature
solution. FT-IR characterization of Jaswand Leaf Powder (JLP) done by standard procedures. The adsorption process was carried by batch experiments by varying adsorbent dose, pH of the adsorbate (metal ... findings was…
removal of hexavalent chromium from aqueous solution. The optimum time required for the adsorption process has been evaluated. The kinetic of the process has been calculated using Lagergren’s first ... efficient…
pseudo first and second order mechanism, were applied to predict the rate constants. The adsorption process follows the pseudo-second order kinetic, having a correlation coefficient in the range between ... with…
data were found to be well described by Freundlich model. The kinetics of the adsorption process of fluoride on chitin/cellulose composite were also investigated using the Pseudo first order
found that the equilibrium of the process was reached after 60 min. The optimum pH value was found to be 6. The adsorption capacity of the adsorbent were found ... show that the degree of freedom increase at the…
metallargical industries, various manufacturing process of metals & non-metals, organic matter, and physical factors like , pH, electrical conductivity, and also it is depend upon adsorption, desorption phenomenon of…
various conditions such as, pH, contact time, adsorbent dosage, and concentration of adsorbate. The adsorption process was checked for conformity with the Freundlich and Langmuir isotherms. From the adsorption…
removal of chromium (VI) from aqueous solution. Batch adsorption experiments were performed in order to examine the removal process under various factors like the effects of initial concentration, adsorbent dose…
adsorption capacity according to Langmuir isotherm was found to be 19.92 mg/g. The adsorption process was observed to follow a pseudo-second-order kinetic model. Thermodynamic parameters were also
initial metal ion concentration, biosorbent dose, shaking time, pH and temperature dependent. The maximum adsorption capacities for Cr(VI) and Co(II) ions are 109.9mgCr/g and 16.69mgCo ... model and isotherms were used…
data were well described by the pseudo- second order kinetic model. The mechanism of adsorption process was determined from the intraparticle diffusion model. The results indicate that coir dust could
adsorption was obtained for the smallest size of the sorbent particles. The thermodynamic parameters of the ferrous ions uptake on to the solid sorbents show that, the process was endothermic
temperature had significant effects on ibuprofen adsorption. With help of numerical optimization technique the adsorption process was optimized and a good desirability value (1.0) was also obtained. The experimental
basics of photocatalysis on semiconductors, mainly on TiO2 and the application of photocatalytic processes for water purification from organic and inorganic matter as well as metal removal introduced in order ... pseudo…
blend. Effect of various process parameters, viz., initial metal ion concentration, pH, and adsorbent dose has been studied for the removal of Cadmium. The adsorption data have been explained
temperature. The increase in IE% with rise in temperature is suggestive of chemical adsorption process. The unchanged value of activated energy, Ea, with change in concentration and increase in Gibb ... evaluated heat…
For authors and organisers
Publish, present and keep up with your field
Find the right journal for your paper and submit your manuscript.