axis motion and position data acquisition. With the entered workpiece parameters, the measurement software system establishes a CAD model of the complex part, planes an automatic measurement path, and sends ... software…
sucrose. Optimal spectral domain selection and pre-treatments led to PLS calibration models with acceptable glucose results (Rcval2=0.90; SECV=0.98; RPD=3.03), less satisfactory for fructose and very good ... Sayajon A…
these variables, through the determination of intrinsic mechanical parameters. Gelatin gels (20% w/w) are used as a model system due to their simplicity and well known structure. Stress-strain ... stress and strain at…
overcome a significant challenge in the translation of these therapeutics. Control over process parameters afforded by microfluidics, allows optimization of nanoparticle quality and encapsulation efficiency. Automation…
using a scalable, reproducible microfluidic mixing platform. Optimization strategies and encapsulation of a hydrophobic model drug coumarin-6 were investigated. Rapid and controlled microfluidic mixing of an organic…
particle size. In addition, TEM technique was used to characterize nanoparticles. Subsequently, the model was adjusted to the 2x3 full-factorial experimental with the following variables Concentration ... were attained…
process development. Two liposome formulations of the hydrophobic photosensitizer verteporfin were produced as model systems and scaled up in batch volume by an order of magnitude. A process for liposome ... Benchtop…
weight (RBE2). The hypercholesterolemia model is made by giving high-fat high-fructose diet. Lipid profile is measured and One Way ANOVA is used for parameter analysis with significance
rate of 1 ml/min. All validation parameters were performed as per the guidelines of bioanalytical method validation. Weighted linear regression analysis was also performed on the calibration data ... models. One, two…
dose of the test and reference treatments were analyzed by a non-compartmental PK model using natural log transformed data and were compared by ANOVA for a two-treatment crossover ... between 80125% corresponding to the…
method. Non-compartmental model was used for pharmacokinetic analysis and statistical analysis. The 90% parametric confidence intervals for the lntransformed test/reference ratios of primary pharmacokinetic parameter…
process development. Two liposome formulations of the hydrophobic photosensitizer verteporfin were produced as model systems and scaled up in batch volume by an order of magnitude. A process for liposome ... Benchtop…
parameter via distribution map. However, protein prediction in ready-to-eat sausage has not been investigated. Objective: The objective was to establish a quantitative partial least square regression (PLSR) model
rock matrix. Due to the multi-scale of media, inertial coefficient is a key parameter to predict the correct production performances and behaviour of frac-vuggy reservoirs. This paper introduced ... play an important…
Clay modified models can represent the geomechanical behaviour of travertines. Parameters for these models are seldom found in the literature for travertines, reason being that carefully performed laboratory tests…
these fracture patterns on gas production using static simulations. A numerical shale gas model is developed based on Barnett rock and fluid properties. Two scenarios are investigated including continuous flooding…
volume and water saturation) were calculated in order to show the petrophysical parameters distribution. Facies reservoir model has been built to see the facies distribution in the Atthaday field. Some
with severely profound coagulopathies. Aims: To find out the efficacy of global coagulation assay parameters in predicting the severity of liver disease in ACLF patients. Methods: A prospective study approved…
five different solvents by using the Polarized Continuum Model (PCM) to look for the solvent effect on physicochemical and quantum chemical parameters. Also, the optimized geometry of each compound
developed with the objective of proving the technical and financial viability of a model for reutilization of residual water from a dairy plant, through the coagulation with aluminum sulfate ... resulted in absence of…
case of supply of organic fertilizers in conventional regime, a model of multivariate analysis, including ?15N and other quality parameters (TSS, TA, ascorbic acid, total polyphenols, ORAC units), can contribute
levels of temperatures (10 to 50oC). Rheological data were fitted to the three different models (Arrhenius, Ostwald-de Waele Power law and Newtonian-I) and analyzed. A continuous fall ... botanical environment and agro…
operating parameters: pH of the solution, adsorbent dosage and initial concentration were effective on the biosorption efficiency. The suitability of the Langmuir, Freundlich and Temkin adsorption models to the…
thermodynamic calculation provides the theoretical water dew point as a function of the process parameters. Considering that sensitive variables such as the composition of the multicomponent process stream have…
analysis and prediction. Starting with time series forecasting, this "multivariate" time series data is modelled using recurrent neural networks (RNN). The predictions are generated to identify the possibility ... real…
For authors and organisers
Publish, present and keep up with your field
Find the right journal for your paper and submit your manuscript.