evaluated two management scenarios using decision-making tools. Consisted of a two treatment techniques pyrolysis for waste like infectious and pathological, while chemical disinfection for sharp waste, focus is made
form of isocyanates or polyurea structures. Usual methods of addressing the issue: landfill, pyrolysis/glycolysis, incineration. We propose the best alternative: restructure the scrap by grinding/pulverizing, desired…
SnO2 nanocomposite thin films were synthesised by spray pyrolysis technique with optimised deposition parameters by varying the concentration of tin oxide. XRD results have shown that ZnO/SnO2 nanocomposite thin
performance. Nanostructured ZnO films were deposited on highly conductive Si substrates by pulsed spray pyrolysis (PSP) method at a temperature of 400 °C, and then, vertically aligned ZnO nanorods were
recycle this e-waste PCBs in different methods like chemical methods, thermal or pyrolysis methods, mechanical methods, etc. In the above methods, the thermal and chemical methods produce a large
energy recovery. Novel process alternatives with high energy capture rates, such as high rate pyrolysis, gasification etc. were suggested instead of the traditional anaerobic sludge digestion. The paper also covered
materials are made via the wet impregnation of silica into bio-oil from the pyrolysis of waste office paper, followed by carbonization at different temperatures (300-800 oC). Materials
Since it is not recommended to use gasses for the fluidization purposes in pyrolysis, a saddle reactor has been built. It consists of two V-shaped pairs of arms connected
viable assay for microbial community dynamics study. Magnetic biochar samples were made by pyrolysis (600°C) of cassava (Manihot esculenta Crantz) that had been pre-treated with ferric and ferrous
fast technique of producing diamond-like films by chemical vapor deposition (СVD) via methane pyrolysis at ~1270-1420 K using a simple reaction cell in the form of a capacitor
under conditions of reforming. These materials include aromatic hydrocarbons and bio-oils produced through pyrolysis of biomasses and other carbon-rich materials (i.e. plastics); thus, bio-oils are complex
Biochar (BC) is a low cost adsorbent produced by the pyrolysis of biomass which can be used for water remediation and soil amendment purposes. Tea waste is an excellent biomass
used for the synthesis of cathode materials the wet method of extraction and pyrolysis that allows us to use secondary products as raw materials and reduce the temperature and time
wide industrial applications, which include direct liquid fuel cells (DLFCs) production, an additive in pyrolysis vapors, precursor for biological fuels and histidine synthesis and a key intermediate in methanogenesis…
Forest biomass pyrolysis is a thermochemical conversion that leads, among others, to pyrolytic bio-oil typically used as a biofuel alternative. Eventually, waste of pyrolytic bio-oil could constitute
stable and can be reused. The simultaneous thermal reduction of gold nanoparticles and pyrolysis of the matrix may facilitate the involvement of gold inside the carbon matrix, the modification
using renewable fuels is needed for sustainable development. Ethanol which can be produced by pyrolysis and fermentation of fruits, vegetable and agriculture waste is a renewable fuel for clean energy
will not rot or decay, leading to unwanted emission of green house gases. Traditional pyrolysis using hot flue gas to effect the heat transfer is not in line with economics
will not rot or decay, leading to unwanted emission of green house gases. Traditional pyrolysis using hot flue gas to effect the heat transfer is not in line with economics
Functionalized biochar (fBC) was prepared through pyrolysis of woody biomass and functionalized using oH3PO4 acid. Characterizations of fBC were carried out using Fourier Transmittance Infrared spectroscopy (FTIR)…
carbonization step followed by the activation process. The conventional carbonization method such as pyrolysis needs to use high energy due to high moisture and poor water dewaterability of wet sludge
been prepared from apatite or some vegetable waste of nuts and/or fruits by pyrolysis (500-700°C) at a reduced level of oxygen or by chemical treatment. In this
Potassium ions (K+), a core ingredient of espresso, play a viable role in facilitating pyrolysis kinetics and in achieving a well-developed microporous structure in the EKACs. As a result
For authors and organisers
Publish, present and keep up with your field
Find the right journal for your paper and submit your manuscript.