complex frequency. The obtained filter characteristics include the natural frequency (ωo) and the quality factor (Q-factor) which are electronically tuned through biasing current of the transconductance gain
continuous film. The MMA can achieve absorbance of 99.1% and 98.8% with quality-factor (Q-factor) of 16.4 and 19.8 at 163.6 THz and 258.8 THz, respectively. The physical origin
ions. Microwave dielectric properties such as dielectric constant (εr), quality factor (Q×f) and temperature coefficient of resonant frequency (τf) were calculated using Agilent Vector network analyzer. The dielectric…
particular, the development of a laser assisted processing method to create optical microresonators with Q-factors in excess of 100 million will be discussed. Next, the adaptation of this process ... This new step…
towards receiver, due to physical layer impairments of the network, its quality degrades. The factors affecting the physical layer of the optical network are the linear and nonlinear effects ... optimal location have…
myopic defocus and in DE a central emmetropia with positive spherical aberration. Corneal asphericity (Q-Factor), corneal spherical aberration (C4, 0 and C6, 0), were measured in all patients before
millimeter sized piezoelectric quartz tuning fork (QTF) as an acoustic wave transducer. The high Q-factor and narrow resonance frequency band of QTF improve the QEPAS selectivity and immunity
Marousis A, et al. (2017) High performance refractive index sensor based on low Q-factor ring resonators and FFT processing of wavelength scanning data references and links. Optics Express
these models is judged on the basis of correlation, Fischer F test, and quality factor (Q). It is believed that this study is helpful in the design of potent PTP1B
variance (r2), Cross-Validation Test (q2), Standard deviation (s), r2-q2 < 0.3, Quality Factor (Q), Fischer Statistics (F) and Y-Randomization Test were used as a part of this study
BaZrO3 without any impurities. The dielectric constant (e¢ ), dielectric loss (e¢¢ ) and quality factor (Q) of the compounds have been studied at 1 kHz in the temperature range of 300K
suggesting hydrocarbon migration from the Eagle Ford Shale. High resistivity occurs in high-quality-factor (Q) attribute zones. Furthermore, resistivity and TOC increase as Q increases, suggesting that the Eagle
correlation (R), standard deviation of the regression (S), Fischer F test and quality factor (Q). These QSAR models may be used to find out the activity of the designed compounds
ring span length. In this manuscript we investigate the performance on the basis of Q factor, Eye diagram, timing Jitter and BER from the simulation setup designed on DWDM based
pure phase formation of CdO. The dielectric constant (ε′), dielectric loss (ε′′) and quality factor (Q) of the compounds have been studied at 1 kHz in the temperature range
droplets. Laser frequency locking on resonant modes and cavity lifetime measurements are performed recording Q-factors of 5x10 5 . Appealing applications for spectroscopy, material characterization and non-linear optics
pass-through signals are remarkably improved with respect to input data in terms of Q-factor and bit error rate(BER), demonstrating wavelength preserving and wavelength converting (Both
inner discharge tube diameter and the thickness depends on active medium and resonator Q-factor, and is about 2?5 mm. Lasers pumped by pulsed inductive discharge have high pulse
G.655). ITU G.653 gives optimum performance with the reach of 14 km at Q factor of 6.20 with an acceptable bit error rate of 10-10 without compensation among
For authors and organisers
Publish, present and keep up with your field
Find the right journal for your paper and submit your manuscript.