ûuorimetric detection. Under optimized conditions, the linear range of pazufloxacin mesilate was 2–36 ng mL–1, and the correlation coefficients of the calibration curves was 0.9998. The limits
this paper, two different multivariate calibration methods, feed-forward artificial neural networks (ANN) with back-propagation learning rule and Multiple Linear Regression (MLR) were applied to predict the logarithm…
rate of 1.0 ml/ min. The calibration graphs was prepared by injecting standards ranging from 0,5–20 ng/ml, giving an acceptable linearity (r = 0.999). Retention time of saxitoxin
intervals were recorded. The calibration of the electrode system was done potentiometrically by Gran’s method. Data were calculated using the linearization method with Henderson-Hasselbach equation. The obtained results
this paper, two different multivariate calibration methods, feed-forward artificial neural networks (ANN) with back-propagation learning rule and Multiple Linear Regression (MLR) were applied to predict the logarithm…
intervals were recorded. The calibration of the electrode system was done potentiometrically by Gran’s method. Data were calculated using the linearization method with Henderson-Hasselbach equation. The obtained results
procedure is designed based on inverse analysis in which macroscopic properties are used to calibrate parameters of cohesive crack model. Such approach is centered on a minimization of discrepancy function ... measured…
matter digestibility (IVDMD) using a calibrated NIRS (Foss 5000 apparatus and Win ISI II software). The collected data were subjected to a general linear model for a statistical analysis system
sensor selective for CTx-I molecule. Calibration experiments were performed using different known concentration samples and the reference curve was plotted. Complex non-linear least square (CNLS) curve fitting method
second method applies bivariate calibration method using 250 and 276 nm as an optimum pair of wavelength for cinnarizine and dimenhydrinate. The linear ranges
using a matrix-matched standard calibration curve, and validated according to Commission Decision 2002/657/EC and SANCO/10684/2009. The responses were linear in the range
with values obtained from the calibration graph. It was found that CDTA and EDTA buffers were the best TISABs as they produced a better linearity, slope and recovery in that
Category I requirements. Linearity for detector response was observed in the concentration range of 0.0045–27ppm and coefficient of determination (r2) for calibration curve was found exactly
within 0.5% deviation were obtained, linear correlation was found between the volumes of sea that would be needed to achieve different sea levels. The calibration curve revealed that
validation intends to investigate sensitivity, linearity, precision and accuracy, recovery, matrix effect, specificity and stability according to the European Medicines Agency (EMA) guideline. Standard calibration…
polyAb, a chip for the calibration curve, and a laser FL scanner. The analytical performance of FL immunochip PCT assay system was evaluated by linearity, interference, recovery, and imprecision tests
polyAb, a chip for the calibration curve, and a laser FL scanner. The analytical performance of FL immunochip PCT assay system was evaluated by linearity, interference, recovery, and imprecision tests
regression analysis helps establish calibration models correlating instrumental responses (e.g., absorbance, peak area) to the concentrations of analytes in samples. Common regression techniques include linear…
Also calibration curve for determination of the quantity of isolated from biological material was drawn. Sertraline in the case of a linear dynamic range of determination
quantitative analysis, and matrix calibration curves obtained with the external-standard method was used for quantitation of target analytes. Under optimized conditions, the linearity range
Calibration curves were plotted for method by using instrumental response at selected wavelengths and concentrations of analyte in the solution. Linearity for the detector response was observed in the concentration
Calibration curves were plotted for method by using instrumental response at selected wavelength and concentrations of analyte in the solution. Linearity for the detector response was observed in the concentration
aromatic) into biofuel. Five calibration curves were constructed using 3 absorption frequencies from the infrared spectra of the samples. The standard deviation, correlation coefficient, linearity range, limit of…
methyl bromide. To obtain calibration curves, the values of Rp - Rp0 were deduced, where Rp0 refers to Rp for [methyl bromide] equal 0. A large linear variation of ΔRp with
Calibration curves were plotted for the method by using instrumental response at selected wavelengths and concentrations of analyte in the solution. Linearity for the detector response was observed
For authors and organisers
Publish, present and keep up with your field
Find the right journal for your paper and submit your manuscript.