decreased methane and biogas production or even in complete inhibition of digestion process. Many different methods have been proposed that can solve this problem, such as dilution of the substrate ... removal of…
Сermets (metal-ceramic composites) are modern construction materials used in different branches of industry. Their toughness and heat resistance are determined by their elastic and thermo-physical properties. In…
fibers were isolated and characterized. Unsaturated polyester (UP) is reinforced with INF’s at different loadings and the resultant nano composites are characterized by mechanical testing, morphological studies, and…
temperatures studied. Physical adsorption mechanism was proposed from the adsorption parameters. Kinetic and thermodynamic parameters revealed that the adsorption process is spontaneous, exothermic and no significant…
requires the use of high strength containers. Liquid storage of hydrogen requires cryogenic temperatures and efficient insulation. Solid state storage offers the advantage of safer and more efficient handling…
suggests that A. fumigatus acts on different carbon source to produce different cellulolytic enzymes depending upon pH and temperature condition which somehow can relate with the enzyme produced by this ... strain that…
coordinated process that results in adaptation to life inside phagolysosomes. Quantitative phosphoproteomics revealed extensive differences in phosphorylation between promastigotes and amastigotes, and identified…
dispersed in solvent with different concentration of dimethylformamide (DMF) and films were dried at different temperatures. Tensile strength and electro-conductivity of the prepared MWCNT films were measured and their
luminophors compounds (RE2O2SO4) in the combustion process. NO2, SO2 species are released in the different temperatures and changed according to RE3+ ratio range and in higher concentrations during fast heating
radiation, and the radiation fluxes depend strongly on the temperature level. To obtain transient solutions numerical procedures such as finite difference and finite element methods, discrete ordinates with the method…
research was the investigation of (catalytic) hydrogenation of waste fatty acid mixture over different catalysts (sulphided or non-sulphided CoMo/Al2O3, NiMo/Al2O3, and Pt/Al-SBA-15 to valuable ... valuable products).We…
production of activated carbon (AC) from local biomass residues (barley straw). The low temperature (500ºC) pyrolysis process and the subsequent activation with carbon dioxide have resulted in a high micro…
opening the pulp structure. Bacterial enzymes are preferred as they can work at high temperature and pH at which the pulp is processed in industry. A number of these enzymes ... report have also reported the use of…
shows that the conversion of 4PG increases with temperature. The same trend was observed for pressure and residence time; however, 4PG conversion decreased with increasing liquid flow rate. Higher conversions ... from…
biphasic system. Comparatively high yield of 5-HMF and LA was found at the different composition of MIBK: Water. In case of MIBK: Water ratio 10:0, high yield ... Water ratio 9:1. A high efficient conversion of biomass…
Conventional methods of biodiesel production from microalgae involve different processes, including microalgae cultivation, harvesting, biomass drying, oil extraction and biodiesel production. Among these…
advantages in fast and stable fabrication of biodegradable microneedle by drying polymer at room temperature in a few minutes. Additionally, DAB method provides precise control of drug dose ... that can be used by the…
replacement of hexamine by catalytically active filler brings tangible benefits such as: lowering the temperature of the crosslinking, shortening the time of the hardening process, the reduction (or elimination ... used…
were prepared and characterized using three different chemical routes; sol-gel, hydrothermal, and combustion methods. The effect of calcination temperature on their properties had been generally investigated. ZnO NPs…
which act as a hydrophobic copolymer, while the copolymerization between N-isopropylacrylamide with a different molar concentration of VA and APA for producing thermo-responsive bi-functional polymer. They have…
energy difference among the amorphous and crystalline chains of PEF is higher than in PET poly (ethylene terephthalate) and contributes to PEF’s higher crystallization temperature. The 3D arrangement
different orders of magnitude, between the sputtering yield volume (nm3/primary ion) and the molecular weight Mw. This tendency can be related whether to the studied polymers glass transition temperature
will reflect positively on the thermal stabilities of the copolymers and to improve their different application efficiencies since they appear to have nanofiber structures. Their syntheses were confirmed by Fourier…
mixing, grinding and heating the components at 110ºC, 150ºC and 170ºC (to modify the different phases), whereas the tests were performed after submitting them ... construction products, reducing the energy consumption…
For authors and organisers
Publish, present and keep up with your field
Find the right journal for your paper and submit your manuscript.