Photonic crystals umbrella for Thermal desalination: Simulation study
coupling with the effect of 2D PCs. We design the considered structure by using COMSOL multiphysics which based on the finite element method
Articles, journals and conferences in one search. An exact title, DOI or ISSN is listed first.
In the search box: "exact phrase" · -leave out · OR · prefix* · title: author: journal:
coupling with the effect of 2D PCs. We design the considered structure by using COMSOL multiphysics which based on the finite element method
insertion of cathode/polymer composite, into 3D current-collector substrates, is developed based on COMSOL Multiphysics. In this model all electrochemical reactions instead take place on the interface between
channels to measure the BBB permeability by Transepithelial/transendothelial electrical resistance (TEER). COMSOL Multiphysics was used to simulate fine elements of both configurations, considering the liquid flow…
beam heat power was modelled and implemented through heat transfer in shells physics with COMSOL Multiphysics software. The heat power intensity was varied between 10 to 100W, and further increased
structure and the parameters, and the fabrication method to used is also presented. The COMSOL Multiphysics simulation program is used for the proof of concept. We have tested
thermal storage material and graphene nanoparticles as conductive fillers.The finite element method based on COMSOL Multiphysics 5.2a software, was used to solve the coupled equations of various physical phenomena
function of input load, geometry changes and materials addition. The software tool COMSOL Multiphysics version 4.2 is used to model the proposed design of pressure sensor. These studies are highly
field has recently been successfully used to achieve rapid warming of cryopreserved samples [13]. comsol multiphysics software (ac and dc modules coupled with the heat transfer module) were used
coupling of heat, air and moisture transport. The coupled PDEs are solved using the COMSOL Multiphysics time-dependent solver. This solver enables HAM (heat, air, moisture) modeling in porous media
galvanic corrosion of mild steel bolt in a magnesium alloy (AZ91D) plate simulation using comsol Multiphysics and 2k factorial experiments on factors that influence the recovery of gold during
continuity, momentum and energy equations, they need to be solved as simultaneous equations. Comsol Multiphysics 5.2a is capable of modeling such flows and is used for the simulation
material is chosen because of its high biocompatibility. Design is simulated by using COMSOL Multiphysics software. The designed filter can be used for point of care diagnostics and to culture
spring (1000 μm × 2000 μm). The Device operates in dynamic mode and simulated using COMSOL MULTIPHYSICS 5.2 version software. The output total displacement
total 48 points) from different parts of tissue. Then, the temperature data analyzed by COMSOL Multiphysics 5.2 software. However, the soft tissues temperature changes under diode laser treatment of osseointegration
malignant cells and protect the surrounding healthy cells. With the use of the COMSOL Multiphysics software, we have simulated numerically the ablation process. We have succeeded in achieving a directional
solving this problem, in this study, an MR damper model is designed and COMSOL Multiphysics software is used for finite element analysis. Finally, the analytical study is compared with experimental
variables of the present work. The computational work done by use a 5.0 COMSOL Multiphysics code to solve the problem. The results show a general decrease in the drag forces
thermal barrier coating material. Also, the focus on optimizing thermal barrier coating structure using Comsol Multiphysics 4.3 Software. Thermal barrier coating increase the engine operating temperatures hence…
been studied. This work is done by using Finite Element Analysis by using COMSOL MULTIPHYSICS simulation software, which is used to designed two index guiding photonic crystal fiber with
poles and the analysis was carried out using finite element method in COMSOL Multiphysics. Hall sensors were used for getting the position of the rotor for proper energisation
nominal power. The fluid dynamics module of the Navier- Stokes equation in COMSOL Multiphysics v 3.4 was used to verify and validate the results obtained. The results showed a velocity
this paper, we have reported the design and simulation of MEMS piezoelectric gyroscope by COMSOL Multiphysics
thickness of 25m. Simulation of the device has been done using the COMSOL Multiphysics software
motion resolution and maximum acceleration survival. Double folded beam accelerometer is designed in COMSOL multiphysics and the constraint values are compared with the theoretical values
this aim, two-dimensional fuel cell with interdigitated flow-field is modeled using Comsol Multiphysics 4.2a software. The operating temperature and doping level is selected
For authors and organisers
Find the right journal for your paper and submit your manuscript.