mobile phase comprised of acetonitrile300ml with 700 ml mixed phosphate buffer (pH 4.0). Analyses were run at a flow rate of 1.0 ml/min with the UV detector operating
solution to the problem is obtained as the observation at a fixed point (the detector) of this binomial distribution developing in time after reaching the exclusion limit. This ... which the equilibrium is formed…
mobile phase was filtered with a 0.45 μm membrane filter and degassed by sonicating for few minutes. The detection was performed at 213 nm using a Photodiode Array Detector
mobile phase was filtered with a 0.45 µm membrane filter and degassed by sonicating for few minutes. The detection was performed at 213 nm using a Photodiode Array Detector
mobile phase. The flow rate was 1.0 mL min−1, the column temperature 25 °C, and detection was by absorption at 233 nm using a photodiode-array detector
mobile phase mixture of potassium dihydrogen phosphage (0.1 M; pH 4.0) and methanol in a ratio 55:45 (v/v). The chromatographic data was acquired using photodiode array detector monitored
mobile phase, pumped in to the column at flow rate of 1 ml/min and the detection of eluent from the column was carried out using variable wavelength detector
detectors scanner. Dosimetric parameters such as CTDIvol, Dose Length Product, PDL, and effective dose were investigated to compare between the contribution of Volume CT and Dynamic CT phases
mobile phase was delivered in an isocratic mode at a flow rate of 1.0 mL min-1 at ambient temperature conditions and the analytes were monitored by conductometric detector
mobile phase contains buffer sodium dihydrogen phosphate 40 mM pH 3.5 – acetonitrile (56:44 %v/v); flow rate was 1.00 mL/min; which was detected by photodiode array detector
mobile phase consists of Orthophosphoric acid buffer: Acetonitrile (55:45 %v/v). The flow rate was 1.0 mL/min and eluents were detected at 240 nm using PDA detector
mobile phase containing methanol: buffer (0.02M KH2PO4) (70:30). The flow rate was 1.0 ml/min and effluents were monitored at 225 nm with help of PDA detector
mobile phase conditions at a flow rate of 1.0 mL/min and Symmetry Shield C18 column maintained at 35 ± 1°C. The eluate was monitored using an UV detector
mobile phase consist Potassium dihydrogen phosphate buffer and acetonitrile (70/30 v/v) was delivered at a rate of 1ml/min. The analysis was detected by using UV detector
mobile phase, methanol: water (70:30 v/v) adjusted to pH 3.0 via phosphoric acid 85% having flow rate of 1.0 mL min -1 at ambient temperature with detector
amobile phase of acetonitrile and 0.05%aqueous acetic acid (70:30, v/v) at flowrate of 1ml/ min using Naproxen sodium as internal standard and detection using PDA detector
mobile phase 0.1% orthophosphoric acid and acetonitrile (50:50% v/v) at a flow rate of 1.0 mL/min. The detection was carried out with UV-visible detector
proposed components were separated on a reversed-phase C18 analytical column using a mobile phase consisting of phosphate buffer (pH 2.5, 0.01 M)–acetonitrile–tetrahydrofuran (60:40:0.1% by volume ... detector (Model…
particle size 5 μm, maintained at ambient temperature).The mobile phase consisted of phosphate buffer at pH 6.8, acetonitrile in the ratio 50: 50 v/v. An isocratic elution ... ambient temperature and using ELICO SL 2203…
phase consisting of 0.5% orthophosphoric acid and 100% methanol (40:60 %v/v), at a flow rate of 1.0 mL/min. The analysis was performed using a UV detector
mobile phase ratio was (40:60 v/v) methanol: water, detection wavelength was 224 nm and 294 nm. The instrument used was SHIMADZU-HPLC system, Pump -HPD 20A, Detector
For authors and organisers
Publish, present and keep up with your field
Find the right journal for your paper and submit your manuscript.