according to Langmuir`s adsorption isotherm. Potentiodynamic studies revealed that the inhibitor is of cathodic type. The results obtained from the EIS studies showed good agreement with the results from
Polarization measurements showed that the studied inhibitors are mixed type with significant reduction of cathodic and anodic current densities. The results of EIS measurements indicated that the corrosion of steel
efficiency increased with clay concentration. Polarization curves indicate that this inhibitor acts as a cathodic inhibitor. EIS spectra exhibit one capacitive loop. The charge transfer resistance (Rct) increases with…
lowering by increment of temperature. Potentiodynamic polarization for compounds given both the anodic and cathodic processes and play as mixed-type. The isotherm of adsorption of drug on metal follow
iron electrodes with dimensions of 2 × 20 cm were used as the anode and cathode. The electrodes were connected to the device of direct current generator as monopolar alternatively
Selenium is of fundamental importance to human heal th. Differential pulse cathodic stripping voltammet ry was used to determine the selenium concentrations in (140) s amples of human serum from
electrochemical study reveals that this compound is an cathodic inhibito r and corrosion current density is the order 120 μ A/cm2 of (T1) at the optimum concentration
Tafel polarization studies clearly reveal the type of inhibitor. This pyrazole derivative acts on cathodic and anodic rea ctions and reduces corrosion current density. Changes in imped ance parameters
electron microscopy (SEM). Polarization curves indicate that HPGCP is a mixed inhibitor, affecting both cathodic and anodic corrosion currents. The inhibition efficiency of HPGCP, which reached 96 %, was observed
hence increasing in inhibition efficiency. Potentiodynamic polarization study showed that the inhibitor act as cathodic-type inhibitor. The inhibition efficiency was found to increase with inhibitor content to attain
discussed. Polarization curves showed that Chenopodium extract is mixed-type inhibitor but the cathode is more polarized than the anode. The results obtained from chemical and electrochemical techniques
highest amount of current. Among th em, zinc mesh (anode) with graphite sheet (cathode) showed signif icant results. Mixed and pure algae cultures were u sed in single chamber
that the organic compound investigated act as mixed type inhibitor retarding both anodic and cathodic reaction. The impedance results show a change on the corrosion mechanism of brass
Potentiodynamic polarization data suggests mixed-mode of corrosion inhibition with predominant control of cathodic reaction. The studied inhibitor follows Langmuir adsorption isotherm. Data, obtained from EIS…
sheet was used as a sacrificial anode while platinum was used as an inert cathode. The electrolysis was carried out at varied current density for 2 hrs in aqueous solutions
mild steel substrate. Polarization curves indicate that compound is mixed-type inhibitor, affecting both cathodic and anodic corrosion currents. The morphological study indicated adsorption of inhibitor molecules on the…
reach 88% at 150 ppm. Polarisation curves show that A1 acts as a cathodic inhibitor. The increase in temperature leads to an decrease in the inhibition efficiency
LiMn2O4 cells with a lithium metal foil as anode and LiMn2O4 film as cathode of 1.5 cm2 active area. Cyclic voltammetry (CV) measurements have been carried out at sweep rate
studied inhibitor acts as mixed inhibitor in 1N HCl acid with significant reduction of cathodic and anodic current densities. The electrochemical impedance study further confirmed the formation of an adsorbed
increase in the concentration of inhibitor. Polarization studies indicated that inhibitor behaved as cathodic inhibitor. Diffuse reflectance spectroscopy confirmed the adsorption of inhibitor on the mild steel surface…
addition of inhibitor there is reduction in the anodic dissolution and retardation in the cathodic hydrogen evolution of carbon steel which describes it as a mixed type of inhibitor
increasing quantity of Nickel ions involves the modification of the intensity of the cathodic current of this compound without modifying its potential of reduction. In addition, there is a displacement
reaches 86 % at 40 ppm. Potentiodynamic polarization measurements indicate that M1 compound is cathodic type inhibitor. Appropriate electric equivalent circuit model was used to calculate the impedance parameters. The…
nanotube carbon paste (SWCNT-CP) electrode the anticancer drug BIC produced a well-defined cathodic reduction peak which decreased on addition of CT-DNA. On increasing concentrations
revealed that the corrosion inhibitor shifted corrosion potentials to more negative potential indicating prominent cathodic protection. The impedance data showed a decrease in double layer capacitance and an increase
For authors and organisers
Publish, present and keep up with your field
Find the right journal for your paper and submit your manuscript.