powder modified with citric acid treatment was investigated with respect to initial pH, contact time, initial metal ion concentration and biomass dosage. The adsorbent was characterized by Infrared Spectroscopy, X…
revs/min and ball to powder ratio (BPR) of 10:1. The milled powders were mixed in the composition of Nickel having 83 wt % and chromium, 17 wt %. This ... grain size, fracture surface and hardness were analyzed by scan…
cost combustion method. X-Ray Diffraction, UV-Vis spectroscopy, Photoluminescence (PL) spectroscopy, Scanning Electron Microscopy (SEM), Energy Dispersive Analysis of X-rays (EDAX) and Transmission Electron Microscopy…
more corrugated with the concentration of gallium hydroxide during the dry of GO powder. The graphene oxide structure was distorted due to the three hydroxyl groups of gallium hydroxide ... properties of wrinkled GO…
industry wood waste such as Haloxylon, Apricot pits and Pine were used to prepare powders of activated carbons by a simple chemical process and thermal activation. The physical properties ... chemistry of the activated…
powder interactions. In the present study, CO3 and flour substitution are proven by FT-IR and Raman spectroscopy. The microstructure of the 3D printed scaffolds is further characterized by X ... ray diffraction before…
biofuel. The nanoparticles, annealed at 10000o C for three hours, were characterized by X-ray diffraction, revealing a BODY CENTERED CUBIC structure. When excited with a 980 nm diode laser ... fingerprint. The…
ZnSe nanoparticles (NCs) have been successfully prepared via hydrothermal method using selenium and zinc powder as precursors at 190°C for different annealing times (5÷30 hour). The influence ... structure and optical…
several requirements, like grain and agglomerate size distribution or chemical composition for demanded binder-powder interactions. In the present study, CO3 2- and flour substitution are proven ... Raman spectroscopy…
with the highest Jc of bulk (Bi1.6Pb0.4)Sr2Ca2Cu3Oy(Co3O4)x were fabricated using the powder-in-tube (PIT) method. The tapes were heat-treated at 845oC ... microstructure and transport critical current density (Jc) of…
120m). The formation and morphology of MAPbI3 is showed from their powder XRD sample and field emission scanning electron microscopy (FESEM) snap shots. The optical band gaps ... samples are calculated from their…
films were adjusted based on the study performed on the ZnO xerogel powders. Structural and morphological features as well as the thermal behaviour of the samples were investigated by complementary ... including…
Electron Microscopy (SEM). Sample composition is confirmed using Energy Dispersive X-Ray Spectroscopy (EDS) and X-ray Diffraction (XRD). Results show nanomaterial Cu to have a much smaller grain size
treated GH and IM were characterized by particle size analysis, surface area analysis, X-ray diffraction (XRD), Differential scanning calorimetry (DSC), and Thermogravimetric analysis (TGA). Particle size results of…
metallurgy route and were sintered at 1200 ˚C for 6h, under 300 MPa by powder metallurgy method. Effect of the Nb concentration in Ti matrix and porosity level was examined ... alloys were analyzed by optical microscopy…
scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDX), optical microscopy (OM), X-ray diffraction (XRD), and Raman spectroscopy (RS). The mechanical properties were evaluated by compression tests
using a unique combination of mechanical alloying and Spark Plasma Sintering (SPS) techniques via powder metallurgy route. Rhenium was added to lower ductile-to-brittle transition temperature and to increase…
substrates. Then, their properties were characterized with different techniques. The morphology of the powders (before and after milling) and surface of thin film were characterized using scanning electron microscopy…
Abutilon indicum bark (AIB) powder as an adsorbent has been developed and studied its application in the removal of Cu(II) and Cd(II) metal ... ions from aqueous medium. The biosorbent was characterised by using FT-IR…
with LPEs at La3+ site. Experimental Method: The (La1-xBix)2Mo2O9 (x=0-0.2) powders were synthesized by solid-state reaction. The conditions of synthesis and sintering were 1173K ... hours in air, respectively. The…
solvent of acetone and water. The grown crystal is characterized by single crystal X-ray diffraction (XRD) and Fourier transform infrared spectroscopic analysis. The UV–Vis transmittance spectrum shows that ... entire…
transition metal oxides on varnish samples has been investigated. The nanoparticles prepared by powder metallurgy method, followed by calcination at 70℃. The nanoparticles of ZnO, Al2O3 and TiO2 added ... study the…
Nano-crystalline zinc-substituted cobalt ferrite powders, Co1-xZnxFe2O4 (X=0.0, 0.1, 0.3, 0.5, 0.7, 0.9 and 1.0), have been synthesized by the Co-precipitation method. The structural ... magnetic properties of the…
For authors and organisers
Publish, present and keep up with your field
Find the right journal for your paper and submit your manuscript.