ismost effective catalyst in gasoline steamreforming because it produced non-deactivatingcarbon. Ahigher thermal stabilityand graphitization degree of deposited carbonwere obtained onNi- Al2O3 and Co/Al2O3
range of 20-25nm. The nanocomposites were employed for modification of graphite paste electrodes and applied in electrochemical sensing of hydrazine. The results demonstrated that TiO2-AuNP1 exhibit better
respectively. Petrographical studies reveal that the marble contains calcite, dolomite, quartz, actinolite, phlogopite and graphite. Based on these characteristics, the marble from Obajana is suitable as raw materials…
landfill leachate by using proper operating condition. The best removal rates were obtained when graphite rod electrode was used as an anode, operating time is 120 min, voltage applied
interactions are the main drive forces between the quasi-aromatic imidazolium ring and pyrolytic graphite of CNTs in sample of C16MIM-CNTs-Pt. The interactions of intra-molecular hydrogen bonds
from polymer films with micro liquid phase on a carbon paste electrode composed of graphite powder and deep eutectic solvent, and monitored by open circuit potential method. The micro extraction
alloy and its hybrid composites. Constant 5%wt silicon carbide with variable %wt of graphite particulates using stir casting technique are highlighted. SEM study, hardnessnumber and ultimate tensile strength
conductivity of an insulating polymer can be achieved by dispersing conducting fillers (e.g., metal, graphite powder, carbon black, carbon fiber) in the polymer matrix. The resulting materials are referred
were made by atomic absorption spectrometry with flame (Cu, Se and Zn) and oven graphite (Mg). We analyzed 179, 204 and 197 spots in the G1, G2 and G3 respectively
Physics for 2010, managed to extract single-atom-thick crystallites/graphene from bulk graphite, a 3-D nanomaterial. The discovery of the extraordinary intrinsic properties of graphene (e.g. electronical, thermal
Since the first report on its isolation, a single atomic plane of graphite has become an attractive area of research in physics, chemistry and materials science. Today, graphene
electrolyte additives. We study the effect of electrolyte additive VC on parasitic reactions in Graphite/Lithium Nickel Manganese Cobalt Oxide (NMC) cells. Mechanical degradation can be avoided
sequential addition of sample after each pre excitation period, in presence of graphite as buffer. The improvement with respect to the other published procedures lies in the use of solid
major achievements related to the developments of electrochemical biosensors for health care. A reduced graphite oxide/Bismuth (RGO/Bi) nanocomposites has been used as electrode material for electrochemical detection
material selected was glass fiber reinforced polymer (E-glass/epoxy), carbon epoxy and graphite epoxy is used against conventional steel. The design parameters were selected and analyzed with the objective
A356.0 were stir cast by liquid metallurgy route with varied percentage of Alumina and Graphite. The composites were T6 treated and tested for microstructure and mechanical properties. Microstructure revealed uniform
this study, A356.0 alloys were reinforced with varied percentage of Alumina and Graphite by liquid metallurgy route and tested for Microstructure, Mechanical properties and Damping behaviour. Microstructure revealed…
Zinc-bromine flow battery stack consists of graphite bipolar plates and based on Nafion/PTFE composite membrane. Our battery stack is made up of three single batteries. The electrochemical behavior
material pasted on a thin foil of Aluminium that formed the cathode while graphite pasted on a thin foil of copper formed the anode of the spent lithium ion batteries
ELISA screening and the concentration of heavy metals were determined using a Perkin Elmer Graphite Furnace Atomic Absorption Spectrometer and Flow Injection Mercury System. Out of the 36 samples tested
Typha domingensis Pers., a typical wetland plant. SPMFCs were constructed with glass cells and graphite electrodes under natural environmental conditions. Electrical current production was 47.9 ± 10.98 mA/m2 with
electronic structure rapidly evolves with the number of layers, approaching the 3D limit of graphite already at 10 layers. Since graphene has unusual electronic properties, reduced dimensionality, and good stability
electro oxidation of alcohols in dichloromethane to the corresponding carbonyl compounds using graphite electrodes at room temperature. Electro oxidation resulted in high yield (83-99%) of aldehydes from primary alcohols
density residential area which is far from pollution sources. Lead was determined by Graphite Furnace Atomic Absorption Spectrometry (GFAAS) for each month for every site and ranged from
For authors and organisers
Publish, present and keep up with your field
Find the right journal for your paper and submit your manuscript.