petrochemical process, catalytic cracking of naphtha (NCC) process requires extremely high energy consumption for separation of ethylene from ethane or propylene from propane mixtures by low-temperature distillation…
service life of the wind turbine and obtain the statistical characteristics of the crack growth due to fatigue at the base of the tubular structure; 5) Obtain fragility curves
grail of analytics in the process industry. Every big data solution has tried to crack the key to unlock predictive and prescriptive analytics, having the system to tell you what
compounds are obtained from petroleum through thermal and catalytic processes such as pyrolysis, thermal cracking, catalytic cracking, reforming and catalytic hydrogenation. These starting compounds are subjected to…
results indicated that the clad interface was continuous and straight without any porosity and crack, and a thin continuous interface layer with a small amount of Al2O3 particles were distributed
which increases with generator size. So far, most rings failed due to stress corrosion cracking under comprehensive action of stress concentration and corrosive environment. Thus, it is necessary to require ... times…
their high strength and ductility, ready weldability, high fracture toughness and a low fatigue crack growth rate down to cryogenic temperatures. Today stainless steels are also the dominant materials
which increases with generator size. So far, most rings failed due to stress corrosion cracking under comprehensive action of stress concentration and corrosive environment. Thus, it is necessary to require ... times…
attributed to the uniform dispersion of xGnPs and toughening mechanism such as xGnP bridging, crack deflection and strong interaction between xGnP and Al2O3 at the interfaces. Results
which biases the microstructural evolution and have the potential to cause serious defects like cracks. Experimental, analytical and numerical results will be presented on the crack growth in constrained sintering
results indicated that the clad interface was continuous and straight without any porosity and crack, and a thin continuous interface layer with a small amount of Al2O3 particles were distributed
compounds are obtained from petroleum through thermal and catalytic processes such as pyrolysis, thermal cracking, catalytic cracking, reforming and catalytic hydrogenation. These starting compounds are subjected to…
sinuous channel morphology characterized by river cliffs, river bank cavities, collapsing overhanging banks, tension cracks, slip-off slopes, sand bars and a braided river channel. The changing storage capacity
Varestraint weldability test. The experiments reveal that Waspaloy® has a higher susceptibility to hot cracking compared to Haynes® 282®. This conclusion is supported by increased total crack length ... when compared to…
chalking and yellowing due to weathering under sunlight. Also, after prolonged exposure to sunlight, cracking of the coating takes place. This leads to the exposure of metal substrate to corrosive
lower leg wounds are lower leg sprains and the staying 15% are lower leg cracks. General lower leg cracks constitute 9% of breaks and are the most widely recognized wounds
biological ways. Present article describes the processing of oil waste by light thermal cracking. Products of thermal cracking of oil waste, due to their properties, may be widely used
carbon yield, which is mostly associated to crosslinking, scission and cracking of bonds. The compositional, morphological and textural characterization of the CAGs precursor was carried out by Elemental Analysis
surface due to expansion the basaltic crustal layer was fragmented and through the expansion cracks widespread incidences of magma emission occurred forming rudimentary ocean basins. With further expansion these basins
semi-fluid mantle to swell up forming a number of long and sinuous expansion cracks. In consequence of such expansion, the sialic crust was fragmented in to several distinct continental ... fragments, while through the…
chrysotile and suggested the presence of polyhedral serpentine (spherical with alternating sectors of lizardite). Crack-seal microstructures displayed by chrysotile and brucite veins that were developed by extensional…
composition cannot come as S1 thus increasing the amount of S2 although the cracked S2 amount may not be very high. Calculation of the original TOC value is also made
marketable tubers and non- marketable tubers per plot, weight of top growth, number of cracks and holes per tuber were studied. Significant differences (P≤ 0.05) were observed among the sweet ... selection in sweet…
chemical processing are most expensive, ecologically dangerous technologies. In most cases creation of long cracks of hydraulic fracturing is unprofitable – gives low effect and leads to flood. I suggest ... apply the…
fibers are decreased to some extent and the surface is smooth and has no cracks which indicated that the CNCs are well dispersed in the PA matrix without significant aggregation
For authors and organisers
Publish, present and keep up with your field
Find the right journal for your paper and submit your manuscript.