ions is predominant. For a known acidity (pH 10), studies were conducted for different temperatures of the medium, which clearly indicate, that the experimental rate constant kobs, depends
minutes (p<0.01). Patientâ??s temperature of ICS group was more comfortable than that of CG group. GOS was not significantly different between groups (GOS of CB group
these temperatures. The drying kinetics of (Aquilaria malaccensis) leaves was investigated at different far-infrared drying temperature (40, 50 and 60oC). Besides that, the drying rate of the leaves were
partially converted to its corresponding thermally rearranged (TR) polymer by thermal treatments at different temperatures. The rearrangement reaction was performed at temperatures from 350 to 400 Ã?°C. Scanning electron
method-the LCST-TIPS process. The polymer solution was heated above the critical solution temperature to induce the phase inversion. Porous membranes from HPC/water and PVA systems were therefore ... linking…
flowering intensity in the following spring. Of the tested methods: WIS successfully raised air temperature, reduced bud damage and maintained high flowering intensity; similar effects were observed with ... damage…
when plants were grown under environmental conditions at whole growing season. The different responses to accumulated temperature were observed when the accumulated temperatures gave to the individual clusters while
tailored using different methods. First, by covalently bonded borate groups by thermal crosslinking at different temperatures; higher temperatures led to more crosslinking, thus controlling and narrowing the interspace…
conditions required to separate the contributions of the different layers (i.e. individual layer composition and thickness, hydrogen solubility and diffusivity, operating temperature) are analyzed. The interest of using…
sulfonation of 60%, owning distinct three-dimensional network structure due to containing additives with different number of acrylate groups were prepared via UV irradiation and tape casting in a self ... achieves the…
embedded ionic liquid phase. In this context, the effect of temperature, trans-membrane pressure difference and feed composition on the gas permeation properties and CO2/N2, SO2/CO2 separation performance…
synthesis were investigated. To do this, ZIF-8 particles were synthesized at different temperatures. The resulted ZIF-8 particles were characterized by particle size analyzer, SEM, XRD, N2 adsorption ... hybrid was…
utilizing alcohol (mainly ethanol) as a draw solution coupling with a low boiling point temperature regeneration process is proposed. The forward osmosis (FO) phenomenon is harnessed to generate a high ... permeable…
identify formulation viscosity values compatible with a spray device. Prototype spray formulations, containing different known mucoadhesive polymers, were prepared. The influence of polymer type and concentration on…
clay content ranging from 5 to 49%. As the soils were dried in a temperature-controlled room, sensor reported soil volumetric water content (?v) according to factory calibration was compared ... Sensor-reported ?v was…
photosynthesis were decreased, the antioxidant enzyme activities and the expression patterns of four different antioxidant enzyme genes were increased. SPD could increase melon-seedling growth, net photosynthetic rate…
decreased due to the decay and incorrect handling practices after harvest. Curing and storage temperature of sweet potato storage roots has been recognized as one of the most effective ways ... present study, we…
Physicochemical properties of dry matter and isolated starch from potatoes grown in different locations in Canada. Food Research International 57:89???94. 2. Pinhero RG, Waduge RN, Liu Q, Sullivan ... Resistant starch…
minimum of 160°C, held isothermally and then slowly cooled to room temperature. Thermal profiles were analysed and compared with data obtained using differential scanning calorimetry (DSC) and hot stage ... microscopy…
oceans, occurring at different latitudes and depths. Chemosynthesis often occurs in these areas, supporting biotic communities sustained by gases such as methane, generally at temperatures of ~2º - 4ºC. Such environments
less toxic than chemical surfactants, biodegradable, biocompatible and stable in extreme conditions of temperature and pH. However, mass production and application of BSF is still limited by the low production…
Natural gas hydrates are crystalline compounds that are formed under higher pressure and low temperature conditions when small gas molecules like methane and ethane get trapped within the water molecules ... Glycine…
century. Pharmaceutical pollutants (PPs) are a group of emerging anthropogenic hazard contaminants that contain different groups of human and veterinary medicinal compounds that are used widely all over the globe…
melting point that have a tendency to exist in a liquid state at ambient temperature. They are widely applied in green chemical processes due to their negligible vapor pressure ... rocking cell assembly (RC-5). The…
Methodology & Theoretical Orientation: Molybdenum carbide (Mo2C) based catalysts were synthesized over three different kinds of supports i.e., γ-Alumina (acidic), Activated Carbon (neutral) and Magnesium Oxide…
For authors and organisers
Publish, present and keep up with your field
Find the right journal for your paper and submit your manuscript.