shows that failure occurred along the lower interior surface of the pipeline (6 o’clock position), with the failure path being rough with visible pits overlapping each other. The study
nature, a combination of multiple gradients in a periodic spindle-knot structure take on surface of spider silk after wetrebuilding process in mist. This structure drives tiny water droplets directionally ... rebuilt…
microscopy (AFM) and SEM. The surface of the coatings shows a honeycomb-like structure that exhibits a combination of micron-scale and nanoscale roughness, which endows it with its super ... that the coatings reduced…
cell responses. Most of these studies attempted to produce nanotopography by etching the surface to incorporate pores, grooves, and pillar structures. However, inconsistent topography, chemical functionalities and lack…
GNPs. Several coatings were developed with different surface morphologies. By isolating the effect of surface chemistry using a stearic acid treatment the significance and effect of the achieved morphologies…
characterize the influence of surface polarity. We find a strong influence of the pore diameter on the diffusion coefficient; only for pore diameters larger than roughly 1.6 nm, cisplatin assumes ... identify realistic…
human blood lymphocytes. With using AFM, we studied Young's modulus, adhesion strength and roughness of the cytoplasmic membrane of living blood lymphocytes in patients with diabetes. Peripheral blood lymphocytes…
open water areas in rough conditions. Our laboratory has developed a novel floating module for bio-utilization of crude oil and petroleum films from the surface of water areas
Zagros Orogenic Belt of Iran accommodates roughly one third of 25mm -1 north – south convergence between the Arabian and Eurasia plates. There is a strong belief that ... faults in the Zagros Orogenic Belt of Iran do…
pattern.. The SEM elucidates the surface morphology of the pure and VO2+ ions doped PVP films indicates a continuous microstructure is relatively rough of the polymer film, which suggests
main causes to the pathogenesis of implant-associated infections. Therefore, the improvement of implant surfaces is required to avoid the first stage for biofilm formation, bacterial adhesion. The current research…
transients on the co-sputtered catalyst surface were followed by femtosecond spectroscopy in the fs-ps region. By atomic force microscopy (AFM) the roughness of the co-sputtered
commercially pure titanium with rough (Ra=2-5 μm) CP microarc coating. The cultures were used: 2D with Jurkat T cells (JTCs) on plastic surface; 2D co-culture of JTCs
commercially pure titanium with rough (Ra=2-5 μm) CP microarc coating. The cultures were used: 2D with Jurkat T cells (JTCs) on plastic surface; 2D co-culture of JTCs
commercially pure titanium with rough (Ra=2-5 µm) CP microarc coating. The cultures were used: 2D with Jurkat T cells (JTCs) on plastic surface; 2D co-culture of JTCs
copper metal surface from the acid follows Temkin’s adsorption isotherm and also AFM image analysis was performed to obtain the average roughness from 2D and 3D morphologies
acoustic waves is roughly higher than that in an encompassing climate. Involved a femtosecond laser for removal in a vacuum, air and water for surface changes they showed that
metal sample surfaces under the impact of cavitation. The authors revealed the quantitative characteristics of structure transformations, as well as changes in microhardness, roughness, and subroughness of the samples
good positive correlation. The surface of the fabric with polyester textured filament yarn showed the uniform texture while fabric with cotton slub weft exhibited the rough texture. The results also
recognition events4. The identification and visualization of receptor binding sites on complex heterogeneous bio-surfaces such as cells and membranes are of particular interest in this context4. Considered ... arms to…
showing a typical Surface Plasmon Resonance (SPR) band at 422 nm from the UV-Vis spectrum. The TEM images show that formed nanoparticles were roughly spherical in shape with smooth
mean roughness, rms roughness and the 3-D morphology of the coatings obtained from Atom ic Force Microscopy (AFM) were us ed to correlate the surface energy changes
caused by bioturbation, surface runoff and/or canopy effect of the stands as well as anthropogenic intervention. Mean values of annual burial rate of 137Cs may roughly be estimated
number of rough endoplasmic reticula, lysosomes, and mitochondria was observed in the cytoplasm; the intercellular junction peculiar to epithelial cells was also seen on the cell surface. After treatment with
variation in surface morphology with RF power has been observed. It has been observed that the morphology of the films is correlated with the hardness, sp3 content, roughness, and contact
For authors and organisers
Publish, present and keep up with your field
Find the right journal for your paper and submit your manuscript.