annealing of AgNWs before a layer of aluminum doped zinc oxide (AZO) is deposited. Microstructural characterization using scanning electron microscopy (SEM) and scanning transmission electron microscopy (STEM) revealed…
coated alloys showed superior oxidation resistance as compared to the bare materials. The detailed microstructural characterization using scanning electron microscopy (SEM), energy dispersive spectrometry (EDS)…
Chem. Lett. 43:128âÂ?Â?30. 3. Reyes SY, Serrato J, Sugita S (2013) Microstructural characterization of sanitaryware, the relationship spinel and mullite, Journal of Ceramic Processing Research
more reliable solder joints. Scanning electron microscopy (SEM), EDX spectroscopy has been used for microstructural characterization. Source measuring unit fitted with four probe station have been used for the electrical
Phase diagrams may simply be described as alloying maps in material science to help characterize microstructures and properties of engineering materials. However, the required thermodynamic background knowledge is…
process aged only and post-process solution heat treated and aged conditions. Microhardness and microstructural characterization was then conducted. Results of this investigation showed that an aluminum alloy containing…
Nanotechnology 17:4837-4841. 4. Simões S, Viana F, Reis MAL, Vieira MF (2016) Microstructural characterization of aluminum-carbon nanotube nanocomposites produced using different dispersion methods. Microscopy and…
flattened in order to reveal the differences between all stages of plastic deformation. The microstructural characterization was performed at each stage of processing and consisted of investigation using Transmission…
optimum bond angle resulted in superior bond strength and formability of HSLA tubes. Microstructural characterization of the samples was carried out using Light optical microscopy and Scanning electron microscopy…
adding Al and Ti powders to SiC laser deposited on Ti-6Al-4V. Microstructural characterization and phase analysis were carried out using SEM/EDS and XRD. Surface hardness was measured
silicon in a nickel-based chromium-rich alloy inspired from a commercial dental alloy.Casting,microstructure characterization,mechanical test by indentation and compression, and electrochemical corrosion experiments…
cobalt, was particularly high. The 75wt.%Ni- and the 75wt.%Cocontaining cast irons, the microstructure characterization of which were previously carried out, were here subjected to compression test, with comparison
material science. Human hair is basically a nano-composite biological fiber with well characterized microstructures. Different techniques and technologies have been employed to study the different characteristics of the…
carried out to achieve uniform distribution of the reinforcement Mechanical test like Hardness test, Microstructure characterization and wear study was conducted on the casted composites to know the effect
liberation size of Ilesha - Itagunmodi gold ore. It also carried out the chemical and microstructural characterization of the ore, and derived a froth flotation process route to upgrade
minimum microsegregation and high quality cast parts. This research is aimed to study the microstructure characterization andmicro-segregation of semi-solid processing gray cast iron. Increasing fraction of solid
GIXRD and cross-sectional HRTEM/EDS/SAED techniques were used for microstructural characterization of the studied surface alloys. The amorphous and nanocrystalline structure of the surface Ti-Ta-Ni alloy
Engineering to produce useful duralumin pieces. The study process included: washing, drying, grinding, microstructural and morphological characterization, compaction, sintering and finally, microstructural and…
distribution and predicted progression of the microstructure were in line with the experimental characterization of the microstructure. In particular, tempering dominates at the inner layer of the bend, resulting
steel in a temperature range between 25 °C and 400 °C. The microstructure after deformation was characterized via optical microscopy. It was observed that the microstructure consists of mainly deformation
increase mechanical performances by using MWCTs as modifier. The MWCNTs change the microstructure of bitumen generally characterized by nano-meter sized aggregates of polar molecules (asphaltenes) organized in…
oxidized surfaces and affected sub-surfaces were analyzed. The bulk microstructures were also characterized to specify the microstructures at high temperature. The oxides were composed of an outer thick
vitality dispersive x-ray spectroscopy (EDS) could be a method able of factually characterizing the microstructure and spatial compositional variety of atomic fuel in threedimensions. The 3D visualization from ... gives…
then exposed at 1200°C for 50 hours. Their as-cast and aged microstructures were characterized by X-ray diffraction, electronic microscopy and image analysis. Calculationswere carried out with Thermo
For authors and organisers
Publish, present and keep up with your field
Find the right journal for your paper and submit your manuscript.