high performance liquid chromatographic (HPLC) separation on a BDS Hypersil C 18 column using disodium hydrogen phosphate buffer (0.02 M): Methanol (25: 75, v/v) pH adjusted to 7 with
Methylparaben as an internal standard. Efficient __ chromatographic separation was achieved on Inertsil C 18 column (250mm x 4.6 mm, 5μm) as stationary phase with a mobile phase comprising ... Methanol (35:65,v/v) at a…
tablet formulation. Chromatographic separation of the two drugs was achieved on a Phenomenex column (200mm×4.6 mm, 5μm). The mobile phase consisting of a mixture of 0.1 M phosphate buffer
time for a ternary mixture, uses a Kromasil C18, 250 × 4.6 mm, 5μm analytical column. Analytes were estimated by gradient elution with methanol/water at flow rate ... column temperature is 40°C and detector wavelength…
milnacipran in pharmaceutical formulation. The LC method was developed with a Nucleosil C8 analytical column and a mobile phase consisting of acetonitrile, water and triethylamine (at 210 nm). The validation
profile analysis (LPA) using Fourier method ofWarren. Exponential, Lognormal and Reinhold functions for the column length distributions have been used for the determination of these parameters. The goodness
using Cyberlab capcell pak, ODS C18 (250 × 4.6 mm i.d., 5 μm particle size) column in an isocratic mode, with mobile phase comprising water : acetonitrile : methanol in the ratio
Themolecular weight of the enzyme was estimated to be 88kDa by Sephadex G-75 column chromatography and 89kDa by sodiumdodecylsulfate gel electrophoresis (SDS-PAGE). The Km value for ïÃ
flow rate of 0.9 ml/ min was employed on a Phenomenax Luna C18 column (150ï‚´4.6 mm; 5ïÂÂ) at ambient temperature. The mobile phase consisted of acetonitrile
plasma. Separation of metoprolol and atenolol (internal standard) was achieved on a Ace C18 column (5ïÂÂm, 250ï‚´4.6 mm i.d.) using fluorescence detection with ïÃ
liquid extraction method. The samples were separated by GC on a DB-5MS analytical column and determined by a quadrupole mass spectrometer detector operated under selected ion monitoring mode
root powder of Pueraria tuberosa DC. The analysis was done with ThermoHypersilBDS C18 column (150mmï‚´4.6mmi.d., 5ïÂÂmparticle size) as stationary phase at a wavelength of 254 nmfor
chromatographed on a Hypurity C18 (50mmï‚´4.6mm i.d., 5ï particle size) column using 10ïÂÂL injection volume with a run time of 2 min. The precursor
validated. The analyzed drug substances could be elegantly separated on a reversed phase column[Nucleosil C18 (10ïÂÂm, 15cmï‚´4.6mm, i.d.)] isocratically by using a mixture of sodium
Chromatographic separation of the two drugs was performed on a thermo hipurity advance column (150ï‚´4.6, 5ïÂÂm) as stationary phase with a mobile phase comprising ofmethanol
simvastatin simultaneously in pharmaceutical preparation. Chromatographic separation was achieved on a C-8 column using a mixture of phosphate buffer pH 3.0 and methanol in the ratio
during synthesis, degradation products and the analyte was achieved on a Symmetry C8 LC column using a mobile phase consisting of a mixture of aqueous potassium dihydrogen phosphate, Sodium
related impurities. Separation achievedwith Symmetry shield RP-18, 250ï‚´4.6mm, 5ï column and amobile phase of buffer (0.05Mmonobasic potassiumphosphate and 30mL of 0.5M dodecyltriethylammonium phosphate
Solifenacin in bulk drugs. Separationwas achieved with aChiralpakAD(250mm× 4.6 mm, 10 µm) column. The ratio of n-hexane, ethanol and triethylamine in the mobile phase were optimized to obtain
preconcentrated as 4-(2-Pyridylazo) resorcinol chelates (Ni-PAR) fromsample solutions using a column containing Duolite XAD-761 and determined by flame atomic absorption spectrometry (FAAS). The optimal experimental…
10µm,150mm ï‚´ 4.6mm, i.d..)with particle size of 5 µm column, with a mobile phase consisting ofmethanol : de-ionized water (80 :20, v/v) ;and flow rate
internal standard. Chromatographic separation of these two drugs was performed on inertsil C18 column (250mmï‚´ 4.6mm, 5 µm) as stationary phasewith amobile phase comprising of 0.05MKH2PO4 :methanol
used to get petroleum ether extract. The separations of triterpenoids were carried out by column chromatography and preparative thin layer chromatography. The structure of these compounds was determined by spectroscopic
For authors and organisers
Publish, present and keep up with your field
Find the right journal for your paper and submit your manuscript.