experimentation and modelling of several designs of functionally graded NiTi alloys, including compositionally graded, microstructurally graded and geometrically graded NiTi structures, and the various techniques that…
Fe3O4) observed in the sintered Fe-Y2O3 and Fe-Ni-Y2O3 alloys. The microstructures of the alloys sintered at 1000Ã?°C revealed decrease in average grain size from
time of failure. The decarburization and triple point cracks were observed in the microstructures present study. Metallography, mechanical and corrosion testing was performed on the samples. It was found that
hypoeutectic Al-Si alloy at lubricated friction conditions at low loads that simulate the microstructural evolution during normal engine operation and can be a potential replacement of the expensive hypereutectic
CNTs/MnO2 composite film operated as an active layer. The surface morphology and microstructure of the CNTs and CNTs/MnO2 electrodes were characterized by scanning electron microscope-energy dispersive spectroscopy
Bang Hs, Bang HS, Kim YC, Oh IH (2011) A study on mechanical and microstructure characteristics of the STS304L butt joints using hybrid CO2 laser-gas metal arc welding. Materials
Na2SO4 and V2O5 and as corrosive molten salt for 40h at 1050Ã?ºC. The microstructure of the 4.5 YSZ coating showed that it was composed by a bimodal structure made
R.D.K. Misra , T. Mannering, D. Panda, S. Jansto: Effect of cooling rate on the microstructure and mechanical properties of Nb-microalloyed steels, Materials Science and Engineering
proposed a novel method based on low-energy mechanical alloying (LEMA). In general ODS microstructure is quite complex and several mechanisms contribute to the mechanical strengthening with different effects depending…
ultrasound, and an indirect chill casting process in a permanent mould results in a microstructure free of pores. The grain size, tensile mechanical properties and compression creep resistance were investigated…
effects on doping of high quality InAlAs for Quantum Cascade Laser structures. Superlattices and Microstructures 104:140-148. 2. Demir I, Robin Y, McClintock R, Elagoz S, Zekentes K, Razeghi ... InGaAs/InAlAs…
objective of the present study is to analyze the microstructure and mechanical properties of a TWIP steel at different temperatures. For this purpose, tensile tests were performed ... induced plasticity) steel in a…
alloy surface is affected to its solidification velocity. It is found that both the microstructural length-scale and the solubility of both elements into one another determine the wear response
conditions seen by the powder bed directly impact the densification mechanisms and, finally, the microstructure and working properties of the sintered bodies. In this context, the optimization and prediction ... results…
cause a change of electrical conductivity due to the orientation of elements of the microstructure and generate electron flow. The discrete character allows using pulse electric current for the organization
Hardness and strength results also reveal the rapid disappearance of the carbide in ferrite microstructure of the thinner walls. Stability was found in the hardness properties analyzed at the point
successively applied to the as-cast Mg at 400 ºC and consequently, the homogenous microstructure of the final microtube contains fine and ultrafine grains which causes high strength and high
alloys. One of the five is monophase alloy, consisting of sole Ti5Si3. Microstructure was examined by synchrotron X-rays diffraction and high resolution transmission electron microscopy. This alloy is almost ... MC3T3E1…
flour substitution are proven by FT-IR and Raman spectroscopy. The microstructure of the 3D printed scaffolds is further characterised by X-ray diffraction before and after sintering. Special highlight
Background: Osteoporosis (OP) is defined by low bone mass and microstructural deterioration. It is an escalating public health problem due to increase life expectancy and the resulting bone fractures represent
strength of the alloy occurred as a result of the intermediate cryorolling process. The microstructures of both the as-received and cryorolled alloy specimens, before and after impact loading were
For authors and organisers
Publish, present and keep up with your field
Find the right journal for your paper and submit your manuscript.