parameters of formulation based on Caquot formula in order to optimize the couple compressive strength/absorption of water under various degrees of hygrometry and on the other hand, more precisely
behaviour of the frame was influenced by the brace thickness, compressive strength of the concrete fill of the BRBs under blast loading. Investigations were also carried out to understand
samples. The geopolymer based pastes, mortars and composites presented high mechanical performance with uniaxial compressive strength from 36 to 50 MPa and flexural tensile strengths ranging from
calculated and then mechanical evaluations were done by using Vickers hardness test and compressive strength test. Results: The scanning electron microscope examination shows a fusion of powder particles with
minimal friction of steel fiber in the concrete. One group was used for the compression strength test. The other group was used for drying shrinkage tests in a curing chamber
site by trucks and assembled on site. UHPFRC is characterized by high and compressive strength combined with an extreme high fracture energy makes it possible to make wind turbine towers
bulk density was slightly changed for 50% carbon black and Phenol formaldehyde composites. Compressive strength of sample was increased with increasing the pressure, heating temperature and time
animal models. Simvastatin is shown to increase bone volume, bone formation rate, and bone compressive strength. The use of statins for bone regeneration is a promising and growing area
multi-phase composite material and used widely in construction industry because of high compressive strength and low cost. Its limited tensile strength makes it prone to cracking. Important parameters like
sodium stearate solution in the gel form that showed the lowest absorption percentage. The compression strength tests for all samples did not show any effect neither positively or negatively. Recent
polyurethane/magnetite/ hydroxyapatite nanocomposites were dispersed homogeneously in the polymer matrix. Investigations of compressive strength confirmed that the obtained nanocomposites exhibited acceptable mechanical…
which is beneficial for the colonization of bone cells. The compressive strength was lower than 1 MPa for every scaffold, what makes them inappropriate for load bearing applications. In vitro
heating temperature, 60 mm die thickness. The density of obtained pellets, pressure of compaction, compressive strength analysis and the net and gross calorific value of the material with the addition
days of hydration the cement based materials with 0.7% nano-SiO2 content improved the compressive strengths compared with those of the etalon (E=45MPa Vs. AM1=55MPa). The microstructure
supplements were found. Two formulations were developed and researched. It was revealed that the compressive strength of compositions of pyrotechnic products is provided by cementators (coal arenas
scaffolds. Bio-ceramic nano-hydroxyapatite increase in scaffolding zein/chitosan (zein/cs) increases the compressive strength of the scaffold, but decreases the amount of water absorption and porosity and speed
testing. The best composition has been studied, resulting âÂ?Â?Sampel_18âÂ? with mortar compressive strength of 14 days is 12.85 MPa. In comparison with the national standard
grinding waste pottery powder as an admixture for cement mortar was efficient in increasing compressive strength, workability and in reducing alkali silica reaction expansion due to the increased amount
physical, chemical and mechanical properties after a curing period, such as high bending and compression strength, high surface hardness, low adsorption of water and low permeability, negligible contraction and thermal
CLSM). The area of bonding resin was measured using ImageJ software. The mean maximum compressive strength in the RE group was significantly higher than that in the NRE group
provides efficient structural performance in resisting axial compression. The concrete core adds stiffness and compressive strength to the tubular column. The steel tube acts as longitudinal and lateral reinforcement