Reactive Power Management using Firefly and Spiral Optimization under Static and Dynamic Loading Conditions
Power System planning encompasses the concept of minimization of transmission losses keeping
Articles, journals and conferences in one search. An exact title, DOI or ISSN is listed first.
In the search box: "exact phrase" · -leave out · OR · prefix* · title: author: journal:
Power System planning encompasses the concept of minimization of transmission losses keeping
reduction of power loss. The type-III DG is capable injecting both real and reactive powers. In this approach the locations are determined by the application of PSO while ... loss formula. The reduction of power…
designed to compensate both positiveand negative-sequence reactive power based on the so-called instantaneous power theory. Therefore, the compensated system behaves as a resistive network even in a reactive
quality in the distribution system. Synchronous reference frame is used to control reactive power and harmonics compensation due to non-linear loads. The cascaded multilevel inverter is controlled
versa. The systems react dynamically to changes in active and reactive power, influencing the magnitude and profile of the power systems voltage. Quite often it gives rise to a myriad ... achieve power flow…
static voltage stability and presents the effect of Static VAR compensator (SVC) on Voltage Profile & Reactive Power for variable load conditions is investigated and presents static methods like Modal Analysis
grid, and 2) Shunt active power filter for compensating distort current, harmonics at load side, reactive power support for load, load neutral current. These multifunction’s may be either accomplished
converter and also as a shunt active power filter to compensate current unbalance, load current harmonics, load reactive power demand and load neutral current. For this purpose, this paper analyses
minimize the system power loss and improve bus voltage profile. This paper presents the modeling and simulation results of Z-Source Inverter(ZSI) based Static Compensator (STATCOM).The IEEE Thirty ... present work…
method). The SAPF also called as ‘harmonic isolator’ is used for compensating the harmonics, for providing reactive power and for balancing asymmetrical loads. Instantaneous reactive current theory (id-iq method
voltage collapse. It is proposed in this work to investigate the proximity of power systems to voltage instability with special reference to the National Grid. This work describes real life ... paper after detection of…
Active and Reactive power supplied by the distribution side components plays a significant role in maintaining the power supply during the peak load and excess load conditions. Compensating elements ... excessively…
Reactive power planning (RPP) is one of the most important tasks to reduce power loss and ensure the system voltage quality in distribution network. The traditional RPP based ... level is pool economy and low equipment…
uses a Distribution STATCOM with fuzzy control. The DSTATCOM (Distribution Static Compensator) is used for reduction of reactive power and unbalance caused by various loads in distribution system. Fuzzy control
STATCOM which provides concurrent real and reactive series line compensation without using external electrical energy source. The UPFC is used here to improve power transmission capability by means of unconstrained…
error and see the impact of the voltage compensator buses. Voltage stability of a system is affected by reactive power limit of the system. FACTs devices improve the reactive power
active power compensation has become the major concern for the power system engineers. A small change in the active power flow gives negative impact on the entire power system parameters ... also contributing for the…
effective regulation methods, static synchronous compensator (STATCOM) has been widespread used to regulate dynamic reactive power and solve dynamic voltage stability problems into power-grid. Through the analysis of…
Instantaneous active and reactive power (p–q) control strategy is used for
compensator (STATCOM). In this project have the fast advance of high-capacity power-electronics technology, large commercial wind turbine generators can be practically employed to contribute high generated power…
type of inverter with Distribution static synchronous compensator (D-STATCOM) option to provide utilities with more control on active and reactive power transfer of distribution lines. The proposed inverter
which active and reactive powers vary with voltage with dependent of time. Voltages are maintained at desired levels by using minimum number of Static VAR Compensators (SVC) and PI controllers
CUPS) efficiently regulates all problems. In this project propose a Unified Power Quality Compensator (UPQC) Custom power device. This device develop to regulate the Voltage in the WF terminals ... based on the…
with average excess reactivity of 3.07 mK and 2.99 mK respectively. The power coefficient off reactivity was also found to be (0.113 mK/kW and 0.114 mK/kW) with ... necessary in order to compensate for the loss of…
Commission (IEC). The STATCOM provides reactive power support to hybrid system and load. The Battery Energy Storage System (BESS) is generally required to compensate the fluctuation generated by hybrid system
For authors and organisers
Find the right journal for your paper and submit your manuscript.