electrical properties of polyaniline (PANi), nanocrystalline TiO2 and PANi: TiO2 nanocomposites The TiO2 powder of particle size 50–60 nm was synthesized by sol–gel technique and the polyaniline ... synthesized by…
produced by using powder technology in order to get an acceptable initial surface roughness. Also sample characterizations includes (scanning electron microscopy (SEM), X-ray diffraction (XRD), vitro test…
electronmicroscope (SEM) andX-ray powder diffraction. Thermogravimetric analysis (TGA) was used to follow up the thermal decomposition steps of the ligands and theirmetal complexes.Fromthe X-ray data, the crystal lattice
infrared (FT-IR) spectroscopy, X-ray diffraction (XRD) pattern, and Differential scanning calorimetry (DSC). The isolated starch was found to be creamy, crystalline, non-hygroscopic powder with yield of about
properties were analyzed by X-ray diffraction and ultraviolet-visible absorption spectroscopy. As a result, the optimal iron to cobalt doping ratio in bismuth titanate powder resulted
properties were analyzed by X-ray diffraction and ultraviolet-visible absorption spectroscopy. As a result, the optimal iron to cobalt doping ratio in bismuth titanate powder resulted
subjected to single crystal X-ray diffraction analysis, Fourier transform analysis, and UV-visible absorption measurement.SHG efficiency of the grown crystals were confirmed by Kurtz powder technique. The electrical…
final step, mixed powder was cold pressed and sintered at1600°C for 120 min. Crystal phase of the sintered samples were characterized by X-ray diffraction(XRD),the density
ferrite powder (MnFe2O4) were prepared by the wet chemical co-precipitation method and after-ward annealed in air. The effects of heat ... treatment temperature on crystalline phases formation, microstructure and…
methods and electric pulsed discharge sintering (also called spark Plasma Sintering or SPS). Composite powders were prepared by tip-sonication in isopropanol and/or by planetary ball milling under ... laser…
Copper (Cu) powder at 1000 °C. The copper has been added to improve it is electrical performance. The CCONW generated was examined using X-Ray Diffraction (XRD), Energy Dispersion X
removal has been investigated. The maximum experimental biosorption capacities for entrapped live and dead powdered fungal of Rhizomucor tauricus were found ... Freundlich adsorption isotherms. The biosorbents were…
xGdxSiO5:Dy3+;Pr3+ (x = 0, 0.5, 1.0, 1.5 and 2.0) in powders and thin film forms. The films were ablation deposited onto Si (100) substrates using the pulsed laser deposition ... type of laser pulse, and substrate…
X-ray diffractometry (PXRD) and differential scanning calorimetry (DSC) are employed to investigate the property of crystalline powders. In the case of PXRD, powders with crystal phase produce diffractive peaks…
single crystal X-ray diffraction, UV-Vis-NIR, TG/DTA and DSC analyses. The second harmonic generation of STB was measured by Kurtz and Perry powder technique. The laser damage
demonstrated by using powder extract of dry ginger rhizome (Zingiber officinale). The structural analysis has been carried out by using Ultra Violet-visible spectroscopy, X-ray diffraction, scanning electron microscopy
thermal decomposition powdered shells and synthesis through the formation of Precipitated Calcium Carbonate (PCC) of the shells. HAp synthesized result has been analyzed using X-ray Diffraction (XRD), scanning electron
this present work is evaluation of the effect of marble powder, which is an industrial discharge, in the adsorption of a direct “yellow 50” dye, used in traditional industries ... other hand, various techniques for…
x-ray diffraction(XRD), scanning electron microscopy(SEM), electron dispersive X-ray spectrometry(EDS), UV-visible spectrophotometry and FTIR spectroscopy. The results indicate that the synthesized powders are…
balls to powder (BPR) 30:1, under argon atmosphere. The alloy formation and different physical properties were studied as a function of milling time, using X-ray diffraction (XRD) technique
balls to powder (BPR) 30:1, under argon atmosphere. The alloy formation and different physical properties were studied as a function of milling time, using X-ray diffraction (XRD) technique
powder on 316L SS substrate was investigated using Field Emission Scanning Electron Microscope (FESEM) and Energy Dispersive X-ray Spectroscopy (EDAX). From the results of X-Ray Diffraction (XRD) study
powder compositions in a vibratory mill with an impact-shear loading were studied. The solid phase was investigated by the methods of X-ray diffraction, IR spectroscopy, scanning electron microscopy
enhancing property of this BNC?s. To support solubility analysis results, dissolution studies i.e. powder dissolution and in vitro dissolution were done. It was found that as concentration of polymer ... were…
For authors and organisers
Publish, present and keep up with your field
Find the right journal for your paper and submit your manuscript.