been investigated. Melting point, contact angle, elastic modulus values of Sn96.5Ag3.5 alloy decreased but electrical resistivity increased by adding cadmiumcontent it. Pasty range, internal friction and thermal…
wetting and corrosion behavior of Sn72Zn4Bi24alloy have been investigated.Melting point, elastic modulus, internal friction, contact angle and electrochemical parameters of Sn72Zn4Bi24alloy varied after adding…
internally tapered design creates significant friction via the high propensity of parallelism between the two structures within the joint space. The Morse taper angle is determined according to the mechanical…
alloys have been investigated. Melting point, contact angle and elastic modulus values of Sn91Zn9-xCdx alloy decreased but electrical resistivity, internal friction and pasty range values increased with increasing…
characterized by many uncertainties which are mainly related to the geotechnical parameters (angle of friction, cohesion, weight density etc.) of the slope material, the potential slip surface (position and geometry
various eccentricity ratios. The bearing load-carrying capacity, stiffness, lubricant flow rate, attitude angle and frictional torque due to bearing rotation increase with increase in eccentricity ratio and speed
drill string are the most efficient method for reducing friction and improving axial force transfer in high-angle and extended-reach wells. Modelling the dynamic response of AOT-involving drill
shear test method was found to provide more flowability properties such as angle of internal friction, cohesion, flow function and kinematic wall of friction than other methods. However, studies
different engineering properties like test weight, bulk density, true density, porosity, angle of repose and coefficient of friction of different grades of makhana were determined using standard techniques at moisture…
ties area, inclination and location, length of grout, dredging depth and backfill soil angle of internal friction to enhance this type of walls are analyzed and the results are presented
from the slope. The effect of various parameters including slope inclination angle, the angle of internal friction of soil, horizontal seismic loading, the cohesion of the silos and surcharge loading
from the slope. The effect of various parameters including slope inclination angle, the angle of internal friction of soil, horizontal seismic loading, the cohesion of the silos and surcharge loading
movement of the debris-flow mass is not occurred, and by changing the angle of internal friction, i.e., by its increasing, the speed of flow is reduced. It was found
geotechnical parameters like, uniaxial compressive strength, point load strength, tensile strength, cohesion and angle of internal friction have been studied experimentally as well as the results have been analyzed…
difficult to predict as it is influenced by various parameters such as, the angle of internal friction, position of the ground water table, position of anchor, density of soil, tidal
rice flour was evaluated using flow indicators viz., bulk density, aerated bulk density, angle of repose, frictional co-efficient, Carrâ??s index and Hausnerâ??s ratio; and powder flow analysis
pressure difference between two ends of the tube was measured by two piezometers. Then friction coefficient of the tube was estimated via Bernoulli formula. The second part of the experiments ... measure the dynamic…
mean diameters, sphericity, surface area, volume, true and bulk densities, porosity, repose angles and static coefficient of friction of the three varieties’ seeds were measured using standard methods. The results…
mean diameters, sphericity, surface area, volume, true and bulk densities, porosity, repose angles and static coefficient of friction of the three varieties’ seeds were measured using standard methods. The results…
mean diameter, sphericity, aspect ratio, bulk and true density, density ratio, porosity, angle of repose and static friction coefficient were determined. The average seed length, width and thickness were ... angle of…
moisture content increased the 1000 grain mass, geometric mean diameter, sphericity, angles of repose and friction on mild steel, wood and glass surfaces for both varieties. This study concludes that
studying the joint influence of the curve radius of curvature, steering angle and the road friction coefficient on the driving speed of the curve and the obtained speed is within
Newton hardness values of the coatings were determined and friction coefficients were measured by an oscillating tribometer. Water contact angles were measured with a goniometer. Thicknesses of the coatings were…
powder. These engineering properties were listed by researchers as size, dynamic angle of repose, coefficient of static friction, bulk and true densities, and porosity. The geometrical statistical data collected…
For authors and organisers
Publish, present and keep up with your field
Find the right journal for your paper and submit your manuscript.