bioplastic in creating novel biobased materials for new industrial uses. The coproducts from biofuel, pyrolysis as well as food processing industries show immense potential as fillers or reinforcing materials
direct injection(DI) diesel engine, fueled with an upgraded Jatropha Methyl Ester (JME) – Wood Pyrolysis Oil (WPO) emulsion which is referred to as ATJOE15, were studied. The ATJOE15 comprises
micro-syringe, micro feeder, or sample cup for gas preheating, liquid vaporization, or solid pyrolysis. The vapors from the 1st furnace meet the catalyst located in the catalytic
single-element and multi-element mode (with and without modifiers) was studied. The pyrolysis and atomization temperatures for the simultaneous determination using the mixture modifier were 800 and 1900oC
dried stem, mature calyx attached to fruits and hair present on the cob), on pyrolysis using three different nano transition metal catalysts (Ni, Fe and Co) and different temperatures
substrate temperature of 450°C onto the F:SnO2 coated glass substrate by spray pyrolysis technique. The n-ZnO layer was followed by a layer of p-CuO (d~400
single-element and multi-element mode (with and without modifiers) was studied. The pyrolysis and atomization temperatures for the simultaneous determination using the mixture modifier were 1000 and 1900oC
carbon black which is required. This study focused on the feasibility study on the pyrolysis of waste tires to give carbon black, pyrolytic oil, steel and syngas as waste products
starting compounds are obtained from petroleum through thermal and catalytic processes such as pyrolysis, thermal cracking, catalytic cracking, reforming and catalytic hydrogenation. These starting compounds are…
starting compounds are obtained from petroleum through thermal and catalytic processes such as pyrolysis, thermal cracking, catalytic cracking, reforming and catalytic hydrogenation. These starting compounds are…
carbon black which is required. This study focused on the feasibility study on the pyrolysis of waste tires to give carbon black, pyrolytic oil, steel and syngas as waste products
exhibited the typical performance of lignocellulosic materials, with two reaction zones (active and passive pyrolysis). The kinetics of these zones was studied through isoconversional approaches (OFW and Starink). Values
materials with nitrogen precursor. Especially, nitrogen and transition metal containing carbon composites fabricated via pyrolysis of precursors containing metal salts, nitrogen, and macrocyclic compounds have been…
environmental point of view, in order to analyze its possible valorization. Studies on pyrolysis of pistachio shells for energy production have been carried out by various authors. It was observed
alternative fuel source is becoming increasingly apparent. Bio-oil is produced through fast pyrolysis or hydrothermal liquefaction routes. But the produced bio-oil has high oxygen content, leading
develop and produce different new bio-fertilizers using different technologies such as pyrolysis, anaerobic digestion, composting, and microalgae cultivation. Different technologies and bio-fertilizers developed in this…
fruit processing and dairy industries), municipal solid waste and sewage sludge. Our research on pyrolysis, hydrothermal liquefaction, supercritical water gasification and fermentation of these feed-stocks to…
Organophosphorus compounds are widely used in the manufacturing industry and pyrolysis is most commonly used for their destruction. These compounds dissociate in to chlorinated alkyl sulfides and further dissociate
this application. Arrays of MWCNTs were synthesized via chemical vapor deposition (CVD) by spray-pyrolysis method. An aliquot of these MWCNTs array was oxidized by concentrated nitric acid. The Fourier
However, wood smoke generates some unfavorable compounds such as Polycyclic Aromatic Hydrocarbons (PAHs) upon pyrolysis, which occurs between 180 and 350 Ã?°C. These PAHs are generally known
However, wood smoke generates some unfavorable compounds such as Polycyclic Aromatic Hydrocarbons (PAHs) upon pyrolysis, which occurs between 180 and 350 °C. These PAHs are generally known to be carcinogenic
mineral content in the biochars (p<0.01). Goethite and Montmorillonite additions to biochar before pyrolysis increased macropores of size <0.3 μm. Added Goethite reduced bacterial survival, while montmorillonite…
concentration doped ZnO thin films on glass substrates by using the chemical spray pyrolysis technique and subsequently the effect of Co on the structural and optical properties of the deposited
energy absorption of the endothermic breakdown of the polymeric constituents, transpiration cooling as the pyrolysis gases percolate from the interior of the material to the surface, and re-radiation from
TMSCS). Graphene has derived from coal tailings that have been carbonized 400°C and pyrolysis 800°C. Sulfonation degree were obtained 125%, FTIR spectrum showed that a symmetric vibration sulfonate
For authors and organisers
Publish, present and keep up with your field
Find the right journal for your paper and submit your manuscript.