that the specific energy required to cut the rock is predominantly influenced by uniaxial compressive strength of rock and the same can be determined through laboratory investigations. The current study
proportions of 20%, 40%, 60%, 80% and 100%. Experiments were conducted to determine the compressive strength, flexural strength and split tensile strength of concrete with various percentages of steel slag
filled nylon composites were compounded in a twin screw extruder. The tensile, impact , flexural, compression strength and wear samples in accordance with ASTM standards were produced
concentration in the prepared scaffold the porosity and the degradation rate decrease however, the compressive strength was enhanced. A sustained drug release pattern was observed from the optimized scaffold with
loading rate, size and specimen geometry are significant factors that affect the compressive strength of high performance concrete (HPC) under dynamic loading conditions. A numerical study is carried
additives in hydration process. The addition of additives in LFC showed no contribution on compressive strength but improvement in the flexural and shrinkage test results. LFC integrating various additives only
zeolite, activated carbon and cement as a binder to produce porous composites of high compressive strength. It is capable of physical removal of RB5 from solution besides providing surfaces
10cm x 10cm x 10cm) were prepared. The concrete blocks were subjected to unconfined compressive strength (UCS) at different curing days (7, 14, 21 and 28 days) to assess
equilibrium volume swelling ratio, number average molecular weight between cross-links, mesh size and compressive strength in buffer solutions of pH 7.4 and pH 3 at 37 ïÃ
days, 28 days, 90 days and 180 days. Setting time and compressive strength of control and blended composites were carried out. The hydrated samples were subjected to FTIR
analysis (XRF and XRD), Liquid and plasticity limit and plasticity index, particle size analysis compressive strength, flexural rupture strength, water absorption, apparent porosity, apparent density and Bulk density…
lowest total porosity than these values of total porosity. 30 mass%, GCB the compressive strength increases and shows the maximum values than all hardened blended cement pastes. 2006 Trade Science
animal models. Simvastatin is shown to increase bone volume, bone formation rate, and bone compressive strength. The use of statins for bone regeneration is a promising and growing area
scaffolds from 0 (control) to 30 wt. % enhanced the bioactivity test, biodegradability and compressive strength from 1.1±0.1 to 3.1±0.2 MPa, respectively. Besides, MTT assay also confirmed that
animal models. Simvastatin is shown to increase bone volume, bone formation rate, and bone compressive strength. The use of statins for bone regeneration is a promising and growing area
experienced slightly lower slump than the control concrete. The FSA concrete had a lower compressive strength than the control concrete; however, it produced sufficient strength for nonstructural applications. The…
cements were also measured. The ELP supplemented MTA and CPC showed a significantly enhanced compressive strength and anti-washout property. Incorporation of specific ELP enhanced the mechanical strength and handling
colonization. The presence of Diopside in the SF/CS/ Nano Diopside scaffold increased compressive strength and water uptake capacity and decreased porosity. Cytocompatibility of the SF/CS/ Nano Diopside scaffold
most widely used construction materials in the world. The concrete has high compressive strength but low tensile strength. Therefore, steel is used to reinforce the concrete. Steel has a very
Study of physico-mechanical properties of the bulked obsidian showed that the compressive strength of 4.5-9.9 MPa, the porosity is in the range 80-89%, water absorption
oral environment. Aim: The objective of this study was to evaluate compressive, diametral tensile strength and solubility of a nanofilled GIC (Ketac N100) compared to available GICs, Fuji IILC ... Fuji IX. Material…
class M25 was cast. For each Nanomaterial dozed,9 specimens for compression and split tensile strength respectively was prepared and tested at 7,14 and 28 days. A model ... compressive and split tensile strength…
hours. Then the particle board was tested for its mechanical tests like tensile strength test, compression test, bending strength test were experimented
moreover it becomes environmental friendly. The strength of concrete with partial replacement of waste tyre rubber chips at various percentages had been investigated. Compression and split tensile tests were carried…
existing formulation using t-statistics. Density (P1); compression set (P2); elongation (P3); hardness-index (P4) and tensile strength (P5) were formulated as functions of the rawmaterials (toluene-diisocynate, water…
For authors and organisers
Publish, present and keep up with your field
Find the right journal for your paper and submit your manuscript.