samples were determined in this investigation. Microstructure studies were conducted using X-Ray diffraction (XRD), Thermogravimetric analysis (TGA/DTG) and Attenuated Total Reflectance Fourier Transform Infrared…
reported. The synthesized samples were characterized by Fourier transform infrared spectroscopy, X-ray diffraction, scanning electron microscopy electrical and dielectric properties (resistivity and conductivity). The…
Further, the optimized formulation was characterized by differential scanning calorimetry, powder X-ray diffraction, and ATR-FTIR spectroscopy. A decision tree to aid in selection of solvent, anti-solvent
objective. Spectrometer had a focal length of 284 mm with 1200 g/mm diffraction grating and was equipped with an Andor IDus 401 CCD camera with 1024 _ 256 pixels. Spectrometer
molar ratio. The structural properties have been analyzed in detail by X-ray diffraction (XRD), the patterns shown improvement in the quality and size of the ternary crystals with increasing
with (25%) doped of energy (800mJ) with number of pulses (1000), X–ray diffraction measurements for sample showed that has polycrystalline structures, cubic & orthorhombic CdS structure, tetragonal & monoclinic TiO2…
tested for the esterification of oleic acid. Various techniques such as X‐ray diffraction, scanning and transmission electron microscopy, Brunauer–Emmett–Teller (BET) method, infrared spectroscopy, were employed
nano-flowers- like structures was successfully synthesized by solvothermal method. The X-ray diffraction analysis of the materials revealed the orthorhombic structure V2O5. No other peaks from the white hibiscus
were studied in vitro on the scaffolds’ surface. Samples were characterized by X-Ray Diffraction (XRD), Scanning Electron Microscopy (SEM) coupled with Energy Dispersive Spectroscopy (EDS), Attenuated Total Reflectance
electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDX), optical microscopy (OM), X-ray diffraction (XRD), and Raman spectroscopy (RS). The mechanical properties were evaluated by compression tests. The…
auto-combustion technique. The as-prepared samples were characterized by X-ray diffraction (XRD) and SEM. XRD analysis confirms the cubic spinel structure with appearance of secondary phase
were synthesized by solid state reaction. X-ray diffraction (XRD) patterns for all the samples almost match with standard pattern of SmCrO3. The complex dielectric properties of the ceramic samples
been investigated for the pure phase of Mo2C and MoC. For example, X-ray diffraction (XRD) measurements have been performed to get information about the structure and phases obtained
methods that have been developed for reconstruction of electron density against CuKα X-ray diffraction data. These methods are Bond-Oriented Deformation Density Model (BODD), Our study showed agreement between
formation of long-period layered complex martensitic structures with lattice twinning on cooling. Electron diffraction and x-ray diffraction studies performed on two copper based CuZnAl and CuAlMn alloys show ... they…
photocatalyst were analyzed by Brunauer-Emmett-Teller surface area measurement (BET), X-ray diffraction (XRD), field emission scanning electron microscope (FESEM), UV-Vis diffuse reflectance spectra
reduced graphene oxide and the obtained composite was subjected to X-Ray powder diffraction (XRD) to know the particle crystallinity, size and structural aspects. The nano sized NiFe2O4 and NiFe2O4
charge spreading devices, chemical sensors, microelectronics, and electrochemistry. In addition to the X-ray diffraction investigations, the Raman, attenuated total reflectance (ATR ;) and Fourier Transform IR (FTIR)…
formation of the long periodic complex layered structures. In the present contribution, x-ray diffraction, transmission electron microscope and differential scanning calorimeter (DSC) studies were carried out on two…
gels was investigated by thermogravimetric and differential scanning calorimetry (TG-DSC) measurements. X-ray diffraction (XRD) analysis was performed for the characterization of phase purity and crystallinity…
charge spreading devices, chemical sensors, microelectronics, and electrochemistry. In addition to the X-ray diffraction investigations, the raman, attenuated total reflectance (ATR;) and fourier transform IR (FTIR) and…
capping agent and characterized by Fourier Transform Infrared Spectroscopy (FTIR) analysis whereas X-Ray Diffraction (XRD) was done to calculate the crystalline size of ZnO nanoparticles. The surgical glue prepared
synthesized samples were characterized by XRD and BET-BJH analysis. The X-ray diffraction results of the synthesized catalysts show the absence of impurities in the samples and the successful
stabilized with proteins and alcoholic groups. Moreover, scanning electron microscopy (SEM) and X-ray diffraction (XRD) data revealed that the AgNPs have variable shapes and an average particle size
For authors and organisers
Publish, present and keep up with your field
Find the right journal for your paper and submit your manuscript.