This method is limited as the substrate may be of a similar composition but microstructurally dissimilar and controlling additional parameters such as the powder layer thickness is difficult
~0.2%) and Pb (0~0.2%) are the major heavy metals in MSWI-BA, but microstructures are different with different particles. The smaller the particle size is, the more
preparation allows to obtain a plastic mass for the preparation of hemosorbent with a microstructure. The carbon monolith is characterized by a large number of mesopores compared to similar sorbents
hydrogels can be applicable to microfluidic chips or biosensor devices as a sensing microstructured block in a microchamber of a biosensor chip. In this study, various microstructured PEG hydrogels ... irradiation…
optical properties of the synthesized CdSe quantum dots were confirmed using photoluminescence (PL). The microstructure and phase developments were measured by transmission electron microscopy (TEM) and X-ray…
difficult to align easy magnetization axis (c-axis) and to obtain homogeneous microstructure for enhancing magnetic performances. There has also been little significant research on one-dimensional
indium semi-spherical nanostructures with radii of around 175nm on silicon wafers into linear microstructures more than 2μm long in the direction of polarization of laser pulses (1.56μm, 150fs
difficult to align easy magnetization axis (c-axis) and to obtain homogeneous microstructure for enhancing magnetic performances. Th ere has also been little signifi cant research on one-dimensional
synthesized CdSe quantum dots were confi rmed using photoluminescence (PL). Th e microstructure and phase developments were measured by transmission electron microscopy (TEM) and X-ray diff ractometer (XRD) respectively
limit of nickel based superalloys. Mo-Si-B alloy comprised with the three phase microstructure of MossÃ?Â?Ã?¢Ã?Â?Ã?Â?Ã?Â?Ã?Â?Mo5SiB2 (T2)-Mo3Si ... produced respectively by powder metallurgy and reduction followed by…
clearly evidenced. These magnetic field modulated properties have been explained by the formation of microstructures due to electrostatic interactions between functionalized nanoparticles and biopolymer chains
additions would have on the corrosion resistance of the weld metal based on microstructural and mechanical properties. The microstructures of all 316L gas tungsten arc welding (GTAW) button samples
tempered 3D printed PEEK parts are presented. The mechanical properties as well as the microstructural state of the PEEK parts are reported and explained within the context of the tempering
strengths, enhanced durability and high temperature tolerance (400 o C) compared to cementitious material. Microstructure analysis showed more compactness, reduced porosity and development of new phases inside the…
enhanced the magnetic properties of Fe-Ce-B ribbons by engineering both microstructure and volume fraction of the Ce2Fe14B phase through optimization of the chamber pressure and the wheel speed
this study, we present their synthesis techniques, its challenges as well as proposed solutions. Microstructural characterization was performed using scanning electron microscopy, transmission electron microscopy…
temperatures have not yet been well understood due to the complex nature of thermal, microstructural interaction, or process parameters. In order to investigate these characteristics, tribotesters must be developed
corrosion products formed on SS-sprayed coating exhibit micro pores with a net-like microstructure. X-ray diffraction (XRD) revealed the presence of the composite oxide film on Ti-sprayed
Serafim A, Lungu A, Ţucureanu C, et al. (2017) Nanocomposite particles with improved microstructure for 3D culture systems and bone regeneration. J Mater Sci Mater
joints welded by these two wires are presented. The weld joints were characterized for microstructure, mechanical and fracture properties. The microstructure of the weld interface showed presence
shown that practically all physico-chemical factors influence the leaching process, and the microstructure of inorganic aqueous solutions should be considered as one of the important parameters of the technological
both these brittle ceramics. To reduce the brittleness, nano-crystalline B4C (n-B4C) microstructure with a homogenous distribution of nano-sized pores and amorphous carbon at grain boundaries
micro discharges, which accelerate the growth rate, densify the coating, meanwhile damage the coating microstructure and leave pinholes and cracks which are viewed as a major weakness of this technology ... which falls…
product quality matrices i.e. Q1 (qualitatively the same), Q2 (quantitatively the same) and Q3 (microstructure/ physical attributes of the topical dosage form) is critical to demonstrate that generic topical product
Inspiring from the microstructure of natural biological materials and using ball milling (BM) of Ti powder with stearic acid (SA) and the Spark Plasma Sintering (SPS) technique, an in-situ
For authors and organisers
Publish, present and keep up with your field
Find the right journal for your paper and submit your manuscript.