Preparation and Characterization of Nanobioactive Glass Composites for Bone Tissue Engineering
using ICP-AES after dissolving the NBG samples in hydro fluoric acid (HF).The SiO2, CaO and P2O5 molar ratio was found to be 77:21:3.The XRD analysis
Articles, journals and conferences in one search. An exact title, DOI or ISSN is listed first.
In the search box: "exact phrase" · -leave out · OR · prefix* · title: author: journal:
using ICP-AES after dissolving the NBG samples in hydro fluoric acid (HF).The SiO2, CaO and P2O5 molar ratio was found to be 77:21:3.The XRD analysis
experiments were conducted over an in-house 37% Co-based catalyst on a SiO2 support over a wide range of operating conditions (i.e., temperature of 503-543 K, total pressure
experiments were conducted over an in-house 37% Co-based catalyst on a SiO2 support over a wide range of operating conditions (i.e. temperature of 503-543 K, total pressure
found the synthetic materials have a characteristic amorphous phase of SiO2. The TEM images show that the effect of the hydration level in the size and morphology
electrospinning method. Boron-modified bioactive glass particles with mole percentages of (51% SiO2, 38% CaO, 4% P2O5, 7% B2O3) were synthesized and characterized. The obtained material was amorphous
membranes have been synthesized using bioactive ceramic material (bioactive glass) with composition of SiO2: CaO: P2O5 with polymers chitosan, alginate and PCL. Kaolin and bentonite clays have been used
wide mesa using wet chemical etching and a SiO2 for passivation. Multimode emission with pulsed peak power up to 700 mW at 30Ã?°C and above 200 mW at 100Ã
This study investigated the effects of silica (SiO2) morphology on emulsion paint properties by comparing the physical properties of emulsion paints produced with amorphous silica ( rice husk ash) with those
processed in 50 - to 70 - µm wide mesa using wet chemical etching and a SiO2 for passivation. Multimode emission with pulsed peak power
especially SrO for CaO, and Ln2O3 (Ln=La, Nd, Gd, and Yb), for MgO + SiO2 in Al-containing diopside on the structure, sintering and crystallization behaviour of glasses and properties
dialkyl acetylene dicarboxylates (dialkyl but- 2-ynedioates) in the presence of silica gel (SiO2) led to alkyl 2-(dialkylamino)-4-phenylthiazole-5-carboxylates in fairly high yields. The structures
husk with the addition of additives TiO2 had been achieved. The analysis showed that SiO2 content in rice husk ash amounted to 82.12%, while 17.88% is the amount of oxide
ordered vertical arrays of ZnO nanowires (NWs) have been grown on substrates including silicon, SiO2, GaN, and sapphire using a metal organic chemical vapor deposition (MOCVD) growth process. Co-axial
ordered vertical arrays of ZnO nanowires (NWs) have been grown on substrates including silicon, SiO2, GaN, and sapphire using a metal organic chemical vapor deposition (MOCVD) growth process. Co-axial
novel hydrophilic coating material are introduced according to the film thickness. Because water based SiO2-abundant material has perfect transparency, as does glass, and a hydrophilic property
Silica (SiO2) and titanium dioxide (TiO2) nanoparticles are widely used in agricultural, cosmetic and medical products. However, sampling devices are not readily available to help environmental scientists assess the…
some amount of kaolinite, illite, quartz and feldspars, and they display high content in SiO2 (61.07 – 77.78 %), average content in Al2O3 (7.08 – 15.54) and low amount in Fe2O3
situ generated supported silicomolybdic heteropolyanions from the sol-gel synthesized MoO3/SiO2 catalyst for the acetylation of glycerol. The best results were obtained at 118°C using a glycerol: AcOH
advantages of the presence of the biologically relevant ions such as Mg2+, Sr2+, SiO2- 4, F-, K+ and Na+ ions in the cement properties. The setting time of the ETTCP
mixture was composed of a blend of pure calcite (CaCO3) and silica amorphous (SiO2) powder with 57% wt. and 43% wt., respectively. Then, the powder mixture milled by high energy
Saudi Arabia. The collected samples from the site are composed of 98% quartz (SiO2 ), with very minor traces of carbonate and dark minerals which account for the rest
later selected for geochemical analysis. The result of the geochemical analysis revealed that silica (SiO2) is the most abundant major oxide when compared with other oxides present
allocated. Also in the form of a suspension at solution there are Al2O3, SiO2, CuO, ZnO, MgO. Studying of structure and physical and chemical properties of briquettes from combustible slates
molybdenum waste catalyst (MWC) that contain wt %: 42.79 Mo, 9.54 Fe, 4.9Al, 8.68 SiO2, 6 Na, and 1.5 Cr using different leaching agents such as H2SO4, HCl, and NaOH
minor amounts of Na–feldspar. This study reveals that the average amount of silica (SiO2) and alumina (Al2O3) are 51.9 and 19.6 wt.%., respectively. The contents of lime
For authors and organisers
Find the right journal for your paper and submit your manuscript.