with a triple-fluorescent reporter for motility, matrix production, and sporulation. We develop a calibration procedure for determining the biofilm thickness from the transmission images, which is based on Beer…
times of 150 ps, in order to calibrate a femtosecond delay line stage. The Aerotech PRO190SL/ SLE was used as the translation linear stage. This stage served as the main ... were added to the set-up to improve the…
when the densitometric scanning was implemented at 230 nm. The linear regression analysis data for the calibration plots showed r2 > 0.99 with a concentration range from 250 – 1500 ng/band ... phase ratio) as graphical…
better sensitivity for quantification, cation exchange column was used. A linearity coefficient of R2 >0.995 was observed in calibration over a wide range of concentration
simple, selective, linear, precise and accurate RP-HPLC method was developed and validated for rapid assay of Dobutamine in Bulk and Pharmaceutical tablet Formulation. Isocratic elution at a flow rate ... flow rate was…
method was validated as per ICH guidelines the parameters like linearity, accuracy and specificity were determined. Results: Calibration curve of bacoside A was generated, and the method was validated ... relationship…
hesperidin was found to be 4.01 min. Results: In validation studies, calibration curve was found to be linear over the range of 0.2-6 μg/mL with the regression coefficient
UHPLC method retention time was found to be 3.75min. The Calibration curve was found to be linear (r2=0.999) with concentration range of 10-50μg/ml. The Accuracy
HPLC). The calibration curve was found to be linear with the equations of y = 0.0445x + 0.006 and y = 57694x - 10767 with correlation coefficients of 0.9996 and 0.9994 (r2) over
validated by various parameters as per ICH and USP requirement. The calibration curve was found to be linear in range of 10-35μg/mL for Cetirizine hydrochloride
reflux). Good resolution between the peaks corresponds to degradation products. The calibration curves of Nabumetone showed good linearity in the concentration range 2 –100 μg/ml with UV detection
using either xylene cyanol FF (XCFFF) or safranin O (SO). The calibration graphs are found to be linear over 15.00–35.00 and 10.00–60.00 μg mL−1 with molar absorptivity
able to resolve the drug peak from formulation excipients. The calibration curve was noticed to be linear over the concentration range of 5-150 μg/ml (R2 = 0.9999). The method
Phosalone was used as internal standard (IS). The calibration curves of different pesticides are linear with concentrations ranging between 10 and 70 ppb with satisfactory correlation coefficients
detection of spot was carried out at 259 nm. The calibration curve was found to be linear between 100 to 400 ng/spot for Atorvastatin Calcium and Pioglitazone. The proposed
shooting system adapted to the aquatic environment and allowing a pool calibration using the DLT technique (Direct Linear Transform). This establishes the link between pixel and metric coordinates, which allows
properties mapping, the average Hounsfield unit (HU) within each of the calibration tubes was calculated and a linear curve was fitted to the points corresponding to HU and density values
detection of spots was carried out at 254 nm. The calibration curve was found to be linear between 1 to 6μg/ml for both drugs with a correlation coefficient
Validation parameters for the method were established following standard guidelines. The calibration curve was found to be linear over the range of 20 to 100 μg/ml with a correlation
time and speed fixed at 10 min, 4000 rpm respectively. The calculated calibration curves gave high-level linearity for all target analytes with correlation coefficients ranging between
values 0.21 and 0.36 for Telmisartan and Indapamide respectively. The calibration curve was found to be linear between 2000-7000 ng/spot for Telmisartan and 75-262.5 ng/spot
For authors and organisers
Publish, present and keep up with your field
Find the right journal for your paper and submit your manuscript.