Corrosion Control of Aluminum Alloy in HCl Medium Using Extract of Ocimum gratissimum as Inhibitor
extract was identified as mixed-type inhibitor that can control both the anodic and cathodic corrosion
Articles, journals and conferences in one search. An exact title, DOI or ISSN is listed first.
In the search box: "exact phrase" · -leave out · OR · prefix* · title: author: journal:
extract was identified as mixed-type inhibitor that can control both the anodic and cathodic corrosion
using Potentiodynamic Polarization method and AC Impedance spectra techniques. Potentiodynamic Polarization study to determine cathodic or anodic reaction, corrosion current, linear polarization resistance and AC…
Potentiodynamic polarization curves revealed that this inhibitor acted as mixed-type inhibitor, affecting both cathodic and anodic corrosion processes. The adsorption of the inhibitor on carbon steel surface
effective inhibitor. Potentiodynamic polarization measurements studies showed that Anemone coronaria Extract act essentially as cathodic-type inhibitor for steel in 1.0 M HCl. The inhibition efficiency increased with…
Electrochemical methods show that it acts as mixed-type inhibitor with predominant cathodic action. The AOTP admits as the Langmuir adsorption. Attempt to correlate the molecular structure to quantum chemical
measurements showed that the 20 studied inhibitor is mixed type with significant reduction of cathodic and anodic current densities. Electrochemical 21 impedance spectroscopy measurements revealed that the charge…
Electrochemical methods show that it acts as mixed-type inhibitor with predominant cathodic action. The SFG admits as the Langmuir adsorption. The thermodynamic activation parameters for the corrosion reaction were
nanopowder preparation and its X-Ray diffraction studies are reported in this paper. Electrolytic cathode deposition method is simple and cheapest process for its preparation. Copper nanopowder has been prepared
Plexiglas cell, the Ti foils (99.96%) serves as anode and platinum foil as cathode while the electrolyte was ethylene glycol containing (0.5%) NH4F and (4%) de-ionized water
100mVs−1 compared to the Mn2O3 Nps/ CPE. Its anodic peak potential and cathodic peak potential were located at −150mV and −200mV (vs. SCE), respectively. The formal potential
nanoparticles of ZnO supported by the zeolite and their performance in terms of cathodic luminescence so effective as photocatalysts, and resistant circles in ultraviolet rays with antimicrobial properties. ZnO…
nickel sulfide system have potential to be used as bifunctional catalysts for water splitting, cathode materials for lithium-ion batteries, absorber layers for solar cells, hydrodesulfurization catalysts, or…
inocula on the finely ground pine tree (Avicel) at 2% (w/v) and the cathode chamber of 10mM phosphate buffered saline conductive solution, both separated by a cation exchange membrane
sample. The negative terminal was connected to a steel plate acting as cathode. Both electrodes were placed in the tank face to face with
difficult to search so that we must do some inferences. The reaction of the cathode for ORR is and its balance electrode potential is 1.23V. Learning the oxygen reduction
prior to electrowinning. It was found that the maximum weight of nickel cathode is 5.07 g or at 90.7% recovery of 97.46% purity can be achieved in a condition using
achieved by simply incorporating a thin layer of alcohol/water-soluble polymer as the cathode interlayer. In our recent work , the fundamental losses in VOC of PSCs based on narrow
this study. Each electrode materials were formed by a slurry coating method. The cathode was NiO-3%MgO, electrolyte matrix was LiAlO2, the anode was Ni-2%AlCr (+10%Al2O3
alloys of nickel, titanium, aluminium and magnesium, to ceramics, including zirconia and silica, to cathode materials for lithium ion batteries. Important aspect of such studies concerns the integration between
providing the synergic functions of back contact for the PSC and the cathode of the capacitor section, as explained earlier. Figures 1(ab) schematically introduces the device architecture
anode into the response answer that interacted with the hydroxyl ions produced on the cathode to shape aluminium hydroxide. The hydroxides flocculated and coagulated the suspended solids, purifying the polluted
number of niche chemical manufacturing uses, such as a catalyst for hydrogenation, battery cathodes, pigments and metallic surface treatments. Nickel is an essential nutrient for certain microorganisms and plants that
prior to electrowinning. It was found that the maximum weight of nickel cathode is 5.07 g or at 90.7% recovery of 97.46% purity can be achieved in a condition using
refining process. The effects of electrolysis voltage to the amount and purity of copper cathode were studied. It was found that the optimum parameters for copper purification were using
period of 60 days. The cells were established with organic matrices, microorganisms, anodic and cathodic compartments and anaerobic conditions. Temperature, pH and voltage monitoring was carried out by sensors recording
For authors and organisers
Find the right journal for your paper and submit your manuscript.