ions and temperature. The single component equilibrium data was analysed using Langmuir, Freundlich, Dubinin-Radushkevich and Temkin adsorption isotherms. The results showed that equilibrium was reached within…
powder was achieved maximum after 24 hours at various temperatures and found to follow Freundlich isotherm. The in-vitro ciprofloxacin release from various hydroxyapatite-ciprofloxacin minipellets was slow and sustained…
range of 8.4-8.7 by the pH drift method. The pseudo second-order kinetics model had the highest value of R2 and the equilibrium amount calculated from the pseudo second ... mg.g-1 with the rate constant of adsorption…
literature. However experiments were conducted at 30°C, 50°C and 60°C. Theoretical Modeling Simulations: All theoretical calculations were performed with the density functional theory (DFT)(5) electronic structure…
contact time on the removal capacity and determination of generic adsorption coefficient by WASP model is computed. The result of analysis showed that the adsorption capacity of the heavy metals ... concentration of…
phenol solution. Among the kinetic models applied, pseudo-second order model fitted well. The optimum pH is found to be 5 whereas the optimum temperature for adsorption ... direct relation to the adsorbent dose. The…
fitted to pseudo-first (Lagergren model) and pseudo-second order kinetics. According to the modelling, experimental data is better resembled to the pseudo-second order kinetics as shown ... needed to reach equilibrium…
respectively. The adsorption process is in conformity with Freundlich isotherm for both RhB and AO7. In both the cases, adsorption occurs very fast initially and attains equilibrium within ... that the adsorption of RhB…
reactive dye, C.I. reactive red 2 (Red M5B) from aqueous solution. Out of applied Freundlich, Langmuir, Tempkin and Dubinin-Radushkevich (D-R) isotherms, Langmuir isotherm was fitted well with ... pseudo-first-order…
time ,temp eratures , initial concentrations and pH values hav e been investigated . Langmuir and Freundlich isotherms ar e fitted on the experimental data of adsorption of the studied system. Depending ... estimated…
cost biomass and important agricultural waste, for the adsorption of methylene blue. Freundlich and Langmuir isotherms were used to describe equilibrium nature of adsorption. The maximum adsorption capacity for…
were investigated and discussed. The isotherm data were analyzed using Langmuir and Freundlich equations. The equilibrium data fitted well Langmuir isotherm for both CNT and MCNT- HNO3. The kinetic results…
uptake. Experimental equilibrium data for AMX adsorption were analyzed by Langmuir, Freundlich, and Sips isotherms. The results showed that the best fitting was achieved by Sips isotherm with high adsorption ... kinetic…
were studied using batch method. The data were fed into various isotherm equations – Langmuir, Freundlich, Redlich Peterson and Dubinin- Radushkevich and the best fit was envisaged. Thermodynamic parameters like changes…
were investigated. Batch kinetic experiments showed that the adsorption followed pseudo-second-order kinetic model. The pH value of 3, contact time of 75 min, adsorbent dosage ... optimum conditions. The equilibrium…
citrus aurantifolia respectively. These are characterized by SEM-EDAX, FT-IR analysis. The Freundlich, Langmuir, Tempkin and Dubinin-Radushkevich (D-R) isotherms were used to describe adsorption equilibrium. The results…
order to investigate the mechanism of fluoride removal, various adsorption isotherms such as Langmuir, Freundlich, Tempkin and Herkin-Jura were fitted at 293, 303, and 323 K . The experimental data ... adsorption…
contact time and temperature. The adsorption isotherms are described by means of the Langmuir, Freundlich, Tempkin and Sips isotherms. It was found that the Langmuir equation fit better than ... kinetics of Acid Red 88…
adsorption was studied. The obtained data were fitted with the Langmuir and Freundlich equations to describe the equilibrium isotherms. The characteristic parameters for each isotherm have been determined ... range for…
full factorial central composite design was employed. According to ANOVA results, the proposed quadratic model for CCD fitted very well to the experimental data. The optimal set of conditions ... Langmuir isotherm…
form of even mess size. Sorption kinetic data has shown first order reversible kinetic model for all the sorbents in which bio- sorption of chromium by Trapa natans biomass occurred ... Trapa natans. Experimentally…
were considered. The adsorbents Eichhorniasp., and potato peel nicely fitted with D-R and Freundlich isotherms, respectively. The kinetics data were found to fit well with pseudo-second order ... initial concentration…
For authors and organisers
Publish, present and keep up with your field
Find the right journal for your paper and submit your manuscript.