liquid phase and, consequently, prevents large amounts of energy being wasted evaporating water. Other pyrolysis processes require a dry feed; HTC reduces the energetic requirements to treat the TPOMW
extraction, have been investigated. In this study, the use of two pyrochars, obtained through pyrolysis (at 600Ã?°C) of solid anaerobic digestate, was investigated as alternative of detoxification
extraction, have been investigated. In this study, the use of two pyrochars, obtained through pyrolysis (at 600°C) of solid anaerobic digestate, was investigated as alternative of detoxification
type of fuel obtained by a thermochemical process which combines drying, thermal decomposition and pyrolysis of organic matter stages better known in the food industry as roasting. Such biofuel
coupled to Fourier transformed infrared spectroscopy or mass spectrometry (TGA-FTIR/MS) and pyrolysis gas chromatography mass spectrometry (Py-GC-MS). TGA-FTIR and TGA-MS are powerful tools
characteristics of a diesel engine fueled with plastic oil as fuel derived from the pyrolysis process. The blends of 15% waste plastic oil and 25% waste plastic oil with diesel
from the local available wastes by thermo-chemical biomass conversion processes, especially gasification and pyrolysis Gasification is the conversion of biomass into a combustible gas mixture by the partial oxidation
adsorption of the vehicular exhaust on the adsorbent. The adsorbent was prepared by slow pyrolysis of Sugarcane Bagasse at 600oC. Because of the increasing level of greenhouse gases
results of infrared spectrum and gas chromatography analysis showed that, after hydrothermal catalytic pyrolysis, the number of aromatic rings reduced, the content of ligh components increased, and the content
Deposited at 450 oC on silicon and porous silicon substrates by chemical spray pyrolysis in (150±5 nm) thickness. The structure of AZB nanostructure films has been found to exhibit
Nickel oxide doped Fe2O3 thin films have been prepared by spray pyrolysis technique on glass substrate temperature 400 ºC. The initial solution was including a 0.1 M/L for both
films of Cobalt doped cadmium oxide are deposited on a glass substrate by spray pyrolysis method. UV-Visible spectrophotometer was used in order to determine the absorbance spectrum
sprayed pyrolysis technique was carried out to prepare CuO thin films with different Mn-doping. Optical properties were calculated by recording the absorption spectra by UV-Visible spectrophotometer. The absorbance
thin film is successfully deposited on microscopic glass substrate at different temperatures by spray pyrolysis technique using InCl3 as precursor. The physical properties of these films are characterized
respectively. The thermal decomposition processes of the complexes under nitrogen include dehydration and pyrolysis of the ligands, and the final residue at about 480 °C is bismuthous oxide
Granular Activated Carbon) and Sand. The Eu-GAC was produced by thermal pyrolysis of Eucalyptus tree branches and leaves and the Sand was collected from El-Khums seaside. The influence
different preparation methods are applied (Solid State method-SS, Auto Combustion-AC and Spray Pyrolysis-SP) in order to produce a suitable single phase electrolyte materials. The target has been
optical properties. Some of the techniques such as solid state diffusion, flame and laser pyrolysis and sol-gel process are being employed to manufacture. The main advantages of nano phosphors
energy absorption of the endothermic breakdown of the polymeric constituents, transpiration cooling as the pyrolysis gases percolate from the interior of the material toward the surface, and re-radiation from
thermal decomposition processes of the zinc(II) complexes under air include dehydration and pyrolysis of the ligands, and the final residue is zinc oxide
soil washing, soil flushing, phytoremediation, and electrokinetics. Biochar (biologically derived charcoal) is produced by pyrolysis of biomasses under low oxygen conditions, and it can be applied for recycling organic…
Thermo gravimetric (TG-DTG) analysis was used to study the pyrolysis characteristics of biology-molding fuel (corn straw and bean straw) at different heating rates in a stream
For authors and organisers
Publish, present and keep up with your field
Find the right journal for your paper and submit your manuscript.