study the torsional buckling and deformation behaviour of FML hollow shafts. Numerical investigation using ANSYS static and linear analysis was performed to validate the end and transition effects of torsional
column of 4 inch nominal size were designed and analyzed both manually and on ANSYS software. The results obtained from both methods were compared and found safe under available applied
work is done with CAE tools such as PRO-E WF2 (for modeling) and ANSYS 10 (for analysis).The results are presented and discussed with graphical comparisons
element model of the harvesting robot arm was established by utilizing the software of ANSYS Workbench. Three kinds of typical pose were selected, further more, the preceding six steps natural
performance. Disc brake model is done by CATIA and analysis is done by using ANSYS workbench. The main purpose of this project is to study the analysis of the stress
around the aircraft. The fluid flow simulations are obtained with the CFX software package ANSYS. We use the solver based on the Semi-Implicit Method for Pressure-Linked Equations (SIMPLE ... important part is the…
study. Temperature distribution over the glass is verified with Computational Fluid Dynamic approach using Ansys. The computational result is validating with the experiment work
intelligent design and optimization methods were proposed. This method took secondary development of ANSYS based on the Visual C++2010, and achieved the input of design parameters on the foreground
exchanger. CAD model is developed and computations are performed using commercially available CFD package ANSYS-CFX for the same boundary conditions, input conditions as that considered for experimental purpose. Obtained
reduce the weight of the structure using computer simulation. Design optimizer a tool in ANSYS helps in fast optimization satisfying the functional requirements. Totally 26 sets are obtained which satisfy
comparative study of the structures under past major earthquakes. Computer modeling is undertaken using Ansys is a multi-purpose software which enables to run and simulate tests or working conditions
static strength finite element analysis of excavator boom was carried through by using ANSYS, from which, the stress and strain deformation contour diagrams of three typical work condition were obtained
disc rotor design and analysis. Disc brake model and analysis is done using ANSYS workbench 14.5. The main purpose of this study is to analysis the thermomechanical behavior
floor with all edges clamped, subjected to uniform pressure loading is carried out in ANSYS workbench. The SPS floor simulation results are compared with traditional steel plate of with same
analyze the dynamic performance of the ultrasonic vibrating system, the finite element analysis package ANSYS is applied to optimize the structure design of the piezoelectric transducer vibration system. A serious
aimed at modeling the supersonic flow inside Scramjet engine using the Computational Fluid Dynamics ANSYS Fluent. The purpose of this test is to validate FLUENT's ability to predict reflecting
present work, spring back phenomenon with steel material is analysed using Finite element software Ansys. Two parameters are considered for finding the spring back effect. Initially the sheet metal thickness
parameters like von misses stress, von misses strain and displacement were obtained from ANSYS software. Compared to the former material the new material found to have less weight and better
stresses, developed during and after thermal cycling, were determined by using FEM software package (ANSYS).It was found that the tensile stress distributions in x- direction were dominant then
helmets features improved impact liners to meet Type II lateral impact requirements of standard ANSI Z89.1. Several manufacturers have also introduced technologies to dampen rotational forces known to cause brain…
response variables profiles. In this study, were used service packs of the commercially software ANSYS®. For each one of the proposed geometries a differential pressure and velocity analysis were done
build its finite element model. This model is automatically built by APDL (ANSYS Parametric Design Language) programming language of commercial finite element software ANSYS. The influence of geometric parameters…
For authors and organisers
Publish, present and keep up with your field
Find the right journal for your paper and submit your manuscript.