Surface Roughness(SR). Number of experiments to be conducted is based on Taguchi orthogonal array with three level and three factors. The outcomes are expected to increase MRR, improve surface
selected for this purpose, and the experiments were performed in accordance with an L16 orthogonal array using Taguchi method. Analysis of variance (ANOVA) was used to investigate the statistical significance
using “pin on disk” apparatus. A plan of experiment based on L27 Taguchi orthogonal array is used to acquire the wear data. An analysis of variance is employed to investigate
minimum wear rate and coefficient of friction. The experiments were developed based on an orthogonal array, with the aim of relating the influence of sliding speed, applied load and sliding
method. The purification level was further enhanced by using Taguchi design of experiment orthogonal array. The purification of recombinant enzyme under optimized condition has enhanced 67.26% yield with fold…
technique is implemented for designing of experiments. The analysis is performed using a L9 Orthogonal array, and Investigation to find the effect of applied load, sliding speed and track diameter
Taguchi design of experiments (DOE) approach. Convectional turning experiments were done by using L16 orthogonal array for three input parameters viz. cutting speed, depth of cut and feed. The Taguchi
force as a criterion. The effects of machining parameters were investigated using Taguchi L18 orthogonal array. Optimal cutting conditions were determined using the signal-to-noise (S/N) ratio which
cutting fluid concentration (%) are optimized for power consumption as performance characteristic. L27 Orthogonal Array was used and analysis of variance (ANOVA) is also applied to identify most significant factor…
assisted extraction method and its chemical composition was analyzed by GC-MS. Using an orthogonal array design, we determined the optimal extraction conditions
farming huddling using clusters(k-means) and gives best result using classification(orthogonal array) from the databases to the farmers along with beneficial microbes to release nutrients to crops
Polyphenylene sulphide with 40% glass fiber (PPS),the experiments have been conducted using L9 orthogonal array in Minitab 16.0 software. Machining was done using diamond insert and measured the surface
results of the planned experiments, in order to optimize the dyeing factors. A L18 orthogonal array (seven factors in three levels) was employed to evaluate the effects of different parameters
chromium were investigated. The optimal conditions for the N-Y by single factor and orthogonal array design methods was as follows: 30 g/L gucrose, 5 g /L NaNO4
were investigated and optimized using a single-factor method followed by a L9 (34) orthogonal array design (OAD). The maximum absorption wavelengths for RhB and Rh6G
rate, and pulse on time, duty cycle on MRR. Keeping pressure constant, Taguchi‟s orthogonal array L9 has been effectively used to study the effect of independent process parameters
rotational speed; welding speed and tool diameter were taken as process variables. Taguchi L27 Orthogonal Array method was selected for conducting the experiments. Experiments were performed at rotational speeds
using Taguchi method, total three parameters are considered with mixed levels and L16 orthogonal array is generated .The optimum combination of input parameters for minimum Vonmises stresses are determined
reaction time (t2), each in three levels have been anlysed using Taguchi technique. L9 orthogonal array and analysis of variance (ANOVA) were applied to determine the optimum conditions
composition. The study employs CNC turning operation and Taguchi's L8 orthogonal array is used for experimental design. An attempt is made to optimise the effects of the three parameters
based Taguchi method. Experiments are designed and conducted based on Taguchi?s L 27 orthogonal array carried out under dry cutting conditions. The turning parameters are cutting speed, feed rate
terms of Surface roughness and productivity as material removal rate is measured. An orthogonal array of L3 was used and ANAOVA were performed to find out the significance of each
inaccuracy) of the drilled holes was measured using Coordinate Measuring Machine (CMM). Taguchi‟s orthogonal array and analysis of variance (ANOVA) were employed to study the influence of process parameters
electrode wear rate).A series of experiments were conducted according to an orthogonal array L18 based on Taguchimethod. The significant process parameters that affectedMRR and SR were determined
aging time, has three levels, respectively. The standard experiment layout 3 level orthogonal array (OA) L9 was considered. The interaction between the parameters was neglected. Solutionization is conducted
For authors and organisers
Publish, present and keep up with your field
Find the right journal for your paper and submit your manuscript.