3000ppm) of the milieu. X-ray diffraction studies of experimental (Al exposed) and control (without Al exposure) samples of bone powders reveal a change in position (2ϴ) and d-spacings ... peaks of calcium…
material prepared by mixed oxide solid state route were studied. X-Ray Diffraction (XRD) showed that the calcined powder of (Ba0.4Ca0.6) Ti4O9 at 900°C crystalizes in the phase
temperatures on structural and thermal properties of Calcium Phosphate based powders have also been characterized by using X-Ray Diffraction, Fourier Transform Infrared, Thermogravimetric/Differential Scanning…
different methods: solid state method, sol-gel method has been used to prepare BaTiO3 powders. BaCO3, Ba(OH)2.8H2O and [CH3COO]2Ba were used as barium precursor and TiO2 ... precursor. With the help of thermal…
particles have been characterized by X-ray diffraction (XRD), scanning probe microscope (SPM) method. Ultra fine sized powders with a tendency towards aggregation have been obtained. The tendency towards crystallization
next stage was thermo-pressing of obtained mixed powder. Obtained composites were investigated using scanning electron microscopy, X-ray diffraction analysis and IR-spectroscopy analysis. Influence of concentration and…
samples were characterized by XRD, FTIR, and Photoluminescence. The X-Ray diffraction patterns reveal the crystallite size of powder. The doped compound emits blue light when the concentration
evidence from simulation and from dynamic x-ray radiography (DXR), also conducted at the APS. DXR has revealed entrapment of voids (from powder particles) in melt pools, keyholes (i.e., vapor ... provides information on…
X-ray diffraction pattern showed that in unit cell of fluorotrioxochroamte the ions arranged in a hexagonal closest packing with Z = 4. The cation and anion moieties are separated from ... arranged in an alternative AB…
various compositions ofMgNi ferrite systemwere synthesized by coprecipitation technique. The resulting powder of composition Mg0.5Ni0.5 Fe2O4was further heated at different temperatures from600oC-1000oC for four hours…
crushing them into CaCO3 powder. The powder was characterized using X–Ray Diffraction (XRD), Scanning Electron Microscope (SEM), Energy Dispersive X-Ray Analyser (EDXA) and Fourier Transform Infrared
polymerization from 323 to 116, respectively. X-ray diffraction and TGA analysis of both raw banana stem and extracted NC powder shows significant increase in crystallinity and thermal property
prepared BLA were determined by using spectrometry and X-Ray Diffraction (XRD) respectively. Then, as-prepared BLA powder, weight percentages (0%, 2%, 4% and 6%) were used to develop
spectroscopy (EDS), Fourier Transform Infrared spectroscopy (FT-IR) and X-Ray Diffraction (XRD) analysis of Fe substituted calcium phosphate powders showed the formation of spherical nano particles of Fe doped
NH4OH were used as precursors to yield ZnO powders. The synthesized ZnO nanoparticles were characterized by X-ray diffraction measurements (XRD), scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy
ball mill. Two ball-to-powder ratios, four milling times and two milling speeds were used. The material was characterized by X-ray diffraction (crystalline phases and crystallite size), particle
calcinated where a powder is procured. Subsequently the obtained powder is analyzed by Scanning Electron Microscope (SEM), X-Ray Diffraction (XRD), UltraViolet (UV) and Particle size analyzer methods where
improved Hummers method, was reduced with zinc powder under ultrasonication, followed by washing with HCl. X-ray diffraction and scanning electron microscopy showed ZnO nanoparticles decorating the reduced graphene oxide
accomplished by the slow evaporation solution growth method. The X-ray diffraction analysis confirms the crystal structure. The Kurtz powder second harmonic generation (SHG) test showed potential for optical
type Bunsenite NiO powders with an average crystallite size of 21 nm (as shown by x-ray diffraction analysis) were produced via biosynthesis and heat treatment, using aqueous extracts from
obtained pellets are characterized by: X-ray diffraction, MET. The XRD spectra indicate that pure and Mn doped ZnO powders are solid solution, with an average grain size varying between
powder nanoparticles mechanically alloyed were doped with iron to investigate their structural and microstructural properties using X-ray diffraction (XRD) and differential scanning calorimetry (DSC) for examined 1% Fe…
synthesis of nano sized titanium oxide powders for use in Li-ion Batteries. Analytical tools like, X-Ray Diffraction (XRD), Field Emission Scanning Electron Microscope (FESEM) and Transmission Electron Microscope…
For authors and organisers
Publish, present and keep up with your field
Find the right journal for your paper and submit your manuscript.