films exhibited wurtzite structure with preferred orientation. AFM (3D) images showed that the surface roughness varied from 0.451 μm to 0.155 μm as Zn/Se ratio decreased. The reflectance spectra
evaporated tin thin films. Surface morphology showed spherical shaped particles of tin oxide. The surface roughness was found to increase with increase in oxidation temperatures. As the oxidation temperature increases
malignancies. Hair photodamage leads to loss of mechanical strength, luster and an increase in surface roughness. The aim of this study was to compare the effect of sun exposure
untreated fabric dyed with disperse dye upon the same dyeing conditions. Fabric wettability, surface roughness and fastness properties were also given. Microscopic analysis of the cross section of the dyed
fine and fluffy physical state of optimized formulation along with their porous and rough surface as supported by SEM photomicrographs might have contributed to the enhanced solubility and dissolution rate
Diffraction (XRD), and Histopathological study was also performed. The SEM demonstrated spherical particles with rough surface. The XRD studies show amorphous nature of drug entrapped in microspheres. The…
endophytes inhibited more biofilm-forming bacteria than epiphytes. Interestingly more isolates were obtained from rough surfaces both from fiber and wooden panels than smoothe surfaces. Bacterial symbionts of seagrass…
method. Potentiodynamic cyclic polarisation technique was used to investigate the mechanism of corrosion. The surface roughness and morphology of deposits were studied byAFM and SEM analysis. XPS analysis was carried
between packable bulk fill composite resin and Nano hybrid composite resin in marginal discoloration, surface roughness and caries detection, whereas statistically significant differences between both materials in…
semiconductor material with metallic reflectors, nano-particles or wave-guides, transparent conductive layers, surface roughness, and other simultaneous light trapping/career mobility improvement mechanisms, and…
diameter greater than 3.3 mm and a length of at least 10 mm, rough surface and is expected to conventional healing period. Periodic reminders of 2, 4 months prior
diameter greater than 3.3 mm and a length of at least 10 mm, rough surface and is expected to conventional healing period. Later we checked the torque (iChiropro
regard to surface and colour criteria, colour mismatch within the range (34.8%) and slight surface roughness (26.6%) were the most common defects. The most frequent defects of the anatomical form
compared to those with PVA-ad as gate dielectric. The AFM images illustrated higher surface roughness for irradiated devices. Additionally, granular and uniform morphology with grain sizes in the range
posterior maxilla sometimes show good results under limited conditions as follows; Utilize micro-rough surface treated implants, maintain around 30~55Ncm of insertion torque on implant surgery, confirm the implant
columnar-like structure with an average vertical dimension of 244±19 nm and a surface roughness of 16.3 nm. EDS analysis showed the coating was deposited without any detectable impurity
Clinical factors recommended to achieve predictable long term success for IL in mandible include rough surface and threaded implants to achieve good primary stability and an insertion torque of atleast
images showed surface morphology. Quantitative AFM analysis showed large spherical islands, The RMS surface roughness measured increased from 4 nm to 9 nm. PDF HTML
inexpensive procedure. The effect of nanoparticle size and %wtZnO was also investigated. The surface roughness and features of the ZnO/PVC nanocomposites were visualized using SEM. Results demonstrated that this
source. The silica nanoparticles obtained by calcining HCl treated RHs, which possess a very rough surface, was first modified by (3-aminopropyl)triethoxysilane (APTES), which was designed to play
placement where bone was deficient. However a combination of higher success rates with short rough surface implants and modifications of surgical techniques requires us to reassess the widespread
fiber such as the hollow lumen, the twists and the crimps, and the surface roughness and its porosity. Kapok fibers have been investigated for their properties and performance
uniformly cylindrical. Their thick, deep green skin has light green stripes and a rough surface with strong trichome. Their skin is bitter in taste and not easily digested
extracted from three different types of solvent namely toluene, methanol and acetone. The roughness of metformin surface ... were monitored by using high resolution AFM-microscope. Results indicated that as roughness of…
inorganic substance absorbed onto the surface. The observation showed that the microplastics surfaces were irregular, rough, hollow and porous, indicating severely weathered and eroded. Some microplastics surfaces had…
For authors and organisers
Publish, present and keep up with your field
Find the right journal for your paper and submit your manuscript.