initial stage, active carriers: Zeolite 3A and Al2O3 were chosen. Acetylene and hydrogen in different ratios (1:1, 1:2, 1:3) (C2H2:H2) were used as initial feedstock ... carriers and nanosized catalysts during…
these AgPO3-patterned glasses lies on the fact that upon heating them to moderate temperatures the periodic structures are erased from the surface, i.e. rendering the glass suitable for infinite ... development of…
their different absorption depending on the orientation. Since the rotation of the nanoparticles depends strongly on the viscosity of the medium, which in turn depends on the temperature, the optical
means this photocatalyts is active also in a visible part of spectra. There are different procedures for g-C3N4 synthesis and the thermal polymerization of melamine ... furnace. The reported calcination temperature…
nature have a Double-diffusion convection, because of the existing salinity and temperature differences in various depths. As part of the ocean has a temperature inversion (temperature increasing with depth
ratio of 1: 1 (w / w) by the sol-gel method, then different concentrations of plasticizer were added (20%, 40% and 60%). For the formation of the films, the solutions ... placed in plastic Petri dishes and allowed to…
method and adding different amounts of zinc oxide nanoparticles (0.5,0.7,1% w/v) previously synthesized by the Priyadarsh method. For the formation of the nanocomposite films, the solutions were ... placed in Petri…
greenhouse. Hence, the system makes it possible to avoid the excessive deviation of the temperature inside the greenhouse and provides a favourable microclimate for the precocity of the culture. Sediment ... night. The…
grow in the presence of sodium chloride, sodium nitrite, sodium nitrate and at different temperatures. Their ability to ferment different carbohydrate was also assessed. These hurdles were used alone ... Buffalo meat…
concentration, composition surfactant and/or co-surfactant, temperature, etc. Previously, we produced well dispersed NPs supported on the different support materials by using our method, namely thermo-destabilization of…
feature of solid solutions of complex oxides with perovskite crystal structure is a small difference in the free energies of the ferroelectric and antiferroelectric states. Physical effects caused ... based solid…
extract in different concentrations (1, 2 and 3 mM). Subsequently, samples were incubated at different temperatures (20, 45 and 70ºC). FBNB extract along CuSO4 solution were the controls. Response surface
vitamins. Adsorption was determinates by formation of monolayer, multilayer and free Gibbs energy confirming different interactions. Scanning electron microscopy (SEM), was used in order to observe the morphology…
such as temperature and pressure significantly influence the tribofilm. XPS analyses were carried out before suspending the test and after changing the oil to assess the difference in chemical structure
composite fibers (FeCt) were prepared by simple co-precipitation method and two of its different concentrations (0.5 g and 1 g) studied for the removal of mercury, chromium, cobalt, lead ... fiber possessed highly…
homogeneity and stability. Pecchi et al. reported on synthesis of TiO2 under different gelation pH and calcination temperatures. In this work, we report on the novelty of combining two previously
process parameters used were three levels of catalyst concentration, three levels of reaction temperature, three levels of reaction time, three heating methods and two seeds conditions. In all the experiments…
heat transfer. Viscosity is one of the main properties which are sensitive to temperature and pressure variation. In the present work, based on the use of statistical techniques for regression ... using 76 data set of…
system, the presence and accumulation of gas hydrates when encounters high pressure and low temperature conditions can cause blockage of flowlines. Preventing the formation of hydrates by injecting thermodynamic…
were determined using SEC. The differences in mechanical performance were established, carrying out a mechanodynamic (DMA) and mechanostatic characterization (stress-strain at several temperatures and, Izod testing)…
conversation rate was increasing is â??_350/â??_80 =1.62 time, while the temperature has increasing in Nano-catalyst surface in this interval. The conversion reaction is take of more ... carbon-mono-oxide to…
operative and economic causes. The studied work included applying five commercial demulsifies at different temperature, demulsifier concentration and different brine concentration to heavy and moderate crude oil quality…
from three local clays of Ukpor, Auchi and Udi was carried out using three different acids (HCL, H2SO4 and HNO3) as precipitants. The leaching process involved preparation of the clay ... obtain the alumina yield. The…
efficient adsorbent. Native diesel fuel with sulfur contents of 0.8% was received in a temperature range between (250â??320°C) from fractional distillation of crude oil obtained from field ... containing 100 g adsorbent…
changes in the molecular conformation of the protein at denatured temperature during the heating process. In addition, there were differences between blended proteins and single protein, which would improve
For authors and organisers
Publish, present and keep up with your field
Find the right journal for your paper and submit your manuscript.