microstructural characteristics were examined by optical microscopy, scanning electron microscopy (SEM), and X-ray diffraction analysis. The corrosion performance examination was carried out under in in vitro…
membrane matrix. The synthesized GO-ZrP membranes were characterized by X-ray diffraction, scanning electron microscopy (SEM) and transmission electron microscopy (TEM). Water content and ion exchange capacity were found
Transmission Electron Microscopy (TEM), Scanning Electron Microscopy (SEM), Infrared Spectrophotometer (IR) and X-Ray Diffraction (XRD) to prove the quality of nano asphalt. Lately, the utilization of polymer…
arranged examples were additionally portrayed utilizing gadgets contemplating (Ti) properties, X-Ray Diffraction (XRD), Fourier Transformation Infrared Red (FTIR) and USB Spectrometer. As 0.25g from the two examples
LaAlO3 substrates. Substrates were vicinal with off angles up to 20°. X-ray diffraction j - y scans demonstrate that films grown on a flat substrate are composed of twinned grains
reported. The synthesized samples were characterized by Fourier transform infrared spectroscopy, X-ray diffraction, scanning electron microscopy electrical and dielectric properties (resistivity and conductivity). The…
method they were characterized by (FTIR) Fourier transform infrared spectroscopy, (XRD) X-ray diffraction, (SEM) scanning electron microscopy, (TEM) transmission electron microscopy and (VSM) Vibrating Sample…
prepared ZnO–NPs were characterized by transmission electron microscopy (TEM), powder X-ray diffraction (PXRD), UV–visible spectroscopy (UV–vis) and Fourier Transform Infrared (FTIR) spectroscopy. Spherical ZnO–NPs were
periodic in short range in direction z. In the present contribution, x-ray diffraction and transmission electron microscope studies were carried out on two copper based CuZnAl and CuAlMn alloys ... alloy samples have…
adsorbent materials in RNA purification, they will be characterized by low angle X-ray Diffraction (SAXRD, Small-Angle X-Ray Diffraction), Raman spectroscopy, thermal analysis and gel electrophoresis
without and with polysaccharide was characterized using ultraviolet-visible (UV-Vis) spectroscopy, X-ray diffraction (XRD) and Fourier-transform infrared coupled with attenuated total reflection instrument (ATR-FTIR)…
Sample composition is confirmed using Energy Dispersive X-Ray Spectroscopy (EDS) and X-ray Diffraction (XRD). Results show nanomaterial Cu to have a much smaller grain size than conventional
microwave photons need to be detected. Such a beam may also produce scattered or diffracted photons that must be efficiently absorbed. A structure or method of absorption is discussed
Purpose: To compare refractive and visual outcomes of two diffractive monofocal intraocular lenses (IOLs) with different tinting and spherical aberration values. Study design: Retrospective case series. Methods: The…
silicon chips and annealed to the multi-lamellar RBC membranes. High steadfastness X-ray diffraction has been used to regulate the molecular structure for the stacked membranes. We current direct
characterized by intrinsic viscosimetry, 1H nuclear magnetic resonance, infrared spectroscopy and X-ray diffraction. Copolymer micro particles loaded with ibuprofen were prepared by an oil-in-water (o/w) emulsion
microwave photons need to be detected. Such a beam may also produce scattered or diffracted photons that must be efficiently absorbed. A structure or method of absorption is discussed
constituents of the powders before and after consolidation were mainly characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM) and energy dispersive
electrospinning. Each NF was characterized using Fourier transform infrared spectroscopy and X-ray diffraction. The scaffold morphology and average diameter of the NFs were determined using scanning electron microscopy
conditions. The thermogravimetric technique was used to establish the kinetics of corrosion. X-ray diffraction (XRD), scanning electron microscopy (SEM) and electron probe micro analyser (EPMA) techniques were used
electrochemical CO2 conversion reaction kinetics. The in-situ synchrotron X-ray absorption, emission and diffraction spectroscopies were conducted to systematically investigate the materials properties
ultrasonically atomized nanocrystalline ZnO powders were studied. The powders were characterized using X-ray diffraction (XRD), transmission electron microscopy (TEM), selective area electron diffraction (SAED)…
foam scraper was only removing loose deposits in the pipeline. The X-Ray Diffraction (XRD) analysis indicated that the top layer of the deposits consisted of 50% sand
For authors and organisers
Publish, present and keep up with your field
Find the right journal for your paper and submit your manuscript.